Understanding the distribution of in-situ stresses is extremely important in a wide range of fields such as oil and gas exploration and development, CO2 sequestration, borehole stability, and stress-related geohazards...Understanding the distribution of in-situ stresses is extremely important in a wide range of fields such as oil and gas exploration and development, CO2 sequestration, borehole stability, and stress-related geohazards assessment. In the present study, the in-situ stress distribution in the Linxing area of eastern Ordos Basin, China, was analyzed based on well tested parameters. The maximum horizontal principal stress （SHmax）, minimum horizontal principal stress （Shmin）, and vertical stress （Sv） were calculated, and they were linearly correlated with burial depth. In general, two types of in-situ stress fields were determined in the Linxing area： （i） the in-situ stress state followed the relation Sv 〉 Snmax 〉 Shmin in shallow layers with burial depths of less than about 940 m, indicating a normal faulting stress regime; （ii） the Snmax magnitude increased conspicuously and was greater than the Sv magnitude in deep layers with depths more than about 940 m, and the in-situ stress state followed the relation Snmax 〉 Sv 〉 Shmin, demonstrating a strike-slip faulting stress regime. The horizontal differential stress （Snmax-Shmtn） increased with burial depth, indicating that wellbore instability may be a potentially significant problem when drilling deep vertical wells. The lateral stress coefficient ranged from 0.73 to 1.08 with an average of 0.93 in the Linxing area. The coalbed methane （CBM） reservoir permeability was also analyzed. No obvious exponential relationship was found between coal permeability and effective in-situ stress magnitude. Coal permeability was relatively high under a larger effective in-situ stress magnitude. Multiple factors, including fracture development, contribute to the variation of CBM reservoir permeability in the Linxing area of eastern Ordos Basin.展开更多
Rock masses in alpine canyon areas exhibit strong heterogeneity,discontinuity,and are subject to strong tectonic effects and stress unloading,leading to extremely complex distribution of in-situ stress.In addition,the...Rock masses in alpine canyon areas exhibit strong heterogeneity,discontinuity,and are subject to strong tectonic effects and stress unloading,leading to extremely complex distribution of in-situ stress.In addition,the occurrence of layered rock masses makes it more complex,with obvious anisotropic mechanical properties.This study proposes a comprehensive method for evaluating the stability of layered rock spillway tunnels in a hydropower station in an alpine canyon.First,the failure criterion and mechanical model of layered rock masses considering the anisotropy induced by the bedding plane and the true triaxial stress regime were established;an inversion theory and calculation procedure for in-situ stress in alpine canyon areas were then introduced.Finally,by using a self-developed numerical tool,i.e.CASRock,the stability of the layered rock spillway tunnel in a hydropower station was numerically analyzed.The results show that,affected by geological structure and stratigraphic lithology,there is significant differentiation in the in-situ stress in alpine canyons,with horizontal tectonic stress as the main factor.The occurrence of layered rock masses in the region has a significant impact on the stability of surrounding rock,and the angle between the bedding strike and the tunnel axis as well as the bedding dip both exert a significant influence on the failure characteristics of the surrounding rock.展开更多
The fluid-saturated porous layered(FSPL)media widely exist in the Earth's subsurface and their overall mechanical properties,microscopic pore structure and wave propagation characteristics are highly relevant to t...The fluid-saturated porous layered(FSPL)media widely exist in the Earth's subsurface and their overall mechanical properties,microscopic pore structure and wave propagation characteristics are highly relevant to the in-situ stress.However,the effect of in-situ stress on wave propagation in FSPL media cannot be well explained with the existing theories.To fill this gap,we propose the dynamic equations for FSPL media under the effect of in-situ stress based on the theories of poroacoustoelasticity and anisotropic elasticity.Biot loss mechanism is considered to account for the stress-dependent wave dispersion and attenuation induced by global wave-induced fluid flow.Thomsen's elastic anisotropy parameters are used to represent the anisotropy of the skeleton.A plane-wave analysis is implemented on dynamic equations yields the analytic solutions for fast and slow P waves and two S waves.Modelling results show that the elastic anisotropy parameters significantly determine the stress dependence of wave velocities.Vertical tortuosity and permeability have remarkable effects on fast and slow P-wave velocity curves and the corresponding attenuation peaks but have little effect on S-wave velocity.The difference in velocities of two S waves occurs when the FSPL medium is subjected to horizontal uniaxial stress,and the S wave along the stress direction has a larger velocity,which implies that the additional anisotropy other than that induced by the beddings appears due to horizontal stress.Besides,the predicted velocity results have the reasonable agreement with laboratory measurements.Our equations and results are relevant to a better understanding of wave propagation in deep strata,which provide some new theoretical insights in the rock physics,hydrocarbon exploration and stress detection in deep-strata shale reservoirs.展开更多
基金We would like to express our gratitude to the reviewers for offering constructive suggestions and comments which improved this manuscript in many aspects. This work was supported by the National Science and Technology Major Project （No. 2016ZX05066）, the National Natural Science Foundation of China （Grant Nos. 41702130, 41672149, and 41672146）, the Fundamental Research Funds for the Central Universities （2015XKZD07）, and Priority Academic Program Development of Jiangsu Higher Education Institutions （PAPD）.
文摘Understanding the distribution of in-situ stresses is extremely important in a wide range of fields such as oil and gas exploration and development, CO2 sequestration, borehole stability, and stress-related geohazards assessment. In the present study, the in-situ stress distribution in the Linxing area of eastern Ordos Basin, China, was analyzed based on well tested parameters. The maximum horizontal principal stress （SHmax）, minimum horizontal principal stress （Shmin）, and vertical stress （Sv） were calculated, and they were linearly correlated with burial depth. In general, two types of in-situ stress fields were determined in the Linxing area： （i） the in-situ stress state followed the relation Sv 〉 Snmax 〉 Shmin in shallow layers with burial depths of less than about 940 m, indicating a normal faulting stress regime; （ii） the Snmax magnitude increased conspicuously and was greater than the Sv magnitude in deep layers with depths more than about 940 m, and the in-situ stress state followed the relation Snmax 〉 Sv 〉 Shmin, demonstrating a strike-slip faulting stress regime. The horizontal differential stress （Snmax-Shmtn） increased with burial depth, indicating that wellbore instability may be a potentially significant problem when drilling deep vertical wells. The lateral stress coefficient ranged from 0.73 to 1.08 with an average of 0.93 in the Linxing area. The coalbed methane （CBM） reservoir permeability was also analyzed. No obvious exponential relationship was found between coal permeability and effective in-situ stress magnitude. Coal permeability was relatively high under a larger effective in-situ stress magnitude. Multiple factors, including fracture development, contribute to the variation of CBM reservoir permeability in the Linxing area of eastern Ordos Basin.
基金supported by the National Natural Science Foundation of China(Grant No.52125903).
文摘Rock masses in alpine canyon areas exhibit strong heterogeneity,discontinuity,and are subject to strong tectonic effects and stress unloading,leading to extremely complex distribution of in-situ stress.In addition,the occurrence of layered rock masses makes it more complex,with obvious anisotropic mechanical properties.This study proposes a comprehensive method for evaluating the stability of layered rock spillway tunnels in a hydropower station in an alpine canyon.First,the failure criterion and mechanical model of layered rock masses considering the anisotropy induced by the bedding plane and the true triaxial stress regime were established;an inversion theory and calculation procedure for in-situ stress in alpine canyon areas were then introduced.Finally,by using a self-developed numerical tool,i.e.CASRock,the stability of the layered rock spillway tunnel in a hydropower station was numerically analyzed.The results show that,affected by geological structure and stratigraphic lithology,there is significant differentiation in the in-situ stress in alpine canyons,with horizontal tectonic stress as the main factor.The occurrence of layered rock masses in the region has a significant impact on the stability of surrounding rock,and the angle between the bedding strike and the tunnel axis as well as the bedding dip both exert a significant influence on the failure characteristics of the surrounding rock.
基金the sponsorship of the National Natural Science Foundation of China(Grant Nos.42174139,41974119,42030103)the Laoshan Laboratory Science and Technology Innovation Program(Grant No.LSKJ202203406)+1 种基金the China Scholarship Council(Grant No.202206450050)the Innovation Fund Project for Graduate Students of China University of Petroleum(East China)(Grant No.23CX04003A)。
文摘The fluid-saturated porous layered(FSPL)media widely exist in the Earth's subsurface and their overall mechanical properties,microscopic pore structure and wave propagation characteristics are highly relevant to the in-situ stress.However,the effect of in-situ stress on wave propagation in FSPL media cannot be well explained with the existing theories.To fill this gap,we propose the dynamic equations for FSPL media under the effect of in-situ stress based on the theories of poroacoustoelasticity and anisotropic elasticity.Biot loss mechanism is considered to account for the stress-dependent wave dispersion and attenuation induced by global wave-induced fluid flow.Thomsen's elastic anisotropy parameters are used to represent the anisotropy of the skeleton.A plane-wave analysis is implemented on dynamic equations yields the analytic solutions for fast and slow P waves and two S waves.Modelling results show that the elastic anisotropy parameters significantly determine the stress dependence of wave velocities.Vertical tortuosity and permeability have remarkable effects on fast and slow P-wave velocity curves and the corresponding attenuation peaks but have little effect on S-wave velocity.The difference in velocities of two S waves occurs when the FSPL medium is subjected to horizontal uniaxial stress,and the S wave along the stress direction has a larger velocity,which implies that the additional anisotropy other than that induced by the beddings appears due to horizontal stress.Besides,the predicted velocity results have the reasonable agreement with laboratory measurements.Our equations and results are relevant to a better understanding of wave propagation in deep strata,which provide some new theoretical insights in the rock physics,hydrocarbon exploration and stress detection in deep-strata shale reservoirs.
