Stable and reversible zinc metal anode with fluorinated graphite nanosheets surface coating

A highly stable zinc metal anode modified with a fluorinated graphite nanosheets(FGNSs)coating was designed.The porous structure of the coating layer effectively hinders lateral mass transfer of Zn ions and suppresses dendrite growth.Moreover,the high electronegativity exhibited by fluorine atoms creates an almost superhydrophobic solid-liquid interface,thereby reducing the interaction between solvent water and the zinc substrate.Consequently,this leads to a significant inhibition of hydrogen evolution corrosion and other side reactions.The modified anode demonstrates exceptional cycling stability,as symmetric cells exhibit sustained cycling for over 1400 h at a current density of 5 mA/cm^(2).Moreover,the full cells with NH_(4)V_(4)O_(10)cathode exhibit an impressive capacity retention rate of 92.2%after undergoing 1000 cycles.

A review of the carbon coating of the silicon anode in highperformance lithium-ion batteries

In the development of rechargeable lithium ion batteries(LIBs),silicon anodes have attracted much attention because of their extremely high theoretical capacity,relatively low Li-insertion voltage and the availability of silicon resources.However,their large volume expansion and fragile solid electrolyte interface(SEI)film hinder their commercial application.To solve these problems,Si has been combined with various carbon materials to increase their structural stability and improve their interface properties.The use of different carbon materials,such as amorphous carbon and graphite,as three-dimensional(3D)protective anode coatings that help buffer mechanical strain and isolate the electrolyte is detailed,and novel methods for applying the coatings are outlined.However,carbon materials used as a protective layer still have some disadvantages,necessitating their modification.Recent developments have focused on modifying the protective carbon shells,and substitutes for the carbon have been suggested.

CoS Nanosheets Coated with Dopamine-Derived Carbon Standing on Carbon Fiber Cloth as Binder-Free Anode for Li-ion Batteries

Cobalt sulphides attract much attention as anode materials for Li-ion batteries(LIBs).However,its poor conductivity,low initial column efficiency and large volume changes during cycling have hindered its further development.Herein,novel interlaced CoS nanosheets were firstly prepared on Carbon Fiber Cloth(CFC)by two hydrothermal reactions followed with carbon coating via carbonizing dopamine(CoS NS@C/CFC).As a freestanding anode,the nanosheet structure of CoS not only accommodates the volume variation,but also provides a large interface area to proceed the charge transfer reaction.In addition,CFC works as both a three-dimensional skeleton and an active substance which can further improve the areal capacity of the resulting electrode.Furthermore,the coated carbon combined with the CFC work as a 3D conductive network to facilitate the electron conduction.The obtained CoS NS@C/CFC,and the contrast sample prepared with the same procedure but without carbon coating(CoS NS/CFC),are characterized with XRD,SEM,TEM,XPS and electrochemical measurements.The results show that the CoS NS@C/CFC possesses much improved electrochemical performance due to the synergistic effect of nanosheet CoS,the coated carbon and the CFC substrate,exhibiting high initial columbic efficiency(~87%),high areal capacity(2.5 at 0.15 mA cm−2),excellent rate performance(1.6 at 2.73 mA cm−2)and improved cycle stability(87.5%capacity retention after 300 cycles).This work may provide a new route to explore freestanding anodes with high areal specific capacity for LIBs.

Towards advanced zinc anodes by interfacial modification strategies for efficient aqueous zinc metal batteries

Developing sustainable and clean energy sources(e.g.,solar,wind,and tide energy)is essential to achieve the goal of carbon neutrality.Due to the discontinuous and inco nsistent nature of common clean energy sources,high-performance energy storage technologies are a critical part of achieving this target.Aqueous zinc metal batteries(AZMBs)with inherent safety,low cost,and competitive performance are regarded as one of the promising candidates for grid-scale energy storage.However,zinc metal anodes(ZMAs)with irreversible problems of dendrite growth,hydrogen evolution reaction,self-corrosio n,and other side reactions have seriously hindered the development and commercialization of AZMBs.An increasing number of researchers are focusing on the stability of ZMAs,so assessing the effectiveness of existing research strategies is critical to the development of AZMBs.This review aims to provide a comprehensive overview of the fundamentals and challenges of AZMBs.Resea rch strategies for interfacial modification of ZMAs are systematically presented.The features of artificial interfacial coating and in-situ interfacial coating of ZMAs are compared and discussed in detail,as well as the effect of modified interfacial ZMA on the full-battery performance.Finally,perspectives are provided on the problems and challenges of ZMAs.This review is expected to offer a constructive reference for the further development and commercialization of AZMBs.

Preparation and electrochemical lithium storage performance of porous silicon microsphere composite with metal modification and carbon coating

This work adopts a multi⁃step etching⁃heat treatment strategy to prepare porous silicon microsphere com⁃posite with Sb⁃Sn surface modification and carbon coating(pSi/Sb⁃Sn@C),using industrial grade SiAl alloy micro⁃spheres as a precursor.pSi/Sb⁃Sn@C had a 3D structure with bimetallic(Sb⁃Sn)modified porous silicon micro⁃spheres(pSi/Sb⁃Sn)as the core and carbon coating as the shell.Carbon shells can improve the electronic conductivi⁃ty and mechanical stability of porous silicon microspheres,which is beneficial for obtaining a stable solid electrolyte interface(SEI)film.The 3D porous core promotes the diffusion of lithium ions,increases the intercalation/delithia⁃tion active sites,and buffers the volume expansion during the intercalation process.The introduction of active met⁃als(Sb⁃Sn)can improve the conductivity of the composite and contribute to a certain amount of lithium storage ca⁃pacity.Due to its unique composition and microstructure,pSi/Sb⁃Sn@C showed a reversible capacity of 1247.4 mAh·g^(-1) after 300 charge/discharge cycles at a current density of 1.0 A·g^(-1),demonstrating excellent rate lithium storage performance and enhanced electrochemical cycling stability.

Surface Coating Enabling Sulfide Solid Electrolytes with Excellent Air Stability and Lithium Compatibility

All-solid-state lithium metal batteries(ASSLMBs)featuring sulfide solid electrolytes(SEs)are recognized as the most promising next-generation energy storage technology because of their exceptional safety and much-improved energy density.However,lithium dendrite growth in sulfide SEs and their poor air stability have posed significant obstacles to the advancement of sulfide-based ASSLMBs.Here,a thin layer(approximately 5 nm)of g-C_(3)N_(4)is coated on the surface of a sulfide SE(Li_(6)PS_(5)Cl),which not only lowers the electronic conductivity of Li_(6)PS_(5)Cl but also achieves remarkable interface stability by facilitating the in situ formation of ion-conductive Li3N at the Li/Li_(6)PS_(5)Cl interface.Additionally,the g-C_(3)N_(4)coating on the surface can substantially reduce the formation of H_(2)S when Li_(6)PS_(5)Cl is exposed to humid air.As a result,Li-Li symmetrical cells using g-C_(3)N_(4)-coated Li_(6)PS_(5)Cl stably cycle for 1000 h with a current density of 0.2 mA cm^(-2).ASSLMBs paired with LiNbO_(3)-coated LiNi_(0.6)Mn_(0.2)Co_(0.2)O_(2)exhibit a capacity of 132.8 mAh g^(-1)at 0.1 C and a high-capacity retention of 99.1%after 200 cycles.Furthermore,g-C_(3)N_(4)-coated Li_(6)PS_(5)Cl effectively mitigates the self-discharge behavior observed in ASSLMBs.This surface-coating approach for sulfide solid electrolytes opens the door to the practical implementation of sulfide-based ASSLMBs.

Carbon-coated ZnO Nanocomposite Microspheres as Anode Materials for Lithium-ion Batteries

The carbon-coated ZnO nanospheres materials have been synthesized via a simple hydrothermal method.The effect of carbon content on the microstructure,morphology and electrochemical performance of the materials was investigated by XRD,Raman spectroscopy,transmission electron microscopy,scanning electron microscopy and electrochemical techniques.Research results show that the spherical ZnO/C material with a carbon cladding content of 10%is very homogeneous and approximately 200 nm in size.The electrochemical performances of the ZnO/C nanospheres as an anode materials are examines.The ZnO/C exhibits better stability than pure ZnO,excellent lithium storage properties as well as improved circulation performance.The Coulomb efficiency of the ZnO/C with 10%carbon coated content reaches 98%.The improvement of electrochemical performance can be attributed to the carbon layer on the ZnO surface.The large volume change of ZnO during the charge-discharge process can be effectively relieved.

FAILURE ANALYSIS OF PEELING PROCESS FOR TITANIUM ANODES COATINGS

ＦＡＩＬＵＲＥＡＮＡＬＹＳＩＳＯＦＰＥＥＬＩＮＧＰＲＯＣＥＳＳＦＯＲＴＩＴＡＮＩＵＭＡＮＯＤＥＳＣＯＡＴＩＮＧＳＴａｎｇＤｉａｎ；ＣｈｅｎＳｈｉｒｅｎ（ＩｎｓｔｉｔｕｔｅｆｏｒＭａｔｅｒｉａｌｓＲｅｓｅａｒｃｈ，ＦｕｚｈｏｕＵｎｉｖｅｒｓｉｔｙ，Ｆｕ...

Improvement of stability of trivalent chromium electroplating of Ti based IrO_2+Ta_2O_5 coating anodes

The preparation process and properties of the thermally prepared Ti anodes coated with IrO2+Ta2O5 was studied. The structure and morphologies of the IrO2+Ta2O5 coatings were determined by XRD and SEM. Their electrochemical properties were studied by polarization curve and cyclic voltammetry. Trivalent chromium electroplating using Ti/IrO2+Ta2O5 anodes is carried out and the results were analyzed. Results show that this anode exhibits excellent electrochemical activity and stability in sulfate electrolysis. The electrocatalytic activity is determined not only by the content of IrO2 but also the structure and morphology of the anode coatings. The electroplating results indicats that Ti/IrO2+Ta2O5 anodes have excellent capabilities and merits in improving the stability of trivalent chromium electroplating in sulfate system.

Influence of carbon coating on the electrochemical performance of SiO@C/graphite composite anode materials

Silicon monoxide(SiO) has been considered as one of the most promising anode materials for next generation highenergy-density Li-ion batteries(LiBs) thanks to its high theoretical capacity. However, the poor intrinsic electronic conductivity and large volume change during lithium intercalation/de-intercalation restrict its practical applications. Fabrication of SiO/C composites is an effective way to overcome these problems. Herein, a series of micro-sized SiO@C/graphite(Si0@C/G) composite anode materials, with designed capacity of 600 mAh·g-1, are successfully prepared through a pitch pyrolysis reaction method. The electrochemical performance of SiO@C/G composite anodes with different carbon coating contents of 5 wt%, 10 wt%, 15 wt%, and 35 wt% is investigated. The results show that the SiO@C/G composite with15-wt% carbon coating content exhibits the best cycle performance, with a high capacity retention of 90.7% at 25℃ and90.1% at 45 0 C after 100 cycles in full cells with LiNi0.5Co0.2Mn0.3O2 as cathodes. The scanning electron microscope(SEM) and electrochemistry impedance spectroscopy(EIS) results suggest that a moderate carbon coating layer can promote the formation of stable SEI film, which is favorable for maintaining good interfacial conductivity and thus enhancing the cycling stability of SiO electrode.

MXene-assisted polymer coating from aqueous monomer solution towards dendrite-free zinc anodes

Coating polymer on the surface is an effective way to realize functional modification of the materials for diverse applications,which has been proved to enhance the stability of metal anodes in batteries.However,given the limited operability of coating from polymer dispersions,it is imperative to develop simple aqueous-based strategies from monomers for versatile polymer coating.Herein,a Ti_(3)C_(2)Tx MXene-assisted approach is proposed to construct polymer coating on zinc metal surfaces directly from the aqueous solution of monomers in an ice bath.By combining a doctor-blading method with spontaneous polymerization of monomers on the substrates at room temperature,a uniform,adhesive,and versatile coating layer assisted by a small amount of MXene is produced in one step.Additionally,MXene nanosheets serve as nanofillers to further enhance the mechanical strength and ionic conductivity of the polymer coating.Benefiting from good film formation and improved interfacial contact,the coated zinc anode exhibits a long cycling lifespan of over 1900 h.The assembled full cells show excellent cycling stability with a high capacity retention of 85.0%at 16 A g^(-1)over 2600 cycles.This work provides a simple and efficient way to produce polymer coatings directly from monomers,which may give new insights into design multifunctional polymer coatings for various applications.

Interface Reversible Electric Field Regulated by Amphoteric Charged Protein-Based Coating Toward High-Rate and Robust Zn Anode

Metallic interface engineering is a promising strategy to stabilize Zn anode via promoting Zn^(2+) uniform deposition.However,strong interactions between the coating and Zn^(2+) and sluggish transport of Zn^(2+) lead to high anodic polarization.Here,we present a bio-inspired silk fibroin(SF)coating with amphoteric charges to construct an interface reversible electric field,which manipulates the transfer kinetics of Zn^(2+) and reduces anodic polarization.The alternating positively and negatively charged surface as a build-in driving force can expedite and homogenize Zn^(2+) flux via the inter-play between the charged coating and adsorbed ions,endowing the Zn-SF anode with low polarization voltage and stable plating/stripping.Experimental analyses with theo-retical calculations suggest that SF can facilitate the desolvation of[Zn(H_(2)O)_(6)]^(2+) and provide nucleation sites for uniform deposition.Consequently,the Zn-SF anode delivers a high-rate performance with low voltage polarization(83 mV at 20 mA cm^(−2)) and excellent stability(1500 h at 1 mA cm^(−2);500 h at 10 mA cm^(−2)),realizing exceptional cumulative capacity of 2.5 Ah cm^(−2).The full cell coupled with Zn_(x)V_(2)O_(5)·nH_(2)O(ZnVO)cathode achieves specific energy of~270.5/150.6 Wh kg^(−1)(at 0.5/10 A g^(−1))with-99.8% Coulombic efficiency and retains~80.3%(at 5.0 A g^(−1))after 3000 cycles.

A one-for-all strategy of polyimide coating layer for resolving the comprehensive issues of phosphorus anode

Phosphorus is a promising anode with high capacity (2596 mAh g^(-1)and 6075~6924 mAh cm^(-3)),low lithium-ion diffusion barrier (0.08 e V),and appropriate lithiation potential (~0.7 V vs Li+/Li).However,it faces the problems of huge volume expansion (~300%),low electronic conductivity (10^(-14)~10^(2)S cm^(-1)),soluble intermediates (lithium polyphosphides,Li_(x)Ps),degradation in air,and low thermal stability.In this work,phosphorus/carbon nanotube composites were coated with a polyimide layer,which plays the roles of a buffer layer to relieve the volume expansion of phosphorus,an obstruct layer to confine LixPs,an inert layer to prevent the degradation of phosphorus in air,a heat resistant layer to improve the thermal stability of the anode.The resulting composites (P/CNT@PI) display high capacity retention of798.1 m Ah g^(-1)after 150 cycles at 1 A g^(-1),achieving 17 times as much as the control sample (P/CNT).

Properties of Al/Conductive Coating/α-PbO2-CeO2-TiO2/β-PbO2-WC-ZrO2 Composite Anode for Zinc Electrowinning

The properties of Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-WC-ZrO2 composite anode for zinc electrowinning were investigated. The electrochemical performance was studied by Tafel polarization curves（Tafel）, electrochemical impedance spectroscopy（EIS） and corrosion rate obtained in an acidic zinc sulfate electrolyte solution. Scanning electron microscopy（SEM）, X-ray diffraction（XRD）, and energy dispersive X-ray spectroscopy（EDXS） were used to observe the microstructural features of coating. Anodes of Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2, Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-WC, Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-ZrO2, and Pb-1%Ag anodes were also researched. The results indicated that the Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-WC-ZrO2 showed the best catalytic activity and corrosion resistant performance; the intensity of diffraction peak exhibited the highest value as well as a new PbWO4 phase; the content of WC and ZrO2 in coating showed the highest value as well as the finest grain size.

Extended Anode Effect for Tube Inner Coating of Non-Conductive Ceramics by Pulsed Coaxial Magnetron Plasma

For uniform tube inner coating of non-conductive thin films, the double-ended coaxial magnetron pulsed plasma (DCMPP) method was investigated. In this study, coating of TiN and TiO2 was performed. It was clearly shown that the extended anode effect was strongly influenced by the electric resistance of the coated thin films on the inner surface of an insulator tube. Additionally, high frequency (100 kHz) was better for relatively high plasma density. On the other hand, in the case of titanium oxide deposition, negative ion productions drastically decrease the deposition rate and the shifting velocity of plasma main position for coated TiO2 films.

Ti Anode with Ti-Mn Coating

A new type anode, Ti anode with Ti-Mn coating, has been used to prepare EMD (Electrolytic Manganese Dioxide) by some Chinese manufacturers for 4 years. The industry test shows that this anode has such characteristics as sturdy, light, fine mechanical performance, very high passivation resistance and corrosion resistance. The passivation of this anode is discussed and the results show that this anode is better than the pure titanium anode in the EMD industry.

Effect of rare earth Eu on anti-passivation of metal oxide anode coating

The anti passivation effect of metal oxide anode coating doped with rare earth element Eu was discussed. The morphology and the composition distribution of the metal oxide coating anode before and after electrolysis were studied by SEM and EDX analyses. The results show that the erosion of the electrolyte at the defects is the main cause for the failure of the coating. The erosion rate of the electrolyte is anisotropic. In area with high density of defects, the erosion rate is very fast and the failure of the coating is very quick. Moreover, the life time of the coating is prolonged by the doping of Eu. [

Electrochemical behavior of mesh and plate oxide coated anodes during zinc electrowinning

The catalytic performance of two oxides coated anodes （OCSs） meshes and one OCA plate was investigated in a zinc electrowinning electrolyte at 38 ℃. Their electrochemical behaviors were compared with that of a conventional Pb-0.7%Ag alloy anode. Electrochemical measurements such as cyclic voltammetric, galvanostatic, potentiodynamic, open-circuit potential （OCP） and in situ electrochemical noise measurements were considered. After 2 h of OCP test, the linear polarization shows that the corrosion current density of the Ti/（IrO2-Ta2O5） mesh electrode is the lowest （3.37μA/cm^2） among the three OCAs and shows excellent performance. Additionally, after 24 h of galvanostatic polarization at 50 mA/cm^2and 38 ℃, the Ti/MnO2mesh anode has the highest potential （1.799 V）, followed by the Ti/（IrO2-Ta2O5） plate （1.775 V） and Ti/（IrO2-Ta2O5） mesh （1.705 V） anodes. After 24 h of galvanostatic polarization followed by 16 h of decay, the linear polarization method confirms the sequence obtained after 2 h of OCP test, and the Ti/（IrO2-Ta2O5） mesh attains the lowest corrosion current density. The Ti/（IrO2-Ta2O5） mesh anode also shows better performance after 24 h of galvanostatic polarization with the overpotential lower than that of the conventional Pb-Ag anode by about 245 mV.

Recent advances in interfacial modification of zinc anode for aqueous rechargeable zinc ion batteries

To tackle energy crisis and achieve sustainable development, aqueous rechargeable zinc ion batteries have gained widespread attention in large-scale energy storage for their low cost, high safety, high theoretical capacity, and environmental compatibility in recent years. However, zinc anode in aqueous zinc ion batteries is still facing several challenges such as dendrite growth and side reactions(e.g., hydrogen evolution), which cause poor reversibility and the failure of batteries. To address these issues, interfacial modification of Zn anodes has received great attention by tuning the interaction between the anode and the electrolyte. Herein, we present recent advances in the interfacial modification of zinc anode in this review. Besides, the challenges of reported approaches of interfacial modification are also discussed.Finally, we provide an outlook for the exploration of novel zinc anode for aqueous zinc ion batteries.We hope that this review will be helpful in designing and fabricating dendrite-free and hydrogenevolution-free Zn anodes and promoting the practical application of aqueous rechargeable zinc ion batteries.

Preparation and Corrosion Resistance of Anodic Oxidation Coatings on 2198 and 5A90 Al-Li Alloys

2198 and 5A90 Al-Li alloys were anodized with a constant DC potential in 18%H_2SO_4solution(Solu.A) and the mixture solution of 18%H_2SO_4+5%C_2H_2O_4(Solu.B) at room temperature. 12 and 11 V was optimized as the applied oxidation potential for 2198 and 5A90 alloys, respectively. Cross-sectional morphology, surface morphology and elements distribution of anodic oxidation coatings were observed by scanning electron microscope equipped with energy dispersive X-ray analysis(SEM/EDX). Corrosion resistance was tested by potentiodynamic polarization plot in 3.5%NaCl solution. The results showed that the thicknesses of coatings obtained at the selected potential in Solu.A and Solu.B were about 50 μm/110 μm for 2198 alloy and 80 μm/110 μm for 5A90 alloy. In both solutions, anodic oxidation coatings of 2198 alloy were primarily composed of Al oxides; those of 5A90 alloy were mainly consisted of Al oxides and a small amount of Mg oxides. The results of potentiodynamic polarization showed that anodic oxidation coatings of 2198 and 5A90 Al-Li alloys had better corrosion resistances than that of untreated alloys.