Control of Pinhole Defects Formation in Semi-flexible Coaxial Cable by Vertical Tin-Plating Process

Holistic tin-plating on the outer conductor is one of the key processes in the manufacture of semi-flexible coaxial cable, which is widely applied to the third generation (3G) mobile communication system. However, in the traditional horizontal tin-plating process, disadvantages such as the pinhole defects and low productivity effect cannot be avoided. In this paper, a vertical tin-plating process was proposed to reduce the pinhole defects and improve the tincoating quality. Compared with the traditional horizontal tin-plating process, the immersion length was reduced from 300-400 mm to 10-100 mm and the tin-plating time was reduced from 7 s to 3 s in the proposed method. The experimental results indicate that immersion length and time are key parameters for the tin-plating quality. With this new tin-plating process, the experimental results show that the pinhole defects can be eliminated effectively by controlling the immersion depth below 100 mm and tin-plating time at 3 s. The thickness of tin-coating increased from not more than 5 μm to 12.3 μm with the proposed vertical tin-plating process. Meanwhile, the thickness of the intermetallic compounds (IMCs) layer between the tin-coating and copper wires was reduced from 3.26 μm to 0.62 μm if the immersion time decreased from 30 s to 1 s. Besides, a self-developed flux, which possesses a boiling point or decomposed temperature of active components over 300℃, exhibits a better efficiency in reducing the pinhole formation.

Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor

The waveguide to coaxial cable adapter is very important to the cavity beam position monitor （CBPM） because it determines how much of the energy in the cavity could be coupled outside. In this paper, the waveguide to coaxial cable adapter of a CBPM is designed and experiments are conducted. The curve shapes of experiments and simulations are very similar and the difference in reflection is less than 0.1. This progress provides a reliable method for designing the adapter.

Error Estimates for 1D Asymptotic Models in Coaxial Cables with Non-Homogeneous Cross-Section

This paper is the first contribution towards the rigorous justification of asymptotic 1D models for the time-domain simulation of the propagation of electromagnetic waves in coaxial cables.Our general objective is to derive error estimates between the"exact"solution of the full 3D model and the"approximate"solution of the 1D model known as the Telegraphist’s equation.

A Survey on Channel Measurements and Models for Underground MIMO Communication Systems

The high reliability of the communication system is critical in metro and mining applications for personal safety,channel optimization,and improving operational performance.This paper surveys the progress of wireless communication systems in underground environments such as tunnels and mines from 1920 to 2022,including the evolution of primitive technology,advancements in channel modelling,and realization of various wireless propagation channels.In addition,the existing and advanced channel modeling strategies,which include the evolution of different technologies and their applications;mathematical,analytical,and experimental techniques for radio propagation;and significance of the radiation characteristics,antenna placement,and physical environment of multiple-input multiple-output(MIMO)communication systems,are analyzed.The given study introduces leaky coaxial cable(LCX)and distributed antenna system(DAS)designs for improving narrowband and wideband channel capacity.The paper concludes by figuring out open research areas for the future technologies.

VIDEO TRANSMISSION SYSTEM IN ITV APPLICATION

The transmission characteristics of video transmission mediums,coaxial ca ble and optical fiber,are discussed in the paper. The formulas for frequency bandwidth are given to evaluate the video transmission distance. For typical video transmission systems with BB/IM and PFM/IM tising optical fiber as the channel, expressions and calculating results for both S/N and sensitivity are given. Finally, the principle for se lecting different type of transmission systems according to transmission distances of the industrial TV is presented.

A novel smart steel strand based on optical-electrical co-sensing for full-process and full-scale monitoring of prestressing concrete structures

As the main load bearing component,the steel strand has a significant impact on the safety of civil infrastructure.Real-time monitoring of steel strand stress distribution throughout the damage process is an impor-tant aspect of civil infrastructure health assessment.Hence,this study proposes an optical-electrical co-sensing(OECS)smart steel strand with the DOFS and CCFPI embedded in.It can simultaneously measure small strains in the initial damage phase with high accuracy and obtain information in the large deformation phase with relatively low precision.Several experiments were carried out to test its sensing performance.It shows both DOFS and CCFPI have good linearity,repeatability and hysteresis.In comparison to DOFS,CCFPI has a relatively lower accuracy and resolution,but a large enough measurement range to tolerate the large strain in the event of a steel strand failure.To verify the reliability of the proposed smart steel strand in real structures,the strand strain distribution in the full damage process of bonded prestressed beams under four-point bending loading was monitored using the smart steel strand as a prestressing tendon.The strain measured by the OECS steel strand is shown to reflect the deformation and stiffness variation of prestressed beams under different load.

Simulation and experiments for the Q_ext of a cavity beam position monitor

The external Q （Qext） of the dipole mode is a key parameter of the Cavity Beam Position Monitor （CBPM）. It determines the amplitude and length of the dipole mode signal. In this paper, Qext of a CBPM whose waveguides were open to the air was simulated and measured, and the results agreed with each other. Then four waveguide-to-coaxial cable adpaters were adjusted and assembled to the CBPM, and Qext remained unchanged. This progress provides a reliable method to evaluate Qext in the physics design without simulating the structurally complex adapters.