Controllable active sites and facile synthesis of cobalt nanoparticle embedded in nitrogen and sulfur co-doped carbon nanotubes as efficient bifunctional electrocatalysts for oxygen reduction and evolution reactions

Development of efficient and promising bifunctional electrocatalysts for oxygen reduction and evolutionreactions is desirable. Herein, cobalt nanoparticles embedded in nitrogen and sulfur co-doped carbonnanotubes(Co@NSCNT) were prepared by a facile pyrolytic treatment. The cobalt nanoparticles and co-doping of nitrogen and sulfur can improve the electron donor-acceptor characteristics of the carbon nan-otubes and provide more active sites for catalytic oxygen reduction and evolution reactions. The preparedCo@NSCNT, annealed at 900℃, showed excellent electrocatalytic performance and better durability thancommercial platinum catalysts. Additionally, Co@NSCNT-900 catalysts exhibited comparable onset poten-tials and Tafel slopes to ruthenium oxide. Overall, Co@NSCNT showed high activity and improved dura-bility for both oxygen evolution and reduction reactions.

Visible light induced photodegradation of organic pollutants on nitrogen and fluorine co-doped TiO_2 photocatalyst

The nitrogen and fluorine co doped TiO 2 polycrystalline powder was synthesized by calcinations of the hydrolysis product of tetra butyl titanate with ammonium fluoride. Nitrogen and fluorine co doping causes the absorption edge of TiO 2 to shift to a lower energy region. The photocatalytic activity of co doped TiO 2 with anatase phases was found to be 2 4 times higher than that of the commercial TiO 2 photocatalyst Degussa P25 for phenol decomposition under visible light irradiation. The co doped TiO 2 powders only contain anatase phases even at 1000℃. Apparently, ammonium fluoride added retarded phase transformation of the TiO 2 powders from anatase to rutile. The substitutional fluorine and interstitial nitrogen atoms in co doped TiO 2 polycrystalline powder were responsible for the vis light response and caused the absorption edge of TiO 2 to shift to a lower energy region.

Preparation of nitrogen and sulfur co-doped ultrathin graphitic carbon via annealing bagasse lignin as potential electrocatalyst towards oxygen reduction reaction in alkaline and acid media

Renewable lignin used for synthesizing materials has been proven to be highly potential in specific electrochemistry.Here,we report a simple method to synthesize nitrogen and sulfur co-doped carbon nanosheets by using bagasse lignin,denoted as lignin-derived carbon(LC).By adjusting the ratio of nitrogen source and annealing temperature,we obtained the ultrathin graphitic lignin carbon(LC-4-1000)with abundant wrinkles with high surface area of 1208 m2g_1 and large pore volume of 1.40 cm3g_1.In alkaline medium,LC-4-1000 has more positive half-wave potential and nearly current density compared to commercial Pt/C for oxygen reduction reaction(ORR).More importantly,LC-4-1000 also exhibits comparable activity and superior stability for ORR in acid medium due to its high graphitic N ratio and a direct four electron pathway for ORR.This study develops a cost-effective and highly efficient method to prepare biocarbon catalyst for ORR in fuel cells.

Nitrogen and Sulfur Co-doped Porous Carbon Derived from ZIF-8 as Oxygen Reduction Reaction Catalyst for Microbial Fuel Cells

Nitrogen and sulfur co-doped porous nanocarbon (ZIF-C-N-S) catalyst was successfully synthesized derived from ZIF-8 and thiourea precursors.The electrochemical measurements indicate that the as-obtained ZIF-C-N-S catalyst exhibits higher electrocatalytic activity for oxygen reduction reaction (ORR) in alkaline electrolyte and superior durability-longer than commercial Pt/C catalyst.The enhancment of electrocatalytic activity mainly be come from the open pore structure,large specific surface area as well as the synergistic effect resulted from the co-doping of N and S atoms.In addition,the ZIF-C-N-S catalyst is also used as the air cathode catalyst in the microbial fuel cell (MFC) device.The maximum power density and stable output voltage of ZIF-C-N-S based MFC are 1315 mW/m2 and 0.48 V,respectively,which is better than that of Pt/C based MFC.

Photocatalytic Destruction of Nitrogen Monoxide over La^(3+) and N Co-doped SrTiO_3 Powders under Visible Light Irradiation

Lanthanum and nitrogen co-doped SrTiO_3 was prepared by a mechanochemical reaction using SrTiO_3, urea and La_2O_3 as the raw materials. The samples were characterized by X-ray diffraction, X-ray photoelectron spectrometer, transmission electron microscopy, and nitrogen adsorption-desorption isotherm measurements. Lanthanum doping could increase the doping content of nitrogen in the sample. The sample prepared with 0.2 mol% La_2O_3, 22 mol% urea and 77.8 mol% SrTiO_3 by mechanochemical reaction, which has nearly the same nitrogen and lanthanum doping fractions, exhibited high photocatalytic activities. Under the irradiation of light with wavelength larger than 400, and 290 nm, the photocatalytic activity of nitrogen and lanthanum co-doped SrTiO_3 were 2.6 and 2 times greater than that of pure SrTiO_3.

Nitrogen-doped cobalt nanoparticles/nitrogen-doped plate-like ordered mesoporous carbons composites as noble-metal free electrocatalysts for oxygen reduction reaction

In this work, nitrogen-doped cobalt nanoparticlesinitrogen-doped plate-like ordered mesoporous carbons (N/Co/OMCs) were used as noble-metal free electrocatalysts with high catalytic efficiency. Compared with OMCs with long channel length, due to more entrances for catalytic target accessibility and a short pathway for rapid diffusion, the utilization efficiency of cobalt nanoparticles inside the plate-like OMCs with short pore length is well improved, which can take full advantage of porous structure in electrocatalysis and increase the utilization of catalysts. The active sites in N/Co/OMCs for oxygen reduction reaction (ORR) are highly exposed to oxygen molecule, which results in a high activity for ORR. By combination of the catalytic properties of nitrogen dopant, incorporation of Co nanoparticles, and structural properties of OMCs, the N/Co/plate-like OMCs are highly active noble-metal free catalysts for ORR in alkaline solution. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Enhancing anchoring and catalytic conversion of polysulfides by nitrogen deficient cobalt nitride for advanced lithium-sulfur batteries

While lithium-sulfur(Li-S)battery has attracted remarkable attention owing to the high theoretical capacity,its practical application is still hindered by the shuttle and sluggish conversion kinetics of intermediate lithium polysulfides(Li PSs).Defect engineering,which can regulate the electronic structure and in turn influence the surface adsorption and catalytic capability,has been regarded as a feasible strategy to deal with the above challenges.However,few studies on nitrogen vacancies and their mechanisms are reported.Herein,cobalt nitride with nitrogen vacancies grown on multi-walled carbon nanotube(CNTCo N-VN)is designed and applied as the separator modification material to investigate the enhancing mechanism of nitrogen vacancies on Li-S batteries.The experimental evidence and theoretical calculation indicate that the introduction of nitrogen vacancies into cobalt nitride can enhance the chemical affinity to Li PSs and effectively hamper the shuttle effect.Meanwhile the reduced band gap of the d-band center of Co and p-band center of N for CNT-Co N-VNand the promoted diffusion of Li^(+) can expedite the solid-liquid and liquid-liquid conversions of sulfur species.Due to these superiorities,the cell with CNT-Co NVNmodified separator delivers a favorable initial capacity of 901 m Ah g^(-1)and a capacity of 660 m Ah g^(-1)can be achieved after 250 cycles at 2 C.This work explores the application of metal nitride with nitrogen vacancies and sheds light on the development of functional separators for high-efficient Li-S batteries.

Hollow cobalt oxide nanoparticles embedded in nitrogen-doped carbon nanosheets as an efficient bifunctional catalyst for Zn–air battery

Rational design of low-cost, highly electrocatalytic activity, and stable bifunctional electrocatalysts for oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) has been a great significant for metal–air batteries. Herein, an efficient bifunctional electrocatalyst based on hollow cobalt oxide nanoparticles embedded in nitrogen-doped carbon nanosheets(Co/N-Pg) is fabricated for Zn–air batteries. A lowcost biomass peach gum, consisting of carbon, oxygen, and hydrogen without other heteroatoms, was used as carbon source to form carbon matrix hosting hollow cobalt oxide nanoparticles. Meanwhile, the melamine was applied as nitrogen source and template precursor, which can convert to carbon-based template graphitic carbon nitride by polycondensation process. Owing to the unique structure and synergistic effect between hollow cobalt oxide nanoparticles and Co-N-C species, the proposal Co/N-Pg catalyst displays not only prominent bifunctional electrocatalytic activities for ORR and OER, but also excellent durability. Remarkably, the assembled Zn–air battery with Co/N-Pg air electrode exhibited a low discharge-charge voltage gap(0.81 V at 50 mA cm^-2) and high peak power density(119 mW cm^-2) with long-term cycling stability. This work presents an effective approach for engineering transition metal oxides and nitrogen modified carbon nanosheets to boost the performance of bifunctional electrocatalysts for Zn–air battery.

Nitrogen-doped carbon nanotube encapsulating cobalt nanoparticles towards efficient oxygen reduction for zinc–air battery

Nitrogen-doped carbon materials encapsulating 3 d transition metals are promising alternatives to replace noble metal Pt catalysts for efficiently catalyzing the oxygen reduction reaction(ORR). Herein, we use cobalt substituted perfluorosulfonic acid/polytetrafluoroethylene copolymer and dicyandiamide as the pyrolysis precursor to synthesize nitrogen-doped carbon nanotube(N–CNT) encapsulating cobalt nanoparticles hybrid material. The carbon layers and specific surface area of N–CNT have a critical role to the ORR performance due to the exposed active sites, determined by the mass ratio of the two precursors. The optimum hybrid material exhibits high ORR activity and stability, as well as excellent performance and durability in zinc–air battery.

Stabilising Cobalt Sulphide Nanocapsules with Nitrogen-Doped Carbon for High-Performance Sodium-Ion Storage

Conversion-type anode materials with a high charge storage capability generally su er from large volume expansion, poor electron conductivity, and sluggish metal ion transport kinetics. The electrode material described in this paper, namely cobalt sulphide nanoparticles encapsulated in carbon cages(Co9S8@NC), can circumvent these problems. This electrode material exhibited a reversible sodium-ion storage capacity of 705 mAh g^-1 at 100 mA g^-1 with an extraordinary rate capability and good cycling stability. Mechanistic study using the in situ transmission electron microscope technique revealed that the volumetric expansion of the Co9S8 nanoparticles is bu ered by the carbon cages, enabling a stable electrode–electrolyte interface. In addition, the carbon shell with high-content doped nitrogen significantly enhances the electron conductivity of the Co9S8@NC electrode material and provides doping-induced active sites to accommodate sodium ions. By integrating the Co9S8@NC as negative electrode with a cellulose-derived porous hard carbon/graphene oxide composite as positive electrode and 1 M NaPF6 in diglyme as the electrolyte, the sodium-ion capacitor full cell can achieve energy densities of 101.4 and 45.8 Wh kg^-1 at power densities of 200 and 10,000 W kg^-1, respectively.

Cobalt nanoparticles encapsulated in nitrogen-doped carbon for room-temperature selective hydrogenation of nitroarenes

Here,we report cobalt nanoparticles encapsulated in nitrogen‐doped carbon(Co@NC)that exhibit excellent catalytic activity and chemoselectivity for room‐temperature hydrogenation of nitroarenes.Co@NC was synthesized by pyrolyzing a mixture of a cobalt salt,an inexpensive organic molecule,and carbon nitride.Using the Co@NC catalyst,a turnover frequency of^12.3 h?1 and selectivity for 4‐aminophenol of>99.9%were achieved for hydrogenation of 4‐nitrophenol at room temperature and 10 bar H2 pressure.The excellent catalytic performance can be attributed to the cooperative effect of hydrogen activation by electron‐deficient Co nanoparticles and energetically preferred adsorption of the nitro group of nitroarenes to electron‐rich N‐doped carbon.In addition,there is electron transfer from the Co nanoparticles to N‐doped carbon,which further enhances the functionality of the metal center and carbon support.The catalyst also exhibits stable recycling performance and high activity for nitroaromatics with various substituents.

Electrocatalytic water splitting at nitrogen-doped carbon layers-encapsulated nickel cobalt selenide

Generally,the catalytic overpotentials of hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)are unavoidable because of the low charge transfer.In this work,two strategies of alloying of Co with Ni and enclosing of electrocatalysts with carbonaceous materials were both used to accelerate the catalytic efficiency of cobalt selenide for water splitting.The nitrogen-doped carbon(NC)layer improves the reaction kinetics by efficient charge transfer.The alloying of metal into composited electrocatalysts can modify the electronic properties of host materials,thereby tuning the adsorption behavior of intermediate and improving the electrocatalytic activity.As expected,Nyquist plots reveal that the charge-transfer resistance(Rct)of nickel cobalt selenide encapsulated into nitrogen-doped carbon layer(CoNiSe/NC-3,Co:Ni=1:1)are just 5 and 9 for HER and OER,respectively,which are much lower than those of CoSe/NC-1(Co:Ni=1:0)(81 and 138)and CoNiSe/NC-3 without NC(CoNiSe-3)(54 and 25).With the high charge transfer and porous structure,CoNiSe/NC-3 shows good performance for both HER and OER.When current density reaches 10 m A cm-2,only 100 and 270 mV overpotentials are required for HER and OER,respectively.With the potential of 1.65 V,full water splitting also can be catalyzed by Co Ni Se/NC-3 with current density of 20 m A cm-2,suggesting that CoNiSe/NC-3 could be used as replacement for noble metal electrocatalysts.

Dimerization of Propylene by Nickel (Ⅱ) and Cobalt (Ⅱ) Catalysts Based on Bidentate Nitrogen-phosphino Chelating Ligands

The catalytic property of propylene dimerization by several nickel (Ⅱ), cobalt (Ⅱ) complexes containing N-P bidentate ligands was studied in combination with organoaluminum co-catalysts. The effects of the type of aluminum co-catalysts and its relative amount, the nature of precursors in terms of ligand backbone and metal center were investigated. The results indicated that precursor I (N,N-dimethyl-2-(diphenylphosphino)aniline nickel (Ⅱ) dichloride) exhibited high activity in propylene dimerization in the presence of the strong Lewis acid Et3Al2Cl3, whereas low productivity by its cobalt analogues was observed under identical reaction conditions.

Convenient room-temperature synthesis of sulfur and nitrogen co-doped NiCo-LDH coupled with CNTs on NiCo foam as battery-type electrode for high performance hybrid supercapacitor

The convenient synthesis of the composite electrode with high supercapacitance performance plays an important role in practical application but is challenging.Herein,the carbon nanotubes(CNTs)coupled with lowcrystalline sulfur and nitrogen co-doped Ni Co-LDH(denoted as SN-Ni Co-LDH)nanosheets array are grown on Ni Co foam(NCF)substrate by two convenient steps of metal induced self-assembly and corrosion engineering,which present the advantages of operating at roomtemperature and low preparation costs.Benefiting from the S–N co-doping and low-crystallinity of Ni Co-LDH,the prepared SN-Ni Co-LDH@CNTs@NCF electrode presents a topping charge capacity of 2470 C·g^(-1)(4.94 C·cm^(-2))at 5 m A·cm^(-2).Furthermore,the fabricated asymmetry supercapacitor(ASC)achieves an extraordinary energy density of 77 Wh·kg^(-1)(0.617 m Wh·cm^(-2))at a power density of 438 W·kg^(-1)(3.5 m W·cm^(-2))and outstanding stability(91%capacity retention after 5000 cycles at20 m A·cm^(-2)).Impressively,the structure evolution of Ni Co-LDH during the charge/discharge processes has been thoroughly elucidated by in-situ Raman spectra.Therefore,this work verifies a powerful strategy and practical value for preparing composite electrodes with high supercapacitance performance,and also provides guidance for the rational design of the smart electrodes.

Enhanced photocatalytic hydrogen production from Co-MOF/CN by nitrogen and sulfur co-doped coal-based carbon quantum dots

A novel composite photocatalyst for photocatalytic decomposition of water for hydrogen evolution was successfully synthesized by in-situ growth of nitrogen and sulfur co-doped coal-based carbon quantum dots(NSCQDs)nanoparticles on the surface of sheet cobalt-based metal-organic framework(Co-MOF)and graphitic carbon nitride(g-C_(3)N_(4),CN).The structure and properties of the obtained catalysts were systematically analyzed.NSCQDs effectively broaden the absorption of Co-MOF and CN in the visible region.The new composite photocatalyst has high hydrogen production activity and the hydrogen production rate reaches 6254μmol/(g·h)at pH=9.At the same time,NSCQDs synergy Co-MOF/CN composites have good stability.After four cycles of hydrogen production,the performance remains relatively stable.The tran sient photocurrent response and Nyquist plot experimental results further demonstrate the improvement of carrier separation efficiency in composite catalysts.The semiconductor type(n-type semico nductor)of the single-phase catalyst was determined by the Mott-Schottky test,and the band structure was analyzed.The conductive and valence bands of CN are-0.99 and 1.72 eV,respectively,and the conduction and valence bands of Co-MOF are-1.85 and 1.33 eV,respectively.Th e mechanism of the photocatalytic reaction can be inferred,that is,Z-type heterojunction is formed between CN an d Co-MOF,and NSCQDs was used as cocatalyst.

Cobalt Sulfide Confined in N-Doped Porous Branched Carbon Nanotubes for Lithium-Ion Batteries

Lithium-ion batteries(LIBs) are considered new generation of large-scale energy-storage devices.However,LIBs suffer from a lack of desirable anode materials with excellent specific capacity and cycling stability.In this work,we design a novel hierarchical structure constructed by encapsulating cobalt sulfide nanowires within nitrogen-doped porous branched carbon nanotubes(NBNTs)for LIBs.The unique hierarchical Co9S8@NBNT electrode displayed a reversible specific capacity of 1310 mAhg-1 at a current density of 0.1 Ag-1,and was able to maintain a stable reversible discharge capacity of 1109 mAhg-1 at a current density of 0.5 Ag-1 with coulombic efficiency reaching almost 100% for 200 cycles.The excellent rate and cycling capabilities can be ascribed to the hierarchical porosity of the one-dimensional Co9S8@NBNT internetworks,the incorporation of nitrogen doping,and the carbon nanotube confinement of the active cobalt sulfide nanowires offering a proximate electron pathway for the isolated nanoparticles and shielding of the cobalt sulfide nanowires from pulverization over long cycling periods.

Promotion of activation ability of N vacancies to N2 molecules on sulfur-doped graphitic carbon nitride with outstanding photocatalytic nitrogen fixation ability

Nitrogen vacancies and sulfur co-doped g-C3N4 with outstanding N2 photofixation ability was synthesized via dielectric barrier discharge plasma treatment. X-ray diffraction, ultraviolet–visible spectroscopy, N2 adsorption, scanning electron microscopy, X-ray photoelectron spectroscopy, photoluminescence spectroscopy, and temperature-programmed desorption were used to characterize the as-prepared catalyst. The results showed that plasma treatment cannot change the morphology of the as-prepared catalyst but introduces nitrogen vacancies and sulfur into g-C3N4 lattice simultaneously. The as-prepared co-doped g-C3N4 displays an ammonium ion production rate as high as 6.2 mg·L^-1·h^-1·gcat^-1, which is 2.3 and 25.8 times higher than that of individual N-vacancy-doped g-C3N4 and neat g-C3N4, respectively, as well as showing good catalytic stability. Experimental and density functional theory calculation results indicate that, compared with individual N vacancy doping, the introduction of sulfur can promote the activation ability of N vacancies to N2 molecules, leading to promoted N2 photofixation performance.

Cobalt and nitrogen atoms co-doped porous carbon for advanced electrical double-layer capacitors

Electrical double-layer capacitors are widely concerned for their high power density,long cycling life and high cycling efficiency.However,their wide application is limited by their low energy density.In this study,we propose a simple yet environmental friendly method to synthesize cobalt and nitrogen atoms co-doped porous carbon(CoAT-NC) material.Cobalt atoms connected with primarily pyridinic nitrogen atoms can be uniformly dispersed in the amorphous carbon matrix,which is benefit for improving electrical conductivity and density of states of the carbon material.Therefore,an enhanced perfo rmance is expected when CoAT-NC is served as electrode in a supercapacitor device.CoAT-NC displays a good gravimetric capacitance of 160 F/g at 0.5 A/g combing with outstanding capacitance retention of 90% at an extremely high current density of 100 A/g in acid electrolyte.Furthermore,a good energy density of 30 Wh/kg can be obtained in the organic electrolyte.

Sulfur–nitrogen co-doped graphene supported cobalt–nickel sulfide rGO@SN-CoNi_(2)S_(4) as highly efficient bifunctional catalysts for hydrogen/oxygen evolution reactions

Designing highly active and stable electrocata-lysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is a challenge for energy con-version and storage technology.In this work,a S and N co-doped graphene supported cobalt–nickel sulfide composite catalyst(rGO@SN-CoNi_(2)S_(4))was synthesized simply via a one-step hydrothermal method.The as-synthesized CoNi_(2)S_(4)particles grew in a mosaic manner inside GO lamellae and were encapsulated with graphene.As a bifunctional catalyst,the r GO@SN-CoNi_(2)S_(4)exhibits excellent electrocatalytic performance under alkaline con-ditions,which only required the overpotential of 142.6 mV(vs.RHE)and 310 m V(vs.RHE)to deliver a current density of 10 mA·cm^(-2) for HER and OER,respectively.The good hydrophilicity of the r GO@SN,the pure phase of bimetallic structure,and the chemical coupling/interaction between the CoNi_(2)S_(4)and the rGO@SN are attributable to be the possible reasons responsible for the higher HER and OER catalytic activities.Additionally,the rGO@SN-CoNi_(2)S_(4)also shows a great potential for serving as an excellent cathode and anode electrolyzer during the water splitting process.