Magnetic fields parallel to the electrodes were introduced during a pulse plating process to obtain cobalt thin films from alkaline baths. Ef-fects of different magnetic intensities on the composition, microstructure,...Magnetic fields parallel to the electrodes were introduced during a pulse plating process to obtain cobalt thin films from alkaline baths. Ef-fects of different magnetic intensities on the composition, microstructure, and magnetic properties of cobalt thin films were investigated. It was found that the deposition speed increased gradually with the increase of magnetic intensity. Almost all of the deposited films were crys-talline and showed Co(002), Co(100) peaks. With the rise on the magnetic intensity, the intensity of Co (002) peak raised gradually. Mag-netic fields would induce cobalt growing along (002) orientation. The films were densely covered with typical nodular structure. Films of smaller grain size and smooth surface could be formed under high magnetic intensity (1 T) as a result of magnetic force and MHD effects. Moreover, higher magnetic intensity induced larger saturation magnetization and lower coercivity. With the rise on magnetic intensity, cobalt contents in the films increased gradually, which led to the rise of saturation magnetization.展开更多
Pure cobalt(Co)thin films were fabricated by direct current magnetron sputtering,and the effects of sputtering power and pres-sure on the microstructure and electromagnetic properties of the films were investigated.As...Pure cobalt(Co)thin films were fabricated by direct current magnetron sputtering,and the effects of sputtering power and pres-sure on the microstructure and electromagnetic properties of the films were investigated.As the sputtering power increases from 15 to 60 W,the Co thin films transition from an amorphous to a polycrystalline state,accompanied by an increase in the intercrystal pore width.Simultaneously,the resistivity decreases from 276 to 99μΩ·cm,coercivity increases from 162 to 293 Oe,and in-plane magnetic aniso-tropy disappears.As the sputtering pressure decreases from 1.6 to 0.2 Pa,grain size significantly increases,resistivity significantly de-creases,and the coercivity significantly increases(from 67 to 280 Oe),which can be attributed to the increase in defect width.Corres-pondingly,a quantitative model for the coercivity of Co thin films was formulated.The polycrystalline films sputtered under pressures of 0.2 and 0.4 Pa exhibit significant in-plane magnetic anisotropy,which is primarily attributable to increased microstress.展开更多
A cobalt-iron alloy thin-film electrode-based electrochemical hydrogen-phosphate-ion sensor was prepared by electrodepositing on an Au-coated Al2O3 substrate from an aqueous solution of metal-salts. The use of a cobal...A cobalt-iron alloy thin-film electrode-based electrochemical hydrogen-phosphate-ion sensor was prepared by electrodepositing on an Au-coated Al2O3 substrate from an aqueous solution of metal-salts. The use of a cobalt-iron alloy electrode greatly improved the hydrogen-ion sensor response performance, i.e., the sensor worked stably for more than 7 weeks and showed a quick response time of several seconds. Among the cobalt and iron alloy systems tested, the electrodeposited Co58Fe42 thin-film electrode showed the best EMF response characteristics, i.e., the sensor exhibited a linear potentiometric response to hydrogen-phosphate ion at the concentration range between 1.0 × 10–5 and 1.0 × 10–2 M with the slope of –43 mV/decade at pH 5.0 and at 30℃. A sensing mechanism of the Co-based potentiometric hydrogen-phosphate ion sensor was proposed on the basis of results of instrumental analysis.展开更多
Cobalt isopropyl xanthate thin films （CXTFs） were deposited via chemical bath deposition onto different substrates：commercial glass （CG）, indium tin oxide （ITO）, and poly（methyl methacrylate） （PMM）. Isoprop...Cobalt isopropyl xanthate thin films （CXTFs） were deposited via chemical bath deposition onto different substrates：commercial glass （CG）, indium tin oxide （ITO）, and poly（methyl methacrylate） （PMM）. Isopropyl xanthate was synthesized according to a method described in the literature. The cobalt nitrate and isopropyl xanthate were mixed in a beaker, which allowed the thin films to be deposited via a simple ion-ion mechanism. The transmission, reflectivity, refractive index, dielectric constant, and optical conductivity were investigated for various thin films coated onto different substrates. An ultraviolet-visible spectrophotometer was used to measure the optical properties of the thin films. The lowest value of the transmission and the highest value of the refractive index were observed for the thin films deposited onto PMM. The structure of the cobalt xanthate was characterized by Fourier transform infrared （FTIR） spectroscopy, which was measured using a Perkin-Elmer Spectrum 400 spectrometer. The stretching vibration of the Co-S bonds was observed at 359 cm^-1 in the FTIR spectrum of the CXTFs.展开更多
氟化钴具有良好的库伦效率、理论比容量、循环稳定性以及容量保持能力,表现出较好的电化学性能,在化学储能领域引起了研究人员的关注。以六水氯化钴为钴源、氟化铵为氟源,采用一步溶剂热法在活性碳布表面负载氟化钴晶体纳米片阵列,用TEM...氟化钴具有良好的库伦效率、理论比容量、循环稳定性以及容量保持能力,表现出较好的电化学性能,在化学储能领域引起了研究人员的关注。以六水氯化钴为钴源、氟化铵为氟源,采用一步溶剂热法在活性碳布表面负载氟化钴晶体纳米片阵列,用TEM、SEM和XRD考察了氟化钴的微观形貌结构和物相组成,利用电化学工作站得到了氟化钴的电化学循环稳定、比电容等性能。结果表明:该纳米片厚10~30 nm,垂直生长在碳布纤维表面呈交错网络状分布;在1 m A/cm^(2)的电流密度下,复合电极的比电容为826.6 F/g,循环充放电1000次后,比容量保持率为93.7%。本研究为氟化物基复合材料的短路径合成提供了一种可行方案,在碳布表面阵列式生长氟化物晶体,构筑全电化学活性的无粘结剂型复合电极,为优化氟化物的电化学性能提供了一种新的研究思路。展开更多
The amorphous TbCo/Cr films with perpendicular magneto-anisotropy were prepared by nonbiased r.f magnetron sputtering and the effects of Cr underlayer on the magnetic properties of TbCo films were investigated. It is ...The amorphous TbCo/Cr films with perpendicular magneto-anisotropy were prepared by nonbiased r.f magnetron sputtering and the effects of Cr underlayer on the magnetic properties of TbCo films were investigated. It is found that both the TbCo layer thickness and the Cr underlayer can influence the magnitude of anisotropy for TbCo films. A perpendicular anisotropy as high as 4.57×10~6 erg·cm^(-3) was obtained in 120 nm thick Tb_(31)C_(69) films with a 180 nm thick Cr underlayer. But it is only 3.24×10~6 erg·cm^(-3) for the Tb_(31)Co_(69) film without Cr underlayer of the same thickness. The cross-sectional SEM observations indicate that the TbCo films with Cr underlayer consist of columns structure. It is considered that this heterogeneous structure gives rise to the anisotropy enhancement of TbCo films in case with Cr underlayer.展开更多
A voltammetric sensor based on the electropolymerization of cobalt-poly(methionine)(Co-poly(Met)) on a glassy carbon electrode (GCE) was developed and applied for the determination of estriol by differential pulse vol...A voltammetric sensor based on the electropolymerization of cobalt-poly(methionine)(Co-poly(Met)) on a glassy carbon electrode (GCE) was developed and applied for the determination of estriol by differential pulse voltammetry (DPV) for the first time. The electrochemical properties of the Co-poly(Met)/GCE were analysed by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to characterize the polymers on the GCE surface. The deposition of the Co-poly(Met) film on the GCE surface enhanced the sensor electronic transfer. CV studies revealed that estriol exhibits an irreversible oxidation peak at t0.58 V for the Co-poly(Met)/GCE (vs. Ag/AgCl reference electrode) in 0.10 mol/L Britton-Robinson buffer solution (pH=7.0). Different voltammetric scan rates (10-200 mV/s) suggested that the estriol oxidation on the Co-poly(Met)/GCE surface is controlled by adsorption and diffusion processes. Based on the optimized DPV conditions, the linear responses for estriol quantification were from 0.596 μmol/L to 4.76 μmol/L (R2 =0.996) and from 5.66 μmol/L to 9.90 μmol/L (R2 =0.994) with a limit of detection (LOD) of 0.0340 μmol/L and a limit of quantification (LOQ) of 0.113 μmol/L. The DPV-Co-poly(Met)/GCE method provided good intra-day and inter-day repeatability with RSD values lower than 5%. Also, no interference of real sample matrices was observed on the estriol voltammetric response, making the DPV-Copoly( Met)/GCE highly selective for estriol. The accuracy test showed that the estriol recovery was in the ranges 96.7%-103% and 98.7%-102% for pharmaceutical tablets and human urine, respectively. The estriol quantification in pharmaceutical tablets performed by the Co-poly(Met)/GCE-assisted DPV method was comparable to the official analytical protocols.展开更多
We present a systematic investigation of magnetic anisotropy induced by oblique deposition of Co thin films on MgO（001） substrates by molecular beam epitaxy at different deposition angles,i.e.,0？,30？,45？,60？,and...We present a systematic investigation of magnetic anisotropy induced by oblique deposition of Co thin films on MgO（001） substrates by molecular beam epitaxy at different deposition angles,i.e.,0？,30？,45？,60？,and 75？with respect to the surface normal.Low energy electron diffraction（LEED）,surface magneto–optical Kerr effect（SMOKE）,and anisotropic magnetoresistance（AMR） setups were employed to investigate the magnetic properties of cobalt films.The values of in-plane uniaxial magnetic anisotropy（UMA） constant Ku and four-fold magnetocrystalline anisotropy constant K1 were derived from magnetic torque curves on the base of AMR results.It was found that the value of Ku increases with increasing deposition angle with respect to the surface normal,while the value of K_1 remains almost constant for all the samples.Furthermore,by using MOKE results,the Ku values of the films deposited obliquely were also derived from the magnetization curves along hard axis.The results of AMR method were then compared with that of hard axis fitting method（coherent rotation） and found that both methods have almost identical values of UMA constant for each sample.展开更多
基金financially supported by the Natural Science Foundation of Zhejiang Province (No. Y4110290)National Natural Science Foundation of China (Nos. 20971116& 21171155)National Scientific Cooperation Project(No. 2011FA52400)
文摘Magnetic fields parallel to the electrodes were introduced during a pulse plating process to obtain cobalt thin films from alkaline baths. Ef-fects of different magnetic intensities on the composition, microstructure, and magnetic properties of cobalt thin films were investigated. It was found that the deposition speed increased gradually with the increase of magnetic intensity. Almost all of the deposited films were crys-talline and showed Co(002), Co(100) peaks. With the rise on the magnetic intensity, the intensity of Co (002) peak raised gradually. Mag-netic fields would induce cobalt growing along (002) orientation. The films were densely covered with typical nodular structure. Films of smaller grain size and smooth surface could be formed under high magnetic intensity (1 T) as a result of magnetic force and MHD effects. Moreover, higher magnetic intensity induced larger saturation magnetization and lower coercivity. With the rise on magnetic intensity, cobalt contents in the films increased gradually, which led to the rise of saturation magnetization.
基金the financial support from the National Key Research and Development Program of China(No.2017YFB0305500)the State Key Laboratory of Powder Metallurgy,Central South University,Changsha,China.
文摘Pure cobalt(Co)thin films were fabricated by direct current magnetron sputtering,and the effects of sputtering power and pres-sure on the microstructure and electromagnetic properties of the films were investigated.As the sputtering power increases from 15 to 60 W,the Co thin films transition from an amorphous to a polycrystalline state,accompanied by an increase in the intercrystal pore width.Simultaneously,the resistivity decreases from 276 to 99μΩ·cm,coercivity increases from 162 to 293 Oe,and in-plane magnetic aniso-tropy disappears.As the sputtering pressure decreases from 1.6 to 0.2 Pa,grain size significantly increases,resistivity significantly de-creases,and the coercivity significantly increases(from 67 to 280 Oe),which can be attributed to the increase in defect width.Corres-pondingly,a quantitative model for the coercivity of Co thin films was formulated.The polycrystalline films sputtered under pressures of 0.2 and 0.4 Pa exhibit significant in-plane magnetic anisotropy,which is primarily attributable to increased microstress.
文摘A cobalt-iron alloy thin-film electrode-based electrochemical hydrogen-phosphate-ion sensor was prepared by electrodepositing on an Au-coated Al2O3 substrate from an aqueous solution of metal-salts. The use of a cobalt-iron alloy electrode greatly improved the hydrogen-ion sensor response performance, i.e., the sensor worked stably for more than 7 weeks and showed a quick response time of several seconds. Among the cobalt and iron alloy systems tested, the electrodeposited Co58Fe42 thin-film electrode showed the best EMF response characteristics, i.e., the sensor exhibited a linear potentiometric response to hydrogen-phosphate ion at the concentration range between 1.0 × 10–5 and 1.0 × 10–2 M with the slope of –43 mV/decade at pH 5.0 and at 30℃. A sensing mechanism of the Co-based potentiometric hydrogen-phosphate ion sensor was proposed on the basis of results of instrumental analysis.
文摘Cobalt isopropyl xanthate thin films （CXTFs） were deposited via chemical bath deposition onto different substrates：commercial glass （CG）, indium tin oxide （ITO）, and poly（methyl methacrylate） （PMM）. Isopropyl xanthate was synthesized according to a method described in the literature. The cobalt nitrate and isopropyl xanthate were mixed in a beaker, which allowed the thin films to be deposited via a simple ion-ion mechanism. The transmission, reflectivity, refractive index, dielectric constant, and optical conductivity were investigated for various thin films coated onto different substrates. An ultraviolet-visible spectrophotometer was used to measure the optical properties of the thin films. The lowest value of the transmission and the highest value of the refractive index were observed for the thin films deposited onto PMM. The structure of the cobalt xanthate was characterized by Fourier transform infrared （FTIR） spectroscopy, which was measured using a Perkin-Elmer Spectrum 400 spectrometer. The stretching vibration of the Co-S bonds was observed at 359 cm^-1 in the FTIR spectrum of the CXTFs.
文摘氟化钴具有良好的库伦效率、理论比容量、循环稳定性以及容量保持能力,表现出较好的电化学性能,在化学储能领域引起了研究人员的关注。以六水氯化钴为钴源、氟化铵为氟源,采用一步溶剂热法在活性碳布表面负载氟化钴晶体纳米片阵列,用TEM、SEM和XRD考察了氟化钴的微观形貌结构和物相组成,利用电化学工作站得到了氟化钴的电化学循环稳定、比电容等性能。结果表明:该纳米片厚10~30 nm,垂直生长在碳布纤维表面呈交错网络状分布;在1 m A/cm^(2)的电流密度下,复合电极的比电容为826.6 F/g,循环充放电1000次后,比容量保持率为93.7%。本研究为氟化物基复合材料的短路径合成提供了一种可行方案,在碳布表面阵列式生长氟化物晶体,构筑全电化学活性的无粘结剂型复合电极,为优化氟化物的电化学性能提供了一种新的研究思路。
文摘The amorphous TbCo/Cr films with perpendicular magneto-anisotropy were prepared by nonbiased r.f magnetron sputtering and the effects of Cr underlayer on the magnetic properties of TbCo films were investigated. It is found that both the TbCo layer thickness and the Cr underlayer can influence the magnitude of anisotropy for TbCo films. A perpendicular anisotropy as high as 4.57×10~6 erg·cm^(-3) was obtained in 120 nm thick Tb_(31)C_(69) films with a 180 nm thick Cr underlayer. But it is only 3.24×10~6 erg·cm^(-3) for the Tb_(31)Co_(69) film without Cr underlayer of the same thickness. The cross-sectional SEM observations indicate that the TbCo films with Cr underlayer consist of columns structure. It is considered that this heterogeneous structure gives rise to the anisotropy enhancement of TbCo films in case with Cr underlayer.
基金CNPq (454438/2014-1)CAPES+1 种基金FINEPFAPEMIG for the financial support to this work
文摘A voltammetric sensor based on the electropolymerization of cobalt-poly(methionine)(Co-poly(Met)) on a glassy carbon electrode (GCE) was developed and applied for the determination of estriol by differential pulse voltammetry (DPV) for the first time. The electrochemical properties of the Co-poly(Met)/GCE were analysed by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to characterize the polymers on the GCE surface. The deposition of the Co-poly(Met) film on the GCE surface enhanced the sensor electronic transfer. CV studies revealed that estriol exhibits an irreversible oxidation peak at t0.58 V for the Co-poly(Met)/GCE (vs. Ag/AgCl reference electrode) in 0.10 mol/L Britton-Robinson buffer solution (pH=7.0). Different voltammetric scan rates (10-200 mV/s) suggested that the estriol oxidation on the Co-poly(Met)/GCE surface is controlled by adsorption and diffusion processes. Based on the optimized DPV conditions, the linear responses for estriol quantification were from 0.596 μmol/L to 4.76 μmol/L (R2 =0.996) and from 5.66 μmol/L to 9.90 μmol/L (R2 =0.994) with a limit of detection (LOD) of 0.0340 μmol/L and a limit of quantification (LOQ) of 0.113 μmol/L. The DPV-Co-poly(Met)/GCE method provided good intra-day and inter-day repeatability with RSD values lower than 5%. Also, no interference of real sample matrices was observed on the estriol voltammetric response, making the DPV-Copoly( Met)/GCE highly selective for estriol. The accuracy test showed that the estriol recovery was in the ranges 96.7%-103% and 98.7%-102% for pharmaceutical tablets and human urine, respectively. The estriol quantification in pharmaceutical tablets performed by the Co-poly(Met)/GCE-assisted DPV method was comparable to the official analytical protocols.
基金Project supported by the Chinese Academy of Sciences–The World Academy of Sciences(CAS–TWAS)Fellowship Programthe National Basic ResearcProgram of China(Grant Nos.2015CB921403 and 2012CB933102)the National Natural Science Foundation of China(Grant Nos.51427801,1137435and 11274361)
文摘We present a systematic investigation of magnetic anisotropy induced by oblique deposition of Co thin films on MgO（001） substrates by molecular beam epitaxy at different deposition angles,i.e.,0？,30？,45？,60？,and 75？with respect to the surface normal.Low energy electron diffraction（LEED）,surface magneto–optical Kerr effect（SMOKE）,and anisotropic magnetoresistance（AMR） setups were employed to investigate the magnetic properties of cobalt films.The values of in-plane uniaxial magnetic anisotropy（UMA） constant Ku and four-fold magnetocrystalline anisotropy constant K1 were derived from magnetic torque curves on the base of AMR results.It was found that the value of Ku increases with increasing deposition angle with respect to the surface normal,while the value of K_1 remains almost constant for all the samples.Furthermore,by using MOKE results,the Ku values of the films deposited obliquely were also derived from the magnetization curves along hard axis.The results of AMR method were then compared with that of hard axis fitting method（coherent rotation） and found that both methods have almost identical values of UMA constant for each sample.
