Boosting Fischer-Tropsch Synthesis via Tuning of N Dopants in TiO_(2)@CN-Supported Ru Catalysts

Nitrogen(N)-doped carbon materials as metal catalyst supports have attracted signifi cant attention,but the eff ect of N dopants on catalytic performance remains unclear,especially for complex reaction processes such as Fischer-Tropsch synthesis(FTS).Herein,we engineered ruthenium(Ru)FTS catalysts supported on N-doped carbon overlayers on TiO_(2)nanoparticles.By regulating the carbonization temperatures,we successfully controlled the types and contents of N dopants to identify their impacts on metal-support interactions(MSI).Our fi ndings revealed that N dopants establish a favorable surface environment for electron transfer from the support to the Ru species.Moreover,pyridinic N demonstrates the highest electron-donating ability,followed by pyrrolic N and graphitic N.In addition to realizing excellent catalytic stability,strengthening the interaction between Ru sites and N dopants increases the Ru^(0)/Ru^(δ+)ratios to enlarge the active site numbers and surface electron density of Ru species to enhance the strength of adsorbed CO.Consequently,it improves the catalyst’s overall performance,encompassing intrinsic and apparent activities,as well as its ability for carbon chain growth.Accordingly,the as-synthesized Ru/TiO_(2)@CN-700 catalyst with abundant pyridine N dopants exhibits a superhigh C_(5+)time yield of 219.4 mol CO/(mol Ru·h)and C_(5+)selectivity of 85.5%.

Fischer-Tropsch Synthesis over Alumina- Supported Cobalt-Based Catalysts: Effect of Support Variables

Different kinds of aluminum precursors were obtained from precipitating ammonium bicarbonate, ammonium carbonate, and saturated ammonium bicarbonate, then, boehmite (AlO(OH)), ammonium alumina carbonate hydroxide (AACH) and their mixture were obtained, and then, different kinds of alumina were obtained after calcination. Three catalysts supported on the different alumina were obtained via impregnating cobalt and ruthenium by incipient wetness. The effects of different precipitants on composition of precursors were?studied by XRD, FTIR, and TGA. The property and structure of alumina were studied by XRD and BET. The supported catalysts were studied by characterizations of XRD and H2-TPR, and the catalytic performance for Fischer-Tropsch synthesis (FTS) were evaluated at a fix-bed reactor. The relations among the composition of precursors, the property of alumina and the catalytic performance of supported catalysts were researched thoroughly.

Nanosized cobalt-based catalyst prepared by supercritical phase condition for Fischer-Tropsch synthesis

A series of nanosized Co/Zn/Mn/K composite catalysts for Fischer-Tropsch synthesis （FTS） were prepared by supercritical fluid drying （SCFD） method and common drying （CD） method. The nanosized cobalt-based catalysts were characterized by XRD, TEM and BET techniques. Their catalytic performances were tested in a slurry-bed reactor under FTS reaction conditions. The drying and crystallization were carried out simultaneously during SCFD, therefore, the catalysts prepared by SCFD method have ideal structure and show the FTS performance superior to the others prepared by CD method. The FTS activity and selectivity were improved via adding Zn, Mn and K promoters, and less CH4 and CO2 as well as higher yield of C5＋ products were achieved. The optimal performance of a 92% CO conversion and a 65% C5＋ product yield was obtained over a catalyst with the component of Co/Zn/Mn/K = 100/50/10/7. Furthermore, the catalytic performance was studied under the conditions of liquid-phase and supercritical phase slurry-bed, and C5＋ product yield were 57.4% and 65.4%, respectively. In summary, better catalytic performance was obtained using the nanosized catalyst prepared by SCFD method under supercritical reaction conditions, resulting in higher conversion of CO, less CO2 byproduct, and higher yield of C5＋ products.

Effects of zinc on Fe-based catalysts during the synthesis of light olefins from the Fischer-Tropsch process

Fe‐based catalysts for the production of light olefins via the Fischer‐Tropsch synthesis were modi‐fied by adding a Zn promoter using both microwave‐hydrothermal and impregnation methods. The physicochemical properties of the resulting catalysts were determined by scanning electron mi‐croscopy, the Brunauer‐Emmett‐Teller method, X‐ray diffraction, H2 temperature‐programed re‐duction and X‐ray photoelectron spectroscopy. The results demonstrate that the addition of a Zn promoter improves both the light olefin selectivity over the catalyst and the catalyst stability. The catalysts prepared via the impregnation method, which contain greater quantities of surface ZnO, exhibit severe carbon deposition following activity trials. In contrast, those materials synthesized using the microwave‐hydrothermal approach show improved dispersion of Zn and Fe phases and decreased carbon deposition, and so exhibit better CO conversion and stability.

Promotion Effects of Ceria on Fischer-Tropsch Synthesis Performance of Co/Al_2O_3 Catalyst

The addition of small amounts of ceria to Co/Al2O3 catalysts increases the turnover rate of the catalyst and C5+ selectivity in the Fischer-Tropsch synthesis. In this work, the amounts of ceria, the calcination temperature, the temperature-programmed reduction (TPR), the temperature-programmed oxidation (TPO), and XRD are investigated. The results show that the addition of small amounts of ceria to Co/Al2O3 catalyst (Ce/Co≈1∶ 10 ～1∶ 7, atom) can increase the CO conversion and liquid yield, while the calcination temperature can control both the chain growth probability and CO conversion in a reverse trend. The TPR and TPO experiments show that small amounts of Ceria can improve the reducibility, but the amounts of carbon deposit increase, and two-type carbon deposition is found in the short-term reaction catalyst.

Recent advances in understanding the key catalyst factors for Fischer-Tropsch synthesis

Catalytic conversion of synthesis gas （CO＋H2） into hydrocarbons, also known as Fischer-Tropsch （FT） synthesis, is a crucial reaction for the translbrmation of non-petroleum carbon resources such as coal, natural gas, shale gas, coal-bed gas and biogas, as well as biomass into liquid fuels and chemicals. Many factors can influence the catalytic behavior of a FT catalyst. This review highlights recent advances in understanding some key catalyst factors, including the chemical state of active phases, the promoters, the size and the microenvironment of active phase, which determine the CO conversion activity and the product selectivity, particularly the selectivity to C5 ＋ hydrocarbons.

Study of Manganese Promoter on a Precipitated Iron-Based Catalyst for Fischer-Tropsch Synthesis

The effects of Manganese （Mn） incorporation on a precipitated iron-based Fischer-Tropsch synthesis （FTS） catalyst were investigated using N2 physical adsorption, air differential thermal analysis （DTA）, H2 temperature-programmed reduction （TPR）, and Mǒssbauer spectroscopy. The FTS performances of the catalysts were tested in a slurry phase reactor. The characterization results indicated that Mn increased the surface area of the catalyst, and improved the dispersion of （α-Fe2O3 and reduced its crystallite size as a result of the high dispersion effect of Mn and the Fe-Mn interaction. The Fe-Mn interaction also suppressed the reduction of （α-Fe2O3 to Fe3O4, stabilized the FeO phase, and （or） decreased the carburization degree of the catalysts in the H2 and syngas reduction processes. In addition, incorporated Mn decreased the initial catalyst activity, but improved the catalyst stability because Mn restrained the reoxidation of iron carbides to Fe3O4, and improved further carburization of the catalysts. Manganese suppressed the formation of CH4 and increased the selectivity to light olefins （C2-4^=）, but it had little effect on the selectivities to heavy （C5＋） hydrocarbons. All these results indicated that the strong Fe-Mn interaction suppressed the chemisorptive effect of the Mn as an electronic promoter, to some extent, in the precipitated iron-manganese catalyst system.

A facile solvent-free synthesis strategy for Co-imbedded zeolite-based Fischer-Tropsch catalysts for direct gasoline production

A series of Co-imbedded zeolite-based catalysts were synthesized following a facile solvent-free grinding route.The catalytic performance for direct syngas conversion to gasoline range hydrocarbons was compared with their counterpart Co-impregnated zeolite-based catalysts.Successful transformation of solid raw materials to targeted zeolite was confirmed by XRD,SEM,STEM,and N2 physisorption analysis.An in-depth study of acidic strength and acidic site distribution was conducted by NH3-TPD and Py-IR spectroscopy.Acidic strength showed a pivotal role in defining product range.Co@S1,with the weakest acidic strength of silicalite-1 among three types of zeolites,evaded over-cracking of product and exhibited the highest gasoline and isoparaffin selectivity(≈70%and 30.7%,respectively).Moreover,the solvent-free raw material grinding route for zeolite synthesis accompanies several advantages like the elimination of production of wastewater,high product yield within confined crystallization space,and elimination of safety concerns regarding high pressure due to the absence of the solvent.Facileness and easiness of the solvent-free synthesis route together with promising catalytic performance strongly support its application on the industrial scale.

Study on iron-manganese catalysts for Fischer-Tropsch synthesis

铁锰催化剂被一起沉淀方法准备。催化剂的描述被使用 X 光衍射(XRD ) 执行，扫描电子显微镜学(SEM ) ，温度程序减小(TPR ) ， N2 吸附解吸附作用大小。从 Fischer-Tropsch 合成的催化表演测试的结果证明铁锰催化剂对催化剂作文和材料来源敏感过度。当 CH4 和 CO2 由使用从铁(II ) 准备的铁锰催化剂减少了时， C24 轻石蜡增加了，这被发现当 CH4 和 CO2 由使用从铁(II ) 准备的铁锰催化剂减少了时硫酸盐(催化剂) 。催化剂的活动和选择处于不同运作的条件被学习。结果证明为 C24 轻石蜡生产的最好的运作的条件在 260 点是 H2/CO=1/1 (GHSV=2400 h1 )

Effect of Manganese Incorporation Manner on an Iron-Based Catalyst for Fischer-Tropsch Synthesis

A systematic study was undertaken to investigate the effects of the manganese incorporation manner on the textural properties, bulk and surface phase compositions, reduction/carburization behaviors, and surface basicity of an iron-based Fischer-Tropsch synthesis （FTS） catalyst. The catalyst samples were characterized by N2 physisorption, X-ray photoelectron spectroscopy （XPS）, H2 （or CO） temperature-programmed reduction （TPR）, CO2 temperature-programmed desorption （TPD）, and M5ssbauer spectroscopy. The FTS performance of the catalysts was studied in a slurry-phase continuously stirred tank reactor （CSTR）. The characterization results indicated that the manganese promoter incorporated by using the coprecipitation method could improve the dispersion of iron oxide, and decrease the size of the iron oxide crystallite. The manganese incorporated with the impregnation method is enriched on the catalyst＇s surface. The manganese promoter added with the impregnation method suppresses the reduction and carburization of the catalyst in H2, CO, and syngas because of the excessive enrichment of manganese on the catalyst surface. The catalyst added manganese using the coprecipitation method has the highest CO conversion （51.9%） and the lowest selectivity for heavy hydrocarbons （C12＋）.

Effect of Al_2O_3 Binder on the Precipitated Iron-Based Catalysts for Fischer-Tropsch Synthesis

A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.

Metal-organic framework(MOF)-derived catalysts for Fischer-Tropsch synthesis: Recent progress and future perspectives

Fischer-Tropsch Synthesis(FTS) is an important catalytic chemical reaction that converts a mixture of CO and H2(syngas) derived from biomass, coal or natural gas into ultra-clean fuels or value-added chemicals. However, most traditional catalysts used in the Fischer-Tropsch process are faced with the problems of high deactivation rate triggered by sintering, phase changes and oxidation which hamper their catalytic performance. Metal-organic frameworks(MOFs)-derived materials have been a promising alternative in addressing the catalyst deactivation problems in FTS because of the encapsulation of their metal nanoparticles in carbon matrix and absence of large particle size, among other reasons. Therefore, this review emphasizes the most recent research headway in the investigation of MOFs as precursors to achieve high-performance FTS catalysts. Precisely, the design of iron and cobalt-based FTS catalysts from parent MOFs via MOF-mediated synthesis, the catalytic activity of the MOF-derived materials and the promoter effects under FTS operation were outlined and discussed. We have also evaluated the influence of MOF structures on the FTS performance and compared them with traditional/commercially available catalysts to show the importance of this approach. Finally, the challenges and opportunities to further expedite the extensive research efforts and promote their applications in material design and FT technology were mentioned.

Effect of nano-particle size on product distribution and kinetic parameters of Fe/Cu/La catalyst in Fischer-Tropsch synthesis

Effects of nano-particle size on hydrocarbon production rates and distributions for precipitated Fe/Cu/La catalysts in Fischer-Tropsch synthesis were investigated.Nano-structured iron catalyst was prepared by micro-emulsion method.The concept of two superimposed AndersonSchulz-Flory （ASF） distributions has been applied for the representation of the effects of reaction conditions and nano-particles size on kinetics parameters and product distributions.These results reveal that by reducing the particle size of catalyst,the break in ASF distributions was decreased.Also useful different kinetics equations for synthesis of C3 to C9 and C10 to C22 were determined by using α1 and α2 chain growth probabilities.

Effects of the Different Supports on the Activity and Selectivity of Iron-Cobalt Bimetallic Catalyst for Fischer-Tropsch Synthesis

Silica, alumina, and activated carbon supported iron-cobalt catalysts were prepared by incipient wetness impregnation. These catalysts have been characterized by BET, X-ray diffraction （XRD）, and temperature-programmed reduction （TPR）. Activity and selectivity of iron-cobalt supported on different carriers for CO hydrogenation were studied under the conditions of 1.5 MPa, 493 K, 630 h^-1, and H2/CO ratio of 1.6. The results indicate that the activity, C4 olefin/（C4 olefin＋C4 paraffin） ratio, and C5 olefin/（C5 olefin＋C5 paraffin） decrease in the order of Fe-Co/SiO2, Fe-Co/AC1, Fe-Co/Al2O3 and Fe- Co/AC2. The activity of Fe-Co/SiO2 reached a maximum. The results of TPR show that the Fe-Co/SiO2 catalyst is to some extent different. XRD patterns show that the Fe-Co/SiO2 catalyst differs significantly from the others; it has two diffraction peaks. The active spinel phase is correlated with the supports.

Kinetics and product distribution studies on ruthenium-promoted cobalt/alumina Fischer-Tropsch synthesis catalyst

Hydrocarbon production rates and distributions on ruthenium promoted alumina supported cobalt Fischer-Tropsch synthesis （FTS） catalyst were studied by the concept of two superimposed Anderson-Schulz-Flory （ASF） distributions.The results indicated that the characterizing growth probabilities α1 and α2 were strongly dependent on reaction conditions.By increasing the H2 /CO partial pressure ratios and reaction temperatures,deviation from normal ASF distribution decreases and the double-α-ASF distribution changes into a straight line.Based on the concept of double-α-ASF distribution,a useful rate equation for the production of hydrocarbons under industrial reaction conditions is obtained.

Fischer-Tropsch synthesis by nano-structured iron catalyst

Effects of nanoscale iron oxide particles on textural structure,reduction,carburization and catalytic behavior of precipitated iron catalyst in Fischer-Tropsch synthesis（FTS） are investigated.Nanostructured iron catalysts were prepared by microemulsion method in two series.Firstly,Fe2O3 ,CuO and La2O3 nanoparticles were prepared separately and were mixed to attain Fe/Cu/La nanostructured catalyst（sep-nano catalyst）;Secondly nanostructured catalyst was prepared by co-precipitation in a water-in-oil microemulsion method（mix-nano catalyst）.Also,conventional iron catalyst was prepared with common co-precipitation method.Structural characterizations of the catalysts were performed by TEM,XRD,H2 and CO-TPR tests.Particle size of iron oxides for sep-nano and mix-nano catalysts,which were determined by XRD pattern（Scherrer equation） and TEM images was about 20 and 21.6 nm,respectively.Catalyst evaluation was conducted in a fixed-bed stainless steel reactor and compared with conventional iron catalyst.The results revealed that FTS reaction increased while WGS reaction and olefin/paraffin ratio decreased in nanostructured iron catalysts.

Product distributions of Fischer-Tropsch synthesis over Co/AC catalyst

The product distributions of Fischer-Tropsch synthesis over Co/AC catalyst are investigated under different reaction conditions in an integral fixed bed reactor.It is found that the product distributions deviate from the ASF distribution.The deviation from ASF distribution is analyzed by taking the readsorption of alkenes and the following secondary reaction into consideration.It is noted that the contents of alcohol,alkene and alkane decline with the increasing carbon number,showing a slighter declining tendency of alkanes than those of alkenes and alcohols.It is also found that high temperature,space velocity,H2/CO in feed gas and low pressure are preferential for light hydrocarbons and alcohols while against the chain propagation.The effect of space velocity on the product distributions especially on the light products is not obvious.It is noticed that low temperature,space velocity,H2/CO and high pressure lead to high contents of alcohols;high temperature,H2/CO and low space velocity lead to high contents of alkanes.The effect of pressure on the amounts of alkanes is not significant;high space velocity and low temperature,pressure,H2/CO are preferential for alkenes.

Deactivation studies of nano-structured iron catalyst in Fischer-Tropsch synthesis

A nano-structured iron catalyst for syngas conversion to hydrocarbons in Fischer-Tropsch synthesis（FTS） was prepared by micro-emulsion method.Compositions of bulk iron phase and phase transformations of carbonaceous species during catalyst deactivation in FTS reaction were characterized by temperature-programmed surface reaction with hydrogen（TPSR-H 2 ）,and XRD techniques.Many carbonaceous species on surface and bulk of the nano-structured iron catalysts were completely identified by combined TPSR-H 2 and XRD spectra and which were compared with those recorded on conventional co-precipitated iron catalyst.The results reveal that the catalyst deactivation results from the formation of inactive carbide phases and surface carbonaceous species like graphite,and it will be increased when the particle size of iron oxides was reduced in FTS iron catalyst.

Kinetics of the water-gas shift reaction in Fischer-Tropsch synthesis over a nano-structured iron catalyst

Based on formate and direct oxidation mechanisms,three Langmuir-Hinshelwood-Hougen-Watson （LHHW） kinetic models of the water-gasshift （WGS） reaction over a nano-structured iron catalyst under Fischer-Tropsch synthesis （FTS） reaction conditions were derived and compared with those over the conventional catalyst.The conventional and nanostructured Fe/Cu/La/Si catalysts were prepared by co-precipitation of Fe and Cu nitrates in aqueous media and water-oil micro-emulsion,respectively.The WGS kinetic data were measured by experiments over a wide range of reaction conditions and comparisons were also made for various rate equations.WGS rate expressions based on the formate mechanism with the assumption that the formation of formate is rate determining step were found to be the best.

Influence of lanthanum on the performance of Zr-Co/activated carbon catalysts in Fischer-Tropsch synthesis

The influence of La loading on Zr-Co/activated carbon （AC） catalysts has been studied for Fischer-Tropsch synthesis. The catalyst samples were characterized by XRD, TPR, CO-TPD, and temperature programmed CO hydrogenation. The catalytic property was evaluated in a fixed bed reactor. The experimental results showed that CO conversion increased from 86.4% to 92.3% and the selectivity to methane decreased from 14.2% to 11.5% and C5＋ selectivity increased from 71.0% to 74.7% when low La loading （La = 0.2wt%） was added into the Zr-Co/AC catalyst. However, high loadings of La （La = 0.3-1.0 wt%） would decrease catalyst activity as well as the C5＋ selectivity and increase methane selectivity. XRD results displayed that La-modified Zr-Co/AC catalyst had little effect on the dispersion of Co catalyst. But, the results of TPR, CO-TPD, and temperature programmed CO hydrogenation techniques indicated that the extent of cobalt reduction was found to greatly influence the activity and selectivity of the catalyst. The addition of a small amount of La increased the reducibility of the Zr-Co/AC catalyst and restrained the formation of methane and improved the selectivity to long chain hydrocarbons. However, excess of La led to the decrease of the reducibility of Co catalyst thus resulted in higher methanation activity.