Sparse Rev-Shift Coded Modulation with Novel Overhead Bound

To provide reliability in distributed systems,combination property(CP)is desired,where k original packets are encoded into n≥k packets and arbitrary k are sufficient to reconstruct all the original packets.Shift-and-add(SA)encoding combined with zigzag decoding(ZD)obtains the CP-ZD,which is promising to reap low computational complexity in the encoding/decoding process of these systems.As densely coded modulation is difficult to achieve CP-ZD,research attentions are paid to sparse coded modulation.The drawback of existing sparse CP-ZD coded modulation lies in high overhead,especially in widely deployed setting m<k,where m≜n−k.For this scenario,namely,m<k,a sparse reverseorder shift(Rev-Shift)CP-ZD coded modulation is designed.The proof that Rev-Shift possesses CP-ZD is provided.A lower bound for the overhead,as far as we know is the first for sparse CP-ZD coded modulation,is derived.The bound is found tight in certain scenarios,which shows the code optimality.Extensive numerical studies show that compared to existing sparse CP-ZD coded modulation,the overhead of Rev-Shift reduces significantly,and the derived lower bound is tight when k or m approaches 0.

Optimization of Mapping Rule of Bit-Interleaved Turbo Coded Modulation with 16QAM

Optimization of mapping rule of bit-interleaved Turbo coded modulation with 16 quadrature amplitude modulation (QAM) is investigated based on different impacts of various encoded bits sequence on Turbo decoding performance. Furthermore, bit-interleaved in-phase and quadrature phase (I-Q) Turbo coded modulation scheme are designed similarly with I-Q trellis coded modulation (TCM). Through performance evaluation and analysis, it can be seen that the novel mapping rule outperforms traditional one and the I-Q Turbo coded modulation can not achieve good performance as expected. Therefore, there is not obvious advantage in using I-Q method in bit-interleaved Turbo coded modulation.

Feedback Stabilization over Wireless Network Using Adaptive Coded Modulation

In this paper,we apply adaptive coded modulation (ACM) schemes to a wireless networked control system (WNCS) to improve the energy efficiency and increase the data rate over a fading channel.To capture the characteristics of varying rate, interference,and routing in wireless transmission channels,the concepts of equivalent delay (ED) and networked condition index (NCI) are introduced.Also,the analytic lower and upper bounds of EDs are obtained.Furthermore,we model the WNCS as a multicontroller switched system (MSS) under consideration of EDs and loss index in the wireless transmission.Sufficient stability condition of the closed-loop WNCS and corresponding dynamic state feedback controllers are derived in terms of linear matrix inequality (LMI). Numerical results show the validity and advantage of our proposed control strategies.

Coded Modulation Faster-than-Nyquist Transmission with Precoder and Channel Shortening Optimization

Faster-than-Nyquist(FTN)signaling can improve the spectrum efficiency(SE)of the transmission system.In this paper,we propose a coded modulation FTN(CM-FTN)transmission scheme with precoder and channel shortening(CS)optimization to improve bit error rate(BER)performance and reduce the complexity of FTN equalizer.In our proposal,the information rate(IR)or spectral efficiency(SE)is employed and verified as a better performance metric for CM-FTN than the minimum Euclidian distance(MED).The precoder of CM-FTN is optimized for maximizing the IR criterion using the bare-bones particle swarm optimization(BB-PSO)algorithm.Further,a three-carrier CM-FTN system model is used to capture the broadening effect of precoder.Also targeting for the IR maximization,the inter-symbol interference(ISI)length for CS is optimized to reduce the receiver complexity without performance loss.Simulation results demonstrate that our method has a 0.6dB precoding gain compared with the nonprecoding scheme and a maximum of 87.5%of the complexity of FTN equalizer is reduced without BER loss.

Dual Adaptive Turbo Coded Modulation for Integrated Multimedia Service Transmission

This paper proposes a cross-layer dual adaptive coded modulation architecture using turbo codes for mobile multimedia communication, which adapts to both the varying channel characteristics and the QoS of various multimedia services simultancously to increase the average system throughput substantially. A pragmatic channeladaptive turbo coded modulation schcme, which comes within 2.5 dB of the Shannon limit, is optimally designed, and then a QoS-adaptive scheme is superimposed to build the dual adaptive architecture. Simulation results show that the novel dual adaption reduces the gap from the fading channel capacity to 2 dB when assuming different services occur in equal probability and the service duration follows exponential distribution.

Pragmatic Approach to Adaptive Turbo Coded Modulation

This paper presents a pragmatic adaptive scheme for TuCM over slowly fading channels. The adaptive scheme employs a single turbo coded modulator composed of a variable-rate turbo encoder and a variable-rate variable-power MQAM for all fading regions, so it has an acceptable complexity to implement. The optimal adaptive TuCM scheme is determined subject to various system constraints. Simulations have been performed to measure the performance of the scheme for different parameters. It is shown that adopting both the turbo coded modulator and the transmit power achieves a performance within 2.5 dB of the fading channel capacity.

Performance analysis of adaptive turbo coded modulation with time delay

The method of data fitting is applied to obtain the BER expression for turbo coded modulation, and a fitting mathematical model is proposed, which resolves the problem that there is no exact BER expression for turbo coded modulation in performance analysis. With the time delay consideration, the performance of BER of adaptive turbo coded modulation is analyzed and simulated. The results show that adaptive turbo coded modulation is very sensitive to time delay. In order to meet the target BER requirement, the total time delay should be less than 0 001/f D.

Achievable secrecy rate of bit-interleaved coded modulation schemes

We study the impact of various modulation mapping strategies and signal constellation shapes on the se- crecy rates achievable with bit-interleaved coded modulation （BICM） schemes. Transmission over an ergodic Rayleigh fading channel is assumed throughout this work. Various constellations and mapping techniques are considered in this work to maximize the capacity difference between the main channel and the eavesdropper channel, rather than to opti- mize the capacity of both channels. We show that in terms of achievable secrecy rate, Gray and Quasi-Gray mappings only perform Well at low SNR but outperformed by other mapping techniques when SNR increases. The proper design of signal mapping can significantly enhance the achievable secrecy rate in BICM schemes. It is indicated that the key parameter to the secrecy rate of a BICM system is the distance spectrum of Euclidean distances for mappings.

A channel- and QoS-adaptive turbo coded modulation architecture for mobile multimedia communication

This paper proposed a cross-layer dual adaptive coded modulation architecture using turbo codes for mobile muhimedia communication, which simultaneously adapted to both the varying channel characteristics and the quality of service （QoS） of various mobile multimedia services to increase the average system throughput substantially. A pragmatic channel-adaptive turbo coded modulation scheme, which comes within 2.5dB of the Shannon limit, was optimally designed, and then a QoS-adaptive scheme was superimposed to build the dual adaptive architecture. Simulation results show that the novel dual adaption reduces the difference with the fading channel capacity to 2dB when assuming different services occur in equal probability and the service duration follows the exponential distribution.

AN ITERATIVE RELIABILITY-BASED DECODING FOR LDPC CODED MODULATION SYSTEM

In this paper, A Belief Propagation concatenated Orderd-Statistic Decoder (BP-OSD) based on accumulated Log-Likelihood Ratio (LLR) is proposed for medium and short lengths Low Density Parity-Check (LDPC) codes coded Bit-Interleaved Coded Modulation (BICM) systems. The accumulated soft output values delivered by every BP iteration are used as reliability values of Soft-Input Soft-Output OSD (SISO-OSD) decoder and the soft output of SISO-OSD is used as a priori probabilities of the demodulator for the next iteration. Simulation results show that this improved algorithm achieves noticeable performance gain with only modest increase in computation complexity.

A NEW LABELING SEARCH ALGORITHM FOR BIT-INTERLEAVED CODED MODULATION WITH ITERATIVE DECODING

Bit-Interleaved Coded Modulation with Iterative Decoding (BICM-ID) is a bandwidth ef- ficient transmission, where the bit error rate is reduced through the iterative information exchange between the inner demapper and the outer decoder. The choice of the symbol mapping is the crucial design parameter. This paper indicates that the Harmonic Mean of the Minimum Squared Euclidean (HMMSE) distance is the best criterion for the mapping design. Based on the design criterion of the HMMSE distance, a new search algorithm to find the optimized labeling maps for BICM-ID system is proposed. Numerical results and performance comparison show that the new labeling search method has a low complexity and outperforms other labeling schemes using other design criterion in BICM-ID system, therefore it is an optimized labeling method.

Design of Protograph LDPC-Coded MIMO-VLC Systems with Generalized Spatial Modulation

This paper investigates the bit-interleaved coded generalized spatial modulation(BICGSM) with iterative decoding(BICGSM-ID) for multiple-input multiple-output(MIMO) visible light communications(VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain(SiD) symbols and the spatial-domain(SpD) light emitting diode(LED)-index patterns are coded by a protograph low-density parity-check(P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating(SSER) method for constructing a type of novel generalized spatial modulation(GSM) constellations, referred to as SSERGSM constellations, so as to boost the performance of the BICGSM-ID MIMO-VLC systems.Moreover, by applying a modified PEXIT(MPEXIT) algorithm, we further design a family of rate-compatible P-LDPC codes, referred to as enhanced accumulate-repeat-accumulate(EARA) codes,which possess both excellent decoding thresholds and linear-minimum-distance-growth property. Both analysis and simulation results illustrate that the proposed SSERGSM constellations and P-LDPC codes can remarkably improve the convergence and decoding performance of MIMO-VLC systems. Therefore, the proposed P-LDPC-coded SSERGSM-mapped BICGSMID configuration is envisioned as a promising transmission solution to satisfy the high-throughput requirement of MIMO-VLC applications.

Path Weight Complementary Convolutional Code for Type-Ⅱ Bit-Interleaved Coded Modulation Hybrid ARQ System

Bit-interleaved coded modulation (BICM) is suitable to bandwidth-efficient communication systems. Hybrid automatic repeat request (HARQ) can provide more reliability to high-speed wireless data transmission. A new path weight complementary convolutional (PWCC) code used in the type-Ⅱ BICM-HARQ system is proposed. The PWCC code is composed of the original code and the complimentary code. The path in trellis with large hamming weight of the complimentary code is designed to compensate for the path in trellis with small hamming weight of the original code. Hence, both of the original code and the complimentary code can achieve the performance of the good code criterion of corresponding code rate. The throughput efficiency of the BICM-HARQ system wit PWCC code is higher than repeat code system, a little higher than puncture code system in low signal-to-noise ratio (SNR) values and much higher than puncture code system, the same as repeat code system in high SNR values. These results are confirmed by the simulation.

A novel bit mapping scheme for high-order polar coded modulation systems

In order to improve the spectrum efficiency of the high-order polar coded modulation systems, the polar code is used as the component code of the bit-interleave coded modulation(BICM) system, a novel bit mapping scheme is proposed considering of the channel polarization and successive cancellation(SC) decoding principle of polar codes as well as the unequal protection of equivalent channels by modulator. In this scheme, the frozen bits on the unreliable split channel are allocated to the equivalent channel with the low protection of the modulator, while the equivalent channels with the high protection are used to transmit the information bits. Thus, the error-correcting performance of polar codes is improved. Compared with some bit mapping schemes, the proposed bit mapping scheme only needs to divide and choose the parameters of the split channels reliability measurement, the complexity does not increase obviously, and simulation results show that the proposed scheme has the better performance under the quadrature amplitude modulation(QAM) modulation based on the Gray mapping.

SR-DCSK Cooperative Communication System with Code Index Modulation:A New Design for 6G New Radios

This paper proposes a high-throughput short reference differential chaos shift keying cooperative communication system with the aid of code index modulation,referred to as CIM-SR-DCSK-CC system.In the proposed CIM-SR-DCSK-CC system,the source transmits information bits to both the relay and destination in the first time slot,while the relay not only forwards the source information bits but also sends new information bits to the destination in the second time slot.To be specific,the relay employs an N-order Walsh code to carry additional log_(2)N information bits,which are superimposed onto the SRDCSK signal carrying the decoded source information bits.Subsequently,the superimposed signal carrying both the source and relay information bits is transmitted to the destination.Moreover,the theoretical bit error rate(BER)expressions of the proposed CIMSR-DCSK-CC system are derived over additive white Gaussian noise(AWGN)and multipath Rayleigh fading channels.Compared with the conventional DCSKCC system and SR-DCSK-CC system,the proposed CIM-SR-DCSK-CC system can significantly improve the throughput without deteriorating any BER performance.As a consequence,the proposed system is very promising for the applications of the 6G-enabled lowpower and high-rate communication.

Study on the Optimized Demodulation and Decoding of the BICM-ID system coded with LDPC

The demodulation and decoding solution commonly used in the bit interleaving code modulation and the LDPC coded demodulation and decoding system of the iterative decoding （BICM-ID） is to report the soft information output from the decoder of the receiver to the demodulator as priori information for completing the decoding. However, this will give rise to the reduction of the minimum Euclidean distances between codes, so that the performances of the system decline under non-fading Gaussian channel. According to this problem, an optimized iterative demodulation decoding solution is proposed and also is analyzed using simulation. The result shows that this solution can improve the demodulation and decoding performances of LDPC coded modulation and demodulation system.

Iterative Demodulation and Decoding Scheme with 16 QAM

Iterative demodulation and decoding scheme is analyzed and modulation labeling is considered to be one of the crucial factors to this scheme. By analyzing the existent mapping design criterion, four aspects are found as the key techniques for choosing a label mapping. Based on this discovery, a novel mapping design criteflon is proposed and two label mappings are searched according to it. Simulation results show that the performance of BICM-ID using the novel mappings is better than the former ones. The extrinsic information transfer （EXIT） chart is introduced and it is used to evaluate the proposed mapping design criteria.

Iterative Noncoherent Block Detection of Coded MPSK for Cooperative Relay Systems

Maximum likelihood(ML) noncoherent block detection techniques are investigated for block-coded MPSK modulation in cooperative decode-and-forward relay systems over slow fading channels.A decision-directed iterative Viterbi algorithm(IVA) is derived for a suboptimal ML noncoherent detection.Simulation results show that the IVA can approach the error performances of the exhaustive detection method but at a lower complexity.

Low Complexity Minimum Mean Square Error Channel Estimation for Adaptive Coding and Modulation Systems

Performance of the Adaptive Coding and Modulation(ACM) strongly depends on the retrieved Channel State Information(CSI),which can be obtained using the channel estimation techniques relying on pilot symbol transmission.Earlier analysis of methods of pilot-aided channel estimation for ACM systems were relatively little.In this paper,we investigate the performance of CSI prediction using the Minimum Mean Square Error(MMSE)channel estimator for an ACM system.To solve the two problems of MMSE:high computational operations and oversimplified assumption,we then propose the Low-Complexity schemes(LC-MMSE and Recursion LC-MMSE(R-LC-MMSE)).Computational complexity and Mean Square Error(MSE) are presented to evaluate the efficiency of the proposed algorithm.Both analysis and numerical results show that LC-MMSE performs close to the wellknown MMSE estimator with much lower complexity and R-LC-MMSE improves the application of MMSE estimation to specific circumstances.

CONTROL STRATEGY FOR ELECTRO-HYDRAULIC POSITION SERVO SYSTEM WITH GENERALIZED PULSE CODE MODULATION

A hybrid control strategy has been designed and developed for the electro-hydraulic posi-tion servo control system with generalized Pulse code modulation （GPCM）, which is suitable for the area where the work condition is poor and a large flow rate is required. It is difficult to control the GPCM system because the system is discrete. With consideration of the stability and speediness of the GPCM position servo control system, a control strategy is developed through the theoretical and ex-perimental analyses. The control strategy integrates the merits of Bang-Bang control, PID control and fuzzy control. With this hybrid control strategy, the electro hydraulic control system has good per-formances, and the servo control is carried out with GPCM through on-off valves.