Efficient Broadcast Retransmission Based on Network Coding for InterPlaNetary Internet

In traditional wireless broadcast networks,a corrupted packet must be retransmitted even if it has been lost by only one receiver.Obviously,this is not bandwidth-efficient for the receivers that already hold the retransmitted packet.Therefore,it is important to develop a method to realise efficient broadcast transmission.Network coding is a promising technique in this scenario.However,none of the proposed schemes achieves both high transmission efficiency and low computational complexity simultaneously so far.To address this problem,a novel Efficient Opportunistic Network Coding Retransmission(EONCR)scheme is proposed in this paper.This scheme employs a new packet scheduling algorithm which uses a Packet Distribution Matrix(PDM)directly to select the coded packets.The analysis and simulation results indicate that transmission efficiency of EONCR is over 0.1,more than the schemes proposed previously in some simulation conditions,and the computational overhead is reduced substantially.Hence,it has great application prospects in wireless broadcast networks,especially energyand bandwidth-limited systems such as satellite broadcast systems and Planetary Networks(PNs).

Modeling Methods for the Main Switch of High Pulsed-Power Facilities Based on Transmission Line Code

Based on the transmission line code （TLCODE）, a circuit model is developed here for analyses of main switches in the high pulsed-power facilities. With the structure of the ZR main switch as an example, a circuit model topology of the switch is proposed, and in particular, calculation methods of the dynamic inductance and resistance of the switching arc are described. Moreover, a set of closed equations used for calculations of various node voltages are theoretically derived and numericMly discretized. Based on these discrete equations and the Matlab program, a simulation procedure is established for analyses of the ZR main switch. Voltages and currents at different key points are obtained, and comparisons are made with those of a PSpice L-C model. The comparison results show that these two models are perfectly in accord with each other with discrepancy less than 0.1%, which verifies the effectiveness of the TLCODE model to a certain extent.

Simulation Analysis of Transmission-Line Impedance Transformers for Petawatt-Class Pulsed Power Accelerators

Based on the transmission line code TLCODE, a 1D circuit model for a transmission- line impedance transformer was developed and the simulation results were compared with those in the literature. The model was used to quantify the efficiencies of voltage-transport, energy- transport and power-transport for a transmission-line impedance transformer as functions of ψ （the ratio of the output impedance to the input impedance of the transformer） and Г （the ratio of the pulse width to the one-way transit time of the transformer） under a large scale of m （the coefficient of the generalized exponential impedance profile）. Simulation results suggest that with the increase in Г, from 0 to ∞, the power transport efficiency first increases and then decreases. The maximum power transport efficiency can reach 90% or even higher for an exponential impedance profile （m = 1）. With a consideration of dissipative loss in the dielectric and electrodes of the transformer, two representative designs of the water-insulated transformer are investigated for the next generation of petawatt-class z-pinch drivers. It is found that the dissipative losses in the electrodes are negligibly small, below 0.1%, but the dissipative loss in the water dielectric is about 1% to 4%.

Transmissive 2-bit anisotropic coding metasurface

Coding metasurfaces have attracted tremendous interests due to unique capabilities of manipulating electromagnetic wave.However,archiving transmissive coding metasurface is still challenging.Here we propose a transmissive anisotropic coding metasurface that enables the independent control of two orthogonal polarizations.The polarization beam splitter and the orbital angular momentum(OAM)generator have been studied as typical applications of the anisotropic 2-bit coding metasurface.The simulated far field patterns illustrate that the x and y polarized electromagnetic waves are deflected into two different directions,respectively.The anisotropic coding metasurface has been experimentally verified to realize an OAM beam with l=2 of right-handed polarized wave,resulting from both contributions from linear-to-circular polarization conversion and the phase profile modulation.This work is beneficial to enrich the polarization manipulation field and develop transmissive coding metasurfaces.

How to Achieve Both “Physical Isolation” and “Secure File Transfer” under the State of Strong Supervision

Communication security involves all aspects of the country and society,and financial security is of top priority.Through strong supervision and strong technical means,a“semaphore”file exchange station is established.The data transmission system is composed of a sending server,a receiving server,and a“semaphore”communication box.Physical connections between internal and external networks are eliminated to achieve the purpose of“physical isolation”and“secure file transfer”.

Secure Transmission Scheme for Parallel Relay Channels Based on Polar Coding

This paper considers the use of polar codes to enable secure transmission over parallel relay channels.By exploiting the properties of polar codes over parallel channels, a polar encoding algorithm is designed based on Channel State Information（CSI） between the legitimate transmitter（Alice） and the legitimate receiver（Bob）.Different from existing secure transmission schemes, the proposed scheme does not require CSI between Alice and the eavesdropper（Eve）. The proposed scheme is proven to be reliable and shown to be capable of transmitting information securely under Amplify-and-Forward（AF） relay protocol, thereby providing security against passive and active attackers.

Fiber-based optical parametric amplifier for 40-Gb/s NRZ-DPSK signal transmission system employing QC-LDPC codes

In this letter, we investigate quasi-cyclic low-density parity-check （QC-LDPC） codes in a 40-Gb/s nonreturn-to-zero differential phase-shift keying （NRZ-DPSK） signal transmission system based on a fiber- based optical parametric amplifier （FOPA）. A constructed algorithm of QC-LDPC codes according to the optimizing set of shift vMues on the circulant permutation matrix （CPM） of the basis matrix is proposed. Simulation results prove that the coding gain in the encoded system can be realized at 10.2 dB under QC- LDPC codes with a code rate of 5/6 when the bit error rate （BER） is 10-9. In addition, the error-floor level originating from the uncoded system is suppressed.