Bottomless electromagnetic cold crucible is a new apparatus for continuous melting and directional solidification;however,improving its power efficiency and optimizing the configuration are important for experiment an...Bottomless electromagnetic cold crucible is a new apparatus for continuous melting and directional solidification;however,improving its power efficiency and optimizing the configuration are important for experiment and production.In this study,a 3-D finite element (FE) method based on experimental verification was applied to calculate the magnetic flux density (Bz).The effects of the power parameters and the induction coil on the magnetic field distribution in the cold crucible were investigated.The results show that higher current intensity and lower frequency are beneficial to the increase of Bz at both the segment midpoint and the slit location.The induction coil with racetrack section can induce greater Bz,and a larger gap between the induction coil and the shield ring increases Bz.The mechanism for this effect is also discussed.展开更多
A novel electromagnetic induction detector with two inductors for CE was described here.The two inductors were used as signal detection and reference,respectively.The parameters affecting the detector performance（inc...A novel electromagnetic induction detector with two inductors for CE was described here.The two inductors were used as signal detection and reference,respectively.The parameters affecting the detector performance（including coil turns,detection distance, excitation frequency,voltage,etc.） were optimized.Under the optimum condition,the feasibility of the detector was examined by analyzing inorganic ions.The fabricated detector showed good linear relationship between the response and the analytes concentrations,with a detection limit of 13μmol/L for Na~＋（S/N = 3）.A variety of advantages,such as simple construction, ease of operation,and considerably universal response,suggested this novel detector a promising application prospect in analytical area.展开更多
This work particularly focuses on compensating Joule heat in under-heated areas occurred when thin steel bar is(<20 mm)heated by transverse flux induction heater(TFIH).The under-heated areas take place in range of ...This work particularly focuses on compensating Joule heat in under-heated areas occurred when thin steel bar is(<20 mm)heated by transverse flux induction heater(TFIH).The under-heated areas take place in range of 50~150 mm from the both edges,so Transverse Flux Induction Coil(TFIC)including a magnetic core is proposed and optimized to supplement this fault.The solutions on the electromagnetic field are obtained numerically by commercial code MAXWELL 3D software from ANSYS Corp.and then,verified experimentally by pilot-scale tests,in which the TFIH was manufactured with a nominal power of 100 kW at a fundamental frequency of 1 kHz.Ultimately,TFIC having geometrically the optimized magnetic core made the heating pattern U-shaped,so could supply a desirable temperature profile for the rolling process.展开更多
基金financially supported by the National Basic Research Program of China (Grant No.2011CB605504)
文摘Bottomless electromagnetic cold crucible is a new apparatus for continuous melting and directional solidification;however,improving its power efficiency and optimizing the configuration are important for experiment and production.In this study,a 3-D finite element (FE) method based on experimental verification was applied to calculate the magnetic flux density (Bz).The effects of the power parameters and the induction coil on the magnetic field distribution in the cold crucible were investigated.The results show that higher current intensity and lower frequency are beneficial to the increase of Bz at both the segment midpoint and the slit location.The induction coil with racetrack section can induce greater Bz,and a larger gap between the induction coil and the shield ring increases Bz.The mechanism for this effect is also discussed.
基金support from the National Natural Science Foundation of China(Nos20727006 and 21075139)
文摘A novel electromagnetic induction detector with two inductors for CE was described here.The two inductors were used as signal detection and reference,respectively.The parameters affecting the detector performance（including coil turns,detection distance, excitation frequency,voltage,etc.） were optimized.Under the optimum condition,the feasibility of the detector was examined by analyzing inorganic ions.The fabricated detector showed good linear relationship between the response and the analytes concentrations,with a detection limit of 13μmol/L for Na~＋（S/N = 3）.A variety of advantages,such as simple construction, ease of operation,and considerably universal response,suggested this novel detector a promising application prospect in analytical area.
文摘This work particularly focuses on compensating Joule heat in under-heated areas occurred when thin steel bar is(<20 mm)heated by transverse flux induction heater(TFIH).The under-heated areas take place in range of 50~150 mm from the both edges,so Transverse Flux Induction Coil(TFIC)including a magnetic core is proposed and optimized to supplement this fault.The solutions on the electromagnetic field are obtained numerically by commercial code MAXWELL 3D software from ANSYS Corp.and then,verified experimentally by pilot-scale tests,in which the TFIH was manufactured with a nominal power of 100 kW at a fundamental frequency of 1 kHz.Ultimately,TFIC having geometrically the optimized magnetic core made the heating pattern U-shaped,so could supply a desirable temperature profile for the rolling process.
