In order to improve the thermal properties of coke, an industrial experiment on the coke spraying with ZBS additive solution was carried out at coking plant and No. 6 blast furnace （2 000 m^3 ） of Kunming Iron and S...In order to improve the thermal properties of coke, an industrial experiment on the coke spraying with ZBS additive solution was carried out at coking plant and No. 6 blast furnace （2 000 m^3 ） of Kunming Iron and Steel Co Ltd. The coke reaction index （CRI） of the coke spraying with ZBS additive solution decreases by 10. 56 %, and the coke strength after reaction （CSR） increases by 7.80% in comparison with those of the un-sprayed coke. During the experiment, the average iron output increases by 66. 69 t/d, and the coke rate is reduced by 5. 21 kg per ton iron, while the fluctuation of furnace temperture is small, and sulphur content in hot metal and 100% of hot metal are acceptable.展开更多
The maximum possibility of utilizing the Indian coking coals and inferior grade coking coal for producing metallurgical coke through non-recovery stamp charging tech_nology was investigated. Indian indigenous coals co...The maximum possibility of utilizing the Indian coking coals and inferior grade coking coal for producing metallurgical coke through non-recovery stamp charging tech_nology was investigated. Indian indigenous coals contained low percent of vitrinite （〈50%） and higher content of ash （〉15%） compared to imported coking coal. Therefore, the selection of appropriate proportion of different types of coals was a major challenge for coke makers. Coal blend selection criterion based on a single coefficient, named as composite coking potential （CCP）, was developed. The use of increased proportion of semi-soft coal （crucible swelling number of 2.5） and high ash （≥15%） indigenous coal in the range of 20%- 35% and 20%-65% respectively in the blends resulted in good quality of coke. Plant data of a non recovery coke oven were used for developing and validating the model. The results showed that the coke strength after reaction （CSR） varied in the range of 63.7%-67.7% and the M40 value was between 81.8 and 89.3 in both the cases.展开更多
文摘In order to improve the thermal properties of coke, an industrial experiment on the coke spraying with ZBS additive solution was carried out at coking plant and No. 6 blast furnace （2 000 m^3 ） of Kunming Iron and Steel Co Ltd. The coke reaction index （CRI） of the coke spraying with ZBS additive solution decreases by 10. 56 %, and the coke strength after reaction （CSR） increases by 7.80% in comparison with those of the un-sprayed coke. During the experiment, the average iron output increases by 66. 69 t/d, and the coke rate is reduced by 5. 21 kg per ton iron, while the fluctuation of furnace temperture is small, and sulphur content in hot metal and 100% of hot metal are acceptable.
文摘The maximum possibility of utilizing the Indian coking coals and inferior grade coking coal for producing metallurgical coke through non-recovery stamp charging tech_nology was investigated. Indian indigenous coals contained low percent of vitrinite （〈50%） and higher content of ash （〉15%） compared to imported coking coal. Therefore, the selection of appropriate proportion of different types of coals was a major challenge for coke makers. Coal blend selection criterion based on a single coefficient, named as composite coking potential （CCP）, was developed. The use of increased proportion of semi-soft coal （crucible swelling number of 2.5） and high ash （≥15%） indigenous coal in the range of 20%- 35% and 20%-65% respectively in the blends resulted in good quality of coke. Plant data of a non recovery coke oven were used for developing and validating the model. The results showed that the coke strength after reaction （CSR） varied in the range of 63.7%-67.7% and the M40 value was between 81.8 and 89.3 in both the cases.
