Nowadays, with regard to environmental issues, proper operation of wastewater treatment plants is of particular importance that in the case of inappropriate utilization, they will cause serious problems. Processes tha...Nowadays, with regard to environmental issues, proper operation of wastewater treatment plants is of particular importance that in the case of inappropriate utilization, they will cause serious problems. Processes that exist in environmental systems and environmental engineers are dealing with them mostly have two major characteristics: they are dependent on many variables;and there are complex relationships between its components which make them very difficult to analyze. Being familiar with characteristics of industrial town effluents from various wastewater treatment units, which have high qualitative and quantitative variations and more uncertainties compared to urban wastewaters, plays very effective role in governing them. In order to achieve a better and efficient control over the operation of an industrial wastewater treatment plant, powerful mathematical tool can be used that is based on recorded data from some basic parameters of wastewater during a period of treatment plant operation. In this study, the multilayer perceptron (MLP) feed forward neural network with a hidden layer and stop training method was used to predict quality parameters of the industrial effluent. Data of this study are related to the Fajr Industrial Wastewater Treatment Plant located in Mahshahr—Iran that qualitative and quantitative characteristics of its units were used for training, calibration and evaluation of the neural model. Also, Principal Component Analysis technique was applied to modify and improve performance of generated models of neural networks. The results of this model showed good accuracy of the model in estimating qualitative pro- file of wastewater. This model facilitates evaluating the performance of each treatment plant units through comparing the results of prediction model with the standard amount of output.展开更多
The paper described the coking plant and Lurgi gasifier plant waste water types and characteristics , comparing the COD and ammonia-N level in different source of waste water in the plant.The currently maturity coking...The paper described the coking plant and Lurgi gasifier plant waste water types and characteristics , comparing the COD and ammonia-N level in different source of waste water in the plant.The currently maturity coking plant waste water treatment method was statement in the paper and analyzed the pros and cons of each method.The primary cost analysis of each type of waste water treatment was also completed in the paper.According to these analyses , recommendation was prepared for coking plant and Lurgi gasifier plant waste water treatment.展开更多
A detailed study regarding the optimization of a complete system for the purification of water waste is presented.Three main concerns are addressed:the nature of the absorbing material,the efficiency dependence on sca...A detailed study regarding the optimization of a complete system for the purification of water waste is presented.Three main concerns are addressed:the nature of the absorbing material,the efficiency dependence on scale and the management of the final waste of the assembly.These three points have to be optimized in the best acceptable way from an environmental point of view.Subsequently,the wet filling material,comprised of the absorbent and the absorbed dye,was buried in dry soil,promoting soil bacterial and fungal growth.The absorbance of CO2 was determined.The use of natural vegetative material as absorbents of chemical dyes in industrial water waste is an environmentally friendly solution.Combination with the utilization of the final solid waste as fertilizer is an optimum solution,promoting sustainability within an industrial ecology framework.The adsorption column scale-up studied herein,for the removal of basic dyes from wastewaters,using methylene blue as a representative adsorbate and barley straw as a representative waste biomass adsorbent,was successful,as regards consistency and reliability(judged by low absolute and relative standard deviation)of results.展开更多
A full-scale plant using anaerobic, anoxic and oxic processes （A1/A2/O）, along with a pilot-scale membrane bioreactor （MBR）, nanofiltration （NF） and reverse osmosis （RO） integrated system developed by Shanghai...A full-scale plant using anaerobic, anoxic and oxic processes （A1/A2/O）, along with a pilot-scale membrane bioreactor （MBR）, nanofiltration （NF） and reverse osmosis （RO） integrated system developed by Shanghai Baosteel Chemical Co. Ltd., was investigated to treat coking wastewater for industrial reuse over a period of one year. The removals reached 82.5% （COD）, 89.6% （BOD）, 99.8% （ammonium nitrogen）, 99.9% （phenol）, 44.6% （total cyanide （T-CN））, 99.7% （thiocyanide （SCN-）） and 8.9% （fluoride）, during the A1/A2/O biological treatment stage, and all parameters were further reduced by over 96.0%, except for fluoride （86.4%）, in the final discharge effluent from the currently operating plant. The pilot-scale MBR process reduced the turbidity to less than 0.65 NTU, and most of the toxic organic compounds were degraded or intercepted by the A1/A2/O followed MBR processes. In addition, parameters including COD, T-CN, total nitrogen, fluoride, chloride ion, hardness and conductivity were significantly reduced by the NF-RO system to a level suitable for industrial reuse, with a total water production ratio of 70.7%. However, the concentrates from the NF and RO units were highly polluted and should be disposed of properly or further treated before being discharged.展开更多
文摘Nowadays, with regard to environmental issues, proper operation of wastewater treatment plants is of particular importance that in the case of inappropriate utilization, they will cause serious problems. Processes that exist in environmental systems and environmental engineers are dealing with them mostly have two major characteristics: they are dependent on many variables;and there are complex relationships between its components which make them very difficult to analyze. Being familiar with characteristics of industrial town effluents from various wastewater treatment units, which have high qualitative and quantitative variations and more uncertainties compared to urban wastewaters, plays very effective role in governing them. In order to achieve a better and efficient control over the operation of an industrial wastewater treatment plant, powerful mathematical tool can be used that is based on recorded data from some basic parameters of wastewater during a period of treatment plant operation. In this study, the multilayer perceptron (MLP) feed forward neural network with a hidden layer and stop training method was used to predict quality parameters of the industrial effluent. Data of this study are related to the Fajr Industrial Wastewater Treatment Plant located in Mahshahr—Iran that qualitative and quantitative characteristics of its units were used for training, calibration and evaluation of the neural model. Also, Principal Component Analysis technique was applied to modify and improve performance of generated models of neural networks. The results of this model showed good accuracy of the model in estimating qualitative pro- file of wastewater. This model facilitates evaluating the performance of each treatment plant units through comparing the results of prediction model with the standard amount of output.
文摘The paper described the coking plant and Lurgi gasifier plant waste water types and characteristics , comparing the COD and ammonia-N level in different source of waste water in the plant.The currently maturity coking plant waste water treatment method was statement in the paper and analyzed the pros and cons of each method.The primary cost analysis of each type of waste water treatment was also completed in the paper.According to these analyses , recommendation was prepared for coking plant and Lurgi gasifier plant waste water treatment.
文摘A detailed study regarding the optimization of a complete system for the purification of water waste is presented.Three main concerns are addressed:the nature of the absorbing material,the efficiency dependence on scale and the management of the final waste of the assembly.These three points have to be optimized in the best acceptable way from an environmental point of view.Subsequently,the wet filling material,comprised of the absorbent and the absorbed dye,was buried in dry soil,promoting soil bacterial and fungal growth.The absorbance of CO2 was determined.The use of natural vegetative material as absorbents of chemical dyes in industrial water waste is an environmentally friendly solution.Combination with the utilization of the final solid waste as fertilizer is an optimum solution,promoting sustainability within an industrial ecology framework.The adsorption column scale-up studied herein,for the removal of basic dyes from wastewaters,using methylene blue as a representative adsorbate and barley straw as a representative waste biomass adsorbent,was successful,as regards consistency and reliability(judged by low absolute and relative standard deviation)of results.
文摘A full-scale plant using anaerobic, anoxic and oxic processes （A1/A2/O）, along with a pilot-scale membrane bioreactor （MBR）, nanofiltration （NF） and reverse osmosis （RO） integrated system developed by Shanghai Baosteel Chemical Co. Ltd., was investigated to treat coking wastewater for industrial reuse over a period of one year. The removals reached 82.5% （COD）, 89.6% （BOD）, 99.8% （ammonium nitrogen）, 99.9% （phenol）, 44.6% （total cyanide （T-CN））, 99.7% （thiocyanide （SCN-）） and 8.9% （fluoride）, during the A1/A2/O biological treatment stage, and all parameters were further reduced by over 96.0%, except for fluoride （86.4%）, in the final discharge effluent from the currently operating plant. The pilot-scale MBR process reduced the turbidity to less than 0.65 NTU, and most of the toxic organic compounds were degraded or intercepted by the A1/A2/O followed MBR processes. In addition, parameters including COD, T-CN, total nitrogen, fluoride, chloride ion, hardness and conductivity were significantly reduced by the NF-RO system to a level suitable for industrial reuse, with a total water production ratio of 70.7%. However, the concentrates from the NF and RO units were highly polluted and should be disposed of properly or further treated before being discharged.
