High manganese steel has wide prospects in industry due to their excellent mechanical and damping properties. The quenching structures of high manganese steel are ε-martensite, γ-austenite and α'-martensite. Re...High manganese steel has wide prospects in industry due to their excellent mechanical and damping properties. The quenching structures of high manganese steel are ε-martensite, γ-austenite and α'-martensite. Researches show that the damping properties of high manganese steel are related to these microstructures. Besides, there are many ways to improve the damping property of damping alloys. This paper reviews the damping mechanism and the influences of the ad-dition of alloying elements, heat treatment, pre-deformation and other factors on their damping performance, hoping to provide methods and ideas for the study of damping properties of high manganese steel. .展开更多
Manuscript received 30 July 1999 Abstract The shielded metal arc welding (SMAW) of a manganese steel part as a crossing of railway track to a carbon steel part as the rails of the railroad is the welding of dissimil...Manuscript received 30 July 1999 Abstract The shielded metal arc welding (SMAW) of a manganese steel part as a crossing of railway track to a carbon steel part as the rails of the railroad is the welding of dissimilar steel. It are was known that it is not possible to the the rail of railroad directly to the cross- ing of railway track made from a steel containing about 14% of manganese (wt. ) because of so many differences between the two kinds of steels such as composition, microstructure,mechanical properties and weldability.A method was used to solve the problem by presetting an intermediate layer on each side of the joint and other special procedures were used.The result of test indicated that a good weld joint was obtained.展开更多
An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding （FBW） of frog highmanganese steel. The in...An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding （FBW） of frog highmanganese steel. The influence of temperature dependent material properties and the contact resistance were taken into account in FEM ＇simulation. Meanwhile, the lost materials due to .splutter was resolved by using birth and death element. The result of analyzing data shows that the moddel in the FBW flashing is reasonable and feasible, and can exactly simulate the temperature field distribution. The modeling provides reference for analysis of welding technologies on the temperature field of high-manganese steel in FBW.展开更多
The impact corrosion-abrasion properties and mechanism of high manganese steel were investigated under different impact energies. The result shows that the wearability of the steel decreases with the increase of the i...The impact corrosion-abrasion properties and mechanism of high manganese steel were investigated under different impact energies. The result shows that the wearability of the steel decreases with the increase of the impact energy. The dominant failure mechanism at a lower impact energy is the rupture of extrusion edge along root and a slight shallow-layer spalling. It transforms to shallow-layer fatigue flaking along with serious corrosion-abrasion when the impact energy is increased, and finally changes to bulk flaking of hardened laver caused by deeo work-hardening and heaw corrosion-abrasion.展开更多
The effect of RE-modifier on the microstructure and mechanical properties of high carbon-medium manganese steel has been investigated in present work.The results showed that the RE-modifier can refine the crystalline ...The effect of RE-modifier on the microstructure and mechanical properties of high carbon-medium manganese steel has been investigated in present work.The results showed that the RE-modifier can refine the crystalline grain of high-carbon medium-manganese steel.The shape and distribution of carbides are improved and the columnar grains and phosphide in grain boundary are eliminated.Consequently,the impact toughness of the steel is increased by more than one time,compared with no addition of RE-modifier.展开更多
The hot deformation behavior and microstructure evolution of high manganese transformation induced plasticity steel(Fe - 20Mn - 3Si - 3Al) were investigated by using hot compression test in a temperature range from 80...The hot deformation behavior and microstructure evolution of high manganese transformation induced plasticity steel(Fe - 20Mn - 3Si - 3Al) were investigated by using hot compression test in a temperature range from 800℃to 1 050℃and strain rate ranging from 0.01 s^(-1) to 5.0 s^(-1).The effects of temperature,strain rate,and true strain on the flow behavior and microstructures of high manganese transformation induced plasticity steel were discussed.The results show that the dynamic recrystallization occurs only at higher temperature and lower strain rate.Hot deformation behaviors of high manganese transformation induced plasticity steel were sensitive to temperature and strain rate.The apparent stress exponent and the apparent activation energy of the investigated steel were about 4.280 and 463.791 kJ/mol, respectively.The apparent activation energy of the high manganese transformation induced plasticity steel was approached to the austenitic stainless steel(400 -500 kJ/mol).The hot working equation is obtained. Hot deformation peak stress increased with increasing of the value of lnZ.Peak stress and InZ exhibits a linear variation,the linear correlation coefficient was 0.988 9.The results show that the dynamic recrystallization was prone to occur when lnZ≤43.842 26 and Z≤1.098×10^(19),and better hot deformation properties would be obtained under this condition.展开更多
The surface effect induced transformation texture during vacuum annealing of cold-rolled high manganese transformation-induced plasticity(TRIP)steels was studied.Due to Mn removal occurring at the surface layer,γ→δ...The surface effect induced transformation texture during vacuum annealing of cold-rolled high manganese transformation-induced plasticity(TRIP)steels was studied.Due to Mn removal occurring at the surface layer,γ→δdiffusional phase transformation leads to the formation of hard pancake-shaped ferrite grains due to solution strengthening at the surface and the centre layer remains as austenite+martensite after annealing.In the case of slow heating,{112}/{111}<110>textures for the surface ferrite were strengthened with the increase in temperature and holding time,indicating an inheritance of rolling textures.By increasing the heating rate of annealing,the rotated cube texture was developed in surface ferrite.This kind of multiphase sandwich structure with hard ferrite surface layer and tough austenite dominant centre can increase tensile strength and should also improve deep drawing properties,therefore providing new possibility of controlling properties for the application of high manganese TRIP steel.展开更多
Texture evolution of high-manganese twining-induced plasticity (TWIP) steels (Fe-16Mn-0.6C) during cold-rolling is studied by means of quantitative orientation distribution function (ODF)analysis.Thickness reductions ...Texture evolution of high-manganese twining-induced plasticity (TWIP) steels (Fe-16Mn-0.6C) during cold-rolling is studied by means of quantitative orientation distribution function (ODF)analysis.Thickness reductions of the specimens during cold-rolling are 10%,20%,30%,50% and 65%,respectively.Evolution of texture is of the Brass type,which is typical for low-stacking fault energy (SFE) materials.The contribution of deformation twinning to the development of texture is clearly illustrated by the monotonic increase of the twinned Cu component.In the present study,the deformation twinning was identified as significantly contributing to deformation up to the maximum reduction applied.These results are useful for the prediction and control of the texture in TWIP steels.展开更多
文摘High manganese steel has wide prospects in industry due to their excellent mechanical and damping properties. The quenching structures of high manganese steel are ε-martensite, γ-austenite and α'-martensite. Researches show that the damping properties of high manganese steel are related to these microstructures. Besides, there are many ways to improve the damping property of damping alloys. This paper reviews the damping mechanism and the influences of the ad-dition of alloying elements, heat treatment, pre-deformation and other factors on their damping performance, hoping to provide methods and ideas for the study of damping properties of high manganese steel. .
文摘Manuscript received 30 July 1999 Abstract The shielded metal arc welding (SMAW) of a manganese steel part as a crossing of railway track to a carbon steel part as the rails of the railroad is the welding of dissimilar steel. It are was known that it is not possible to the the rail of railroad directly to the cross- ing of railway track made from a steel containing about 14% of manganese (wt. ) because of so many differences between the two kinds of steels such as composition, microstructure,mechanical properties and weldability.A method was used to solve the problem by presetting an intermediate layer on each side of the joint and other special procedures were used.The result of test indicated that a good weld joint was obtained.
文摘An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding （FBW） of frog highmanganese steel. The influence of temperature dependent material properties and the contact resistance were taken into account in FEM ＇simulation. Meanwhile, the lost materials due to .splutter was resolved by using birth and death element. The result of analyzing data shows that the moddel in the FBW flashing is reasonable and feasible, and can exactly simulate the temperature field distribution. The modeling provides reference for analysis of welding technologies on the temperature field of high-manganese steel in FBW.
基金the Doctoral Authorization Point Foundation of Education Ministry of China(No.20040359004)the Major Project Foundation of Education Office of Anhui Province(No.KJ2007A060)
文摘The impact corrosion-abrasion properties and mechanism of high manganese steel were investigated under different impact energies. The result shows that the wearability of the steel decreases with the increase of the impact energy. The dominant failure mechanism at a lower impact energy is the rupture of extrusion edge along root and a slight shallow-layer spalling. It transforms to shallow-layer fatigue flaking along with serious corrosion-abrasion when the impact energy is increased, and finally changes to bulk flaking of hardened laver caused by deeo work-hardening and heaw corrosion-abrasion.
文摘The effect of RE-modifier on the microstructure and mechanical properties of high carbon-medium manganese steel has been investigated in present work.The results showed that the RE-modifier can refine the crystalline grain of high-carbon medium-manganese steel.The shape and distribution of carbides are improved and the columnar grains and phosphide in grain boundary are eliminated.Consequently,the impact toughness of the steel is increased by more than one time,compared with no addition of RE-modifier.
文摘The hot deformation behavior and microstructure evolution of high manganese transformation induced plasticity steel(Fe - 20Mn - 3Si - 3Al) were investigated by using hot compression test in a temperature range from 800℃to 1 050℃and strain rate ranging from 0.01 s^(-1) to 5.0 s^(-1).The effects of temperature,strain rate,and true strain on the flow behavior and microstructures of high manganese transformation induced plasticity steel were discussed.The results show that the dynamic recrystallization occurs only at higher temperature and lower strain rate.Hot deformation behaviors of high manganese transformation induced plasticity steel were sensitive to temperature and strain rate.The apparent stress exponent and the apparent activation energy of the investigated steel were about 4.280 and 463.791 kJ/mol, respectively.The apparent activation energy of the high manganese transformation induced plasticity steel was approached to the austenitic stainless steel(400 -500 kJ/mol).The hot working equation is obtained. Hot deformation peak stress increased with increasing of the value of lnZ.Peak stress and InZ exhibits a linear variation,the linear correlation coefficient was 0.988 9.The results show that the dynamic recrystallization was prone to occur when lnZ≤43.842 26 and Z≤1.098×10^(19),and better hot deformation properties would be obtained under this condition.
基金supported by the National Natural Science Foundation of China(Grant No.51771024).
文摘The surface effect induced transformation texture during vacuum annealing of cold-rolled high manganese transformation-induced plasticity(TRIP)steels was studied.Due to Mn removal occurring at the surface layer,γ→δdiffusional phase transformation leads to the formation of hard pancake-shaped ferrite grains due to solution strengthening at the surface and the centre layer remains as austenite+martensite after annealing.In the case of slow heating,{112}/{111}<110>textures for the surface ferrite were strengthened with the increase in temperature and holding time,indicating an inheritance of rolling textures.By increasing the heating rate of annealing,the rotated cube texture was developed in surface ferrite.This kind of multiphase sandwich structure with hard ferrite surface layer and tough austenite dominant centre can increase tensile strength and should also improve deep drawing properties,therefore providing new possibility of controlling properties for the application of high manganese TRIP steel.
文摘Texture evolution of high-manganese twining-induced plasticity (TWIP) steels (Fe-16Mn-0.6C) during cold-rolling is studied by means of quantitative orientation distribution function (ODF)analysis.Thickness reductions of the specimens during cold-rolling are 10%,20%,30%,50% and 65%,respectively.Evolution of texture is of the Brass type,which is typical for low-stacking fault energy (SFE) materials.The contribution of deformation twinning to the development of texture is clearly illustrated by the monotonic increase of the twinned Cu component.In the present study,the deformation twinning was identified as significantly contributing to deformation up to the maximum reduction applied.These results are useful for the prediction and control of the texture in TWIP steels.
