Effect of Cold-Water Irrigation on Grain Quality Traits in japonica Rice Varieties from Yunnan Province,China

The response of grain quality traits to cold-water irrigation and its correlation with cold tolerance were studied in 11 japonica rice varieties from Yunnan Province, China. The results indicated that the response of grain quality traits to the cold-water stress varied with rice varieties and grain quality traits. Under the cold-water stress, grain width, chalky rice rate, whiteness, 1000-grain weight, brown rice rate, taste meter value, peak viscosity, trough viscosity, breakdown viscosity and final viscosity significantly decreased, whereas grain length-width ratio, head rice rate, alkali digestion value, protein content and setback viscosity markedly increased. However, the other traits such as grain length, amylose content, milled rice rate, peak viscosity time and pasting temperature were not significantly affected by the cold-water stress. Significant correlations were discovered between phenotypic acceptability and cold response indices of taste meter value, protein content, peak viscosity and breakdown viscosity. Therefore, it would be very important to improve the cold tolerance of Yunnan rice varieties in order to stabilize and improve their eating quality.

Effects of wave-current interaction on the waves, cold-water mass and transport of diluted water in the Beibu Gulf

Wave-current interaction and its effects on the hydrodynamic environment in the Beibu Gulf(BG) have been investigated via employing the Coupled Ocean–Atmosphere–Wave–Sediment Transport(COAWST) modeling system. The model could simulate reasonable hydrodynamics in the BG when validated by various observations.Vigorous tidal currents refract the waves efficiently and make the seas off the west coast of Hainan Island be the hot spot where currents modulate the significant wave height dramatically. During summer, wave-enhanced bottom stress could weaken the near-shore component of the gulf-scale cyclonic-circulation in the BG remarkably, inducing two major corresponding adjustments: Model results reveal that the deep-layer cold water from the southern BG makes critical contribution to maintaining the cold-water mass in the northern BG Basin.However, the weakened background circulation leads to less cold water transported from the southern gulf to the northern gulf, which finally triggers a 0.2℃ warming in the cold-water mass area;In the top areas of the BG, the suppressed background circulation reduces the transport of the diluted water to the central gulf. Therefore, more freshwater could be trapped locally, which then triggers lower sea surface salinity(SSS) in the near-field and higher SSS in the far-field.

Overview of milling techniques for improving the solubility of poorly water-soluble drugs

Milling involves the application of mechanical energy to physically break down coarse particles to finer ones and is regarded as a“topedown”approach in the production of fine particles.Fine drug particulates are especially desired in formulations designed for parenteral,respiratory and transdermal use.Most drugs after crystallization may have to be comminuted and this physical transformation is required to various extents,often to enhance processability or solubility especially for drugs with limited aqueous solubility.The mechanisms by which milling enhances drug dissolution and solubility include alterations in the size,specific surface area and shape of the drug particles as well as millinginduced amorphization and/or structural disordering of the drug crystal(mechanochemical activation).Technology advancements in milling now enable the production of drug micro-and nano-particles on a commercial scale with relative ease.This review will provide a background on milling followed by the introduction of common milling techniques employed for the micronization and nanonization of drugs.Salient information contained in the cited examples are further extracted and summarized for ease of reference by researchers keen on employing these techniques for drug solubility and bioavailability enhancement.

Carbamazepine solubility enhancement in tandem with swellable polymer osmotic pump tablet: A promising approach for extended delivery of poorly water-soluble drugs

Elementary osmotic pump(EOP)is a unique extended release(ER)drug delivery system based on the principle of osmosis.It has the ability to minimize the amount of the drug,accumulation and fluctuation in drug level during chronic uses.Carbamazepine(CBZ),a poorly water-soluble antiepileptic drug,has serious side effects on overdoses and chronic uses.The aim of the present study was to design a new EOP tablet of CBZ containing a solubility enhancers and swellable polymer to reduce its side effects and enhance the patient compliance.Firstly,a combination of solubilizing carriers was selected to improve the dissolution of the slightly soluble drug.Then,designing the new EOP tablet and investigating the effect of different variables of core and coat formulations on drug release behavior by single parameter optimization and by Taguchi orthogonal design with analysis of variance(ANOVA),respectively.The results showed that CBZ solubility was successfully enhanced by a minimum amount of combined polyvinyl pyrrolidone(PVP K30)and sodium lauryl sulfate(SLS).The plasticizer amount and molecular weight(MW)together with the osmotic agent amount directly affect the release rate whereas the swellable polymer amount and viscosity together with the semi-permeable membrane(SPM)thickness inversely influence the release rate.In addition,the tendency of following zero order kinetics was mainly affected by the coat components rather than those of the core.Further,orifice size does not have any significant effect on the release behavior within the range of 0.1 mm to 0.8 mm.In this study we report the successful formulation of CBZ-EOP tablets,which were similar to the marketed product Tegretol CR 200 and able to satisfy the USP criterion limits and to deliver about 80%of CBZ at a rate of approximately zero order for up to 12 h.

Simulation of global ocean acidification and chemical habitats of shallow-and cold-water coral reefs

Using the UVic Earth System Model, this study simulated the change of seawater chemistry and analyzed the chemical habitat surrounding shallow- and cold-water coral reefs from the year 1800 to 2300 employing RCP2.6, RCP4.5, RCP6.0, and RCP8.5 scenarios. The model results showed that the global ocean will continue to absorb atmospheric CO2. Global mean surface ocean temperature will rise 1.1-2.8 K at the end of the 21st century across RCP scenarios. Meanwhile, the global mean surface ocean pH will drop 0.14--0.42 and the ocean surface mean con- centration of carbonate will decrease 20%--51% across the RCP scenarios. The saturated state of sea water with respect to calcite carbonate minerals （t2） will decrease rapidly. During the pre-industrial period, 99% of the shallow-water coral reefs were surrounded by seawater with t2 〉 3.5 and 87% of the deep-sea coral reefs were surrounded by seawater with aragonite supersaturation. Within the 21st century, except for the high mitigation scenario of RCP2.6, almost none shallow-water coral reefs will be surrounded by seawater with g2 〉 3.5. Under the intensive emission scenario of RCP8.5, by the year 2100, the aragonite saturation horizon will rise to 308 m under the sea surface from 1138 m at the pre- industrial period, thus 73% of the cold-water coral reefs will be surrounded by seawater with aragonite undersaturation. By the year 2300, only 5% of the cold-water coral reefs will be surrounded by seawater with aragonite supersaturation.

STUDY ON THE MUTUAL SOLUBILITY OF WATER GLASS AND WATER SOLUBLE ORGANIC BINDER

The careful studies have been made into the mutual solubility of water glass and water soluble organic binder in this paper, By means of many experiments, it has been found that water soluble polymer is able to be evenly soluble in water glass, and certain valuable conclusions have been concluded.

Theoretical analysis of hydrogen solubility in direct coal liquefaction solvents

The cyclic hydrogenation technology in a direct coal liquefaction process relies on the dissolved hydrogen of the solvent or oil participating in the hydrogenation reaction.Thus,a theoretical basis for process optimization and reactor design can be established by analyzing the solubility of hydrogen in liquefaction solvents.Experimental studies of hydrogen solubility in liquefaction solvents are challenging due to harsh reaction conditions and complex solvent compositions.In this study,the composition and content of liquefied solvents were analyzed.As model compounds,hexadecane,toluene,naphthalene,tetrahydronaphthalene,and phenanthrene were chosen to represent the liquefied solvents in chain alkanes and monocyclic,bicyclic,and tricyclic aromatic hydrocarbons.The solubility of hydrogen X(mol/mol)in pure solvent components and mixed solvents(alkanes and aromatics mixed in proportion to the chain alkanes+bicyclic aromatic hydrocarbons,bicyclic saturated aromatic hydrocarbons+bicyclic aromatic hydrocarbons,and bicyclic aromatic hydrocarbons+compounds containing het-eroatoms composed of mixed components)are determined using Aspen simulation at temperature and pressure conditions of 373–523 K and 2–10 MPa.The results demonstrated that at high temperatures and pressures,the solubility of hydrogen in the solvent increases with the increase in temperature and pressure,with the pressure having a greater impact.Further-more,the results revealed that hydrogen is more soluble in straight-chain alkanes than in other solvents,and the solubility of eicosanoids reaches a maximum of 0.296.The hydrogen solubility in aromatic ring compounds decreased gradually with an increase in the aromatic ring number.The influence of chain alkanes on the solubility of hydrogen predominates in a mixture of solvents with different mixing ratios of chain alkanes and aromatic hydrocarbons.The solubility of hydrogen in mixed aromatic solvents is less than that in the corresponding single solvents.Hydrogen is less soluble in solvent compounds containing heteroatoms than in compounds without heteroatoms.

Simulation calculation of solubility of insoluble compound M_mA_a in complex system

A simulation calculation model for the solubility of insoluble compound MmAa in complex system was established.According to coordination equilibrium principle,relevant dissociation reaction,complexation reaction,self-complexation reaction and protonation reaction during insoluble compound dissolving were considered and then the mass balance equations about solubility calculation were obtained.In the case analysis,the solubility of silver chloride in ammonia system was obtained by simulation calculation,and curved surface charts of thermodynamic equilibrium about the total concentration of silver ions,pH and concentration of ammonia ions were drawn correspondingly.The results show that under the conditions of room temperature and 6 mol/L ammonia concentration,the calculated solubility value of silver chloride(34 g/L) is close to the actual value(31 g/L),demonstrating that this model is suitable for solubility calculation of insoluble compound MmAa in the complex system.

Experimental verification of nanonization enhanced solubility for poorly soluble optoelectronic molecules

Solubility enhancement has been a priority to overcome poor solubility with optoelectronic molecules for solution-processable devices. This study aims to obtain experimental data on the effect of particle sizes on the solubility properties of several typical optoelectronic molecules in organic solvents, including the solubility results of 1,3-bis(9-carbazolyl)benzene(m CP), 1,3,5-tris(1-phenyl-1H-benzimidazol-2-yl)ben zene(TPBi) and 2-(4-tert-butylphenyl)-5-(4-biphenyl)-1,3,4-oxadiazole(PBD) in ethanol and acetonitrile,respectively. Nanoparticles of m CP, TPBi and PBD with sizes from dozens to several hundred nanometers were prepared by solvent antisolvent precipitation method and their solubility were determined by using isothermal saturation method. The saturation solubility of nanoparticles of three kinds of optoelectronic molecules exhibited increase of 12.9%-25.7% in comparison to the same raw materials in the form of microparticles. The experimental evidence indicates that nanonization technology is a feasible way to make optoelectronic molecules dissolve in liquids with enhanced solubility.

Temperature-dependent solubility of Rebaudioside A in methanol/ethanol and ethyl acetate mixtures:Experimental measurements and thermodynamic modeling

The equilibrium solubility of Rebaudioside A(Reb A)FormⅡin binary mixtures of methanol/ethanol and ethyl acetate was quantitatively determined within the temperature range of 283.15—328.15 K at ambient pressure.The experimental findings indicate a positive correlation between the solubility of Reb A(FormⅡ)and both the temperature and the methanol/ethanol content in the solvent system.To describe the solubility data,six distinct models were employed:the modified Apelblat equation,theλh model,the combined nearly ideal binary solvent/Redlich—Kister(CNIBS/R—K)model,the van't HoffJouyban-Acree(VJA)model,the Apelblat-Jouyban-Acree(AJA)model,and the non-random two-liquid(NRTL)model.The combined nearly ideal binary solvent/Redlich—Kister model exhibited the most precise fit for solubility in methanol+ethyl acetate mixtures,reflected by an average relative deviation(ARD)of 0.0011 and a root mean square deviation(RMSD)of 12×10^(-7).Conversely,for ethanol+ethyl acetate mixtures,the modified Apelblat equation provided a superior correlation(ARD=0.0014,RMSD=4×10^(-7)).Furthermore,thermodynamic parameters associated with the dissolution of Reb A(FormⅡ),including enthalpy,entropy,and the Gibbs energy change,were inferred from the data.The findings underscore that the dissolution process is predominantly endothermic across the solvent systems examined.Notably,the entropy changes appear to have a significant influence on the Gibbs free energy associated with the dissolution of Reb A(FormⅡ),suggesting that entropic factors may play a pivotal role in the studied systems.

Tuning the solubility of polysulfides for constructing practical lithium-sulfur battery

Li-S batteries are regarded as one of the most promising candidates for next-generation battery systems with high energy density and low cost.However,the dissolution-precipitation reaction mechanism of the sulfur(S)cathode enhances the kinetics of the redox processes of the insulating sulfu r,which also arouses the notorious shuttle effect,leading to serious loss of S species and corrosion of Li anode.To get a balance between the shuttle restraining and the kinetic property,a combined strategy of electrolyte regulation and cathode modification is proposed via introducing 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoroprpyl ether(HFE)instead of 1,2-dimethoxyethane(DME),and SeS_(7)instead of S_8.The introduction of HFE tunes the solvation structure of the LiTFSI and the dissolution of intermediate polysulfides with Se doping(LiPSSes),and optimize the interface stability of the Li anode simultaneously.The minor Se substitution compensates the decrease in kinetic due to the decreased solubility of LiPSs.In this way,the Li-SeS_(7)batteries deliver a reversible capacity of 1062 and 1037 mAh g^(-1)with 2.0 and 5.5 mg SeS_(7)cm^(-2)loading condition,respectively.Besides,an electrolyte-electrode loading model is established to explain the relationship between the optimal electrolyte and cathode loading.It makes more sense to guide the electrolyte design for practical Li-S batteries.

Buxu Tongyu Granule Alleviates Myocardial Ischemia by Activating Vascular Smooth Muscle Cell Soluble Guanylate Cyclase to Inhibit Abnormal Vasomotion

Myocardial ischemia is a serious threat to human health,and vascular dysfunction is its main cause.Buxu Tongyu(BXTY)Granule is an effective traditional Chinese medicine(TCM)for treating myocardial ischemia.However,the underlying mechanism of BXTY is still unclear.In this study,we demonstrate that BXTY ameliorates myocardial ischemia by activating the soluble guanylate cyclase(sGC)-30,50-cyclic guanosine monophosphate(cGMP)-protein kinase G(PKG)signaling pathway in vascular smooth muscle cells(VSMCs)to dilate the arteries.BXTY was given by gavage for ten consecutive days before establishing an animal model of acute myocardial ischemia in mice via the intraperitoneal injection of pituitrin.The results showed that BXTY alleviated the symptoms of myocardial ischemia induced by pituitrin in mice,including electrocardiogram abnormalities and changes in plasma enzymes.In addition,BXTY dilated pre-constricted blood vessels and inhibited the vasoconstriction of the superior mesenteric artery in a dose-dependent but endothelial-independent manner.These effects were eliminated by preincubating vascular rings with the sGC inhibitors NS 2028 or ODQ,or with the PKG inhibitor KT 5823.Moreover,BXTY increased the protein expression of sGC-b1 and the intracellular second messenger cGMP level in mouse aortic vascular smooth muscle cells(MOVAs).NS 2028 or ODQ reversed these effects of BXTY.The expression level of the cGMP downstream effector protein PKG-1 increased after treating MOVAs with BXTY.NS 2028,ODQ,or KT 5823 also reversed this effect of BXTY.In conclusion,BXTY can improve the symptoms of acute myocardial ischemia in mice,and activating the sGC-cGMP-PKG pathway in VSMCs to induce vasodilation is its key pharmacodynamic mechanism.

Modeling solubility of oxaprozin and irbesartan in biorelevant complex solutions based on a combination of pH-dependent and micellar solubilization models

Biological solubility is one of the important basic parameters in the development process of poorly soluble drugs,but the current measurement methods are mainly based on a large number of experiments,which are time-consuming and cost-intensive.There is still a lack of effective theoretical models to accurately describe and predict the biological solubility of drugs to reduce costs.Therefore,in this study,osaprazole and irbesartan were selected as model drugs,and their solubility in solutions containing surfactants and biorelevant media was measured experimentally.By calculating the parameters of each component using the perturbed-chain statistical associating fluid theory(PC-SAFT)model,combined with pH-dependent and micellar solubilization models,the thermodynamic phase behavior of the two drugs was successfully modeled,and the predicted results were in good agreement with the experimental values.These results demonstrate that the model combination used provides important basic parameters and theoretical guidance for the development and screening of poorly soluble drugs and related formulations.

RETRACTED: Determination of the Mesalazine Solubility at Biorelevant Temperature

Short Retraction NoticeThis article has been retracted to straighten the academic record. In making this decision the Editorial Board follows COPE's Retraction Guidelines. The aim is to promote the circulation of scientific research by offering an ideal research publication platform with due consideration of internationally accepted standards on publication ethics. The Editorial Board would like to extend its sincere apologies for any inconvenience this retraction may have caused. The full retraction notice in PDF is preceding the original paper, which is marked "RETRACTED".

Study of the Relationship Between New Ionic Interaction Parameters and Salt Solubility in Electrolyte Solutions Based on Molecular Dynamics Simulation

Studying the relationship between ionic interactions and salt solubility in seawater has implications for seawater desalination and mineral extraction.In this paper,a new method of expressing ion-to-ion interaction is proposed by using molecular dynamics simulation,and the relationship between ion-to-ion interaction and salt solubility in a simulated seawater water-salt system is investigated.By analyzing the variation of distance and contact time between ions in an electrolyte solution,from both spatial and temporal perspectives,new parameters were proposed to describe the interaction between ions:interaction distance(ID),and interaction time ratio(ITR).The best correlation between characteristic time ratio and solubility was found for a molar ratio of salt-to-water of 10:100 with a correlation coefficient of 0.96.For the same salt,a positive correlation was found between CTR and the molar ratio of salt and water.For type 1-1,type 2-1,type 1-2,and type 2-2 salts,the correlation coefficients between CTR and solubility were 0.93,0.96,0.92,and 0.98 for a salt-to-water molar ratio of 10:100,respectively.The solubility of multiple salts was predicted by simulations and compared with experimental values,yielding an average relative deviation of 12.4%.The new ion-interaction parameters offer significant advantages in describing strongly correlated and strongly hydrated electrolyte solutions.

Soluble ST2:A Novel Biomarker for Diagnosis and Prognosis of Cardiovascular Disease

The increasing incidence of cardiovascular disease(CVD)is a significant global health concern,affecting millions of individuals each year.Accurate diagnosis of acute CVD poses a formidable challenge,as misdiagnosis can significantly decrease patient survival rates.Traditional biomarkers have played a vital role in the diagnosis and prognosis of CVDs,but they can be influenced by various factors,such as age,sex,and renal function.Soluble ST2(sST2)is a novel biomarker that is closely associated with different CVDs.Its low reference change value makes it suitable for continuous measurement,unaffected by age,kidney function,and other confounding factors,facilitating risk stratification of CVDs.Furthermore,the combination of sST2 with other biomarkers can enhance diagnostic accuracy and prognostic value.This review aims to provide a comprehensive overview of sST2,focusing on its diagnostic and prognostic value as a myocardial marker for different types of CVDs and discussing the current limitations of sST2.

Machine learning prediction of methane,ethane,and propane solubility in pure water and electrolyte solutions:Implications for stray gas migration modeling

Hydraulic fracturing is an effective technology for hydrocarbon extraction from unconventional shale and tight gas reservoirs.A potential risk of hydraulic fracturing is the upward migration of stray gas from the deep subsurface to shallow aquifers.The stray gas can dissolve in groundwater leading to chemical and biological reactions,which could negatively affect groundwater quality and contribute to atmospheric emissions.The knowledge oflight hydrocarbon solubility in the aqueous environment is essential for the numerical modelling offlow and transport in the subsurface.Herein,we compiled a database containing 2129experimental data of methane,ethane,and propane solubility in pure water and various electrolyte solutions over wide ranges of operating temperature and pressure.Two machine learning algorithms,namely regression tree(RT)and boosted regression tree(BRT)tuned with a Bayesian optimization algorithm(BO)were employed to determine the solubility of gases.The predictions were compared with the experimental data as well as four well-established thermodynamic models.Our analysis shows that the BRT-BO is sufficiently accurate,and the predicted values agree well with those obtained from the thermodynamic models.The coefficient of determination(R2)between experimental and predicted values is 0.99 and the mean squared error(MSE)is 9.97×10^(-8).The leverage statistical approach further confirmed the validity of the model developed.

Solubility determination and comparison ofβ-HMX and RDX in two binary mixed solvents(acetonitrile+water,nitric acid+water)

In order to remove hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX),the main impurity,in process of polymorphic transformation of octrahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine(HMX),the solubility ofβ-HMX and RDX in acetonitrile(ACN)+water in the temperature range of 288.15-333.15 K and in nitric acid(HNO_(3))+water in the temperature range of 298.15-333.15 K were measured by laser dynamic method.The results showed that the solubility of bothβ-HMX and RDX in binary mixed solvents increased monotonously as the temperature increase at a given solvent composition or with increasing of mole fraction of solvent(ACN and nitric acid).Solubility data were well correlated by the modified Apelblat equation,Jouyban-Acree model,Yaws equation and van't Hoff equation,and the Yaws equation achieved the best fitting results according to the relative error and the mean square error root.Furthermore,the solubility ofβ-HMX and RDX in binary mixed solvent was compared,based on the solubility difference and the solvent's own properties,the best separation degree ofβ-HMX and RDX was found when the mole fraction of nitric acid was 0.22 at room temperature,which provided data support for HMX crystallization in mixed solvent.The solubility differences between RDX andβ-HMX in mixed solvents were explained from the formation of intermolecular and intramolecular hydrogen bonds.

Machine learning methods for predicting CO_(2) solubility in hydrocarbons

The application of carbon dioxide(CO_(2)) in enhanced oil recovery(EOR) has increased significantly, in which CO_(2) solubility in oil is a key parameter in predicting CO_(2) flooding performance. Hydrocarbons are the major constituents of oil, thus the focus of this work lies in investigating the solubility of CO_(2) in hydrocarbons. However, current experimental measurements are time-consuming, and equations of state can be computationally complex. To address these challenges, we developed an artificial intelligence-based model to predict the solubility of CO_(2) in hydrocarbons under varying conditions of temperature, pressure, molecular weight, and density. Using experimental data from previous studies,we trained and predicted the solubility using four machine learning models: support vector regression(SVR), extreme gradient boosting(XGBoost), random forest(RF), and multilayer perceptron(MLP).Among four models, the XGBoost model has the best predictive performance, with an R^(2) of 0.9838.Additionally, sensitivity analysis and evaluation of the relative impacts of each input parameter indicate that the prediction of CO_(2) solubility in hydrocarbons is most sensitive to pressure. Furthermore, our trained model was compared with existing models, demonstrating higher accuracy and applicability of our model. The developed machine learning-based model provides a more efficient and accurate approach for predicting CO_(2) solubility in hydrocarbons, which may contribute to the advancement of CO_(2)-related applications in the petroleum industry.

Solubility of iron(Ⅲ) and nickel(Ⅱ) acetylacetonates in supercritical carbon dioxide

As a common precursor for supercritical CO_(2)(scCO_(2))deposition techniques,solubility data of organometallic complexes in scCO_(2)is crucial for the preparation of nanocomposites.Recently,metal acetylacetonates have shown great potential for the preparation of single-atom catalytic materials.In this study,the solubilities of iron(Ⅲ)acetylacetonate(Fe(acac)3)and nickel(Ⅱ)acetylacetonate(Ni(acac)2)were measured at the temperature from 313.15 to 333.15 K and in the pressure range of 9.5–25.2 MPa to accumulate new solubility data.Solubility was measured using a static weight loss method.The semi-empirical models proposed by Chrastil and Sung et al.were used to correlate the solubility data of Fe(acac)3 and Ni(acac)2.The equations obtained can be used to predict the solubility of the same system in the experimental range.