The determination of collapse margin ratio(CMR)of structure is influenced by many uncertain factors.Some factors that can affect the calculation of CMR,e.g.,the elongation of the structural fundamental period prior to...The determination of collapse margin ratio(CMR)of structure is influenced by many uncertain factors.Some factors that can affect the calculation of CMR,e.g.,the elongation of the structural fundamental period prior to collapse,the determination of earthquake intensity measure,the seismic hazard probability,and the difference of the spectral shapes between the median spectrum of the ground motions and the design spectrum,were discussed.Considering the elongation of the structural fundamental period,the intensity measure Sa(T1)should be replaced with *aS in the calculation of CMR for short-period and medium-period structures.The reasonable intensity measure should be determined by the correlation analysis between the earthquake intensity measure and the damage index of the structure.Otherwise,CMR should be adjusted according to the seismic hazard probability and the difference in the spectral shapes.For important long-period structures,CMR should be determined by the special site spectrum.The results indicate that both Sa(T1)and spectrum intensity(SI)could be used as intensity measures in the calculation of CMR for medium-period structures,but SI would be a better choice for long-period structures.Moreover,an adjusted CMR that reflects the actual seismic collapse safety of structures is provided.展开更多
From an analysis of the relationships of grouting coefficients under the conditions of grouting reducing subsidence, it is concluded that the reducing subsidence rate is in direct proportion to the grouting-recovery r...From an analysis of the relationships of grouting coefficients under the conditions of grouting reducing subsidence, it is concluded that the reducing subsidence rate is in direct proportion to the grouting-recovery ratio, and its proportional coefficient depends on the coefficient of reducing subsidence and collapsing coefficient.The coefficient for reducing subsidence volume φ=ΔV/V_(ash) is related to overburden lithology.The coefficient for reducing subsidence volume φ is always larger than 1.This improves the reducing subsidence rate,the grouting-recovery ratio, and the coefficient for reducing subsidence volume, which can maximize the control of surface subsidence.展开更多
基金Projects(51161120359,90915005)supported by the National Natural Science Foundation of ChinaProject(NCET-08-0096)supported by the Program for New Century Excellent Talents in University of the Ministry of China
文摘The determination of collapse margin ratio(CMR)of structure is influenced by many uncertain factors.Some factors that can affect the calculation of CMR,e.g.,the elongation of the structural fundamental period prior to collapse,the determination of earthquake intensity measure,the seismic hazard probability,and the difference of the spectral shapes between the median spectrum of the ground motions and the design spectrum,were discussed.Considering the elongation of the structural fundamental period,the intensity measure Sa(T1)should be replaced with *aS in the calculation of CMR for short-period and medium-period structures.The reasonable intensity measure should be determined by the correlation analysis between the earthquake intensity measure and the damage index of the structure.Otherwise,CMR should be adjusted according to the seismic hazard probability and the difference in the spectral shapes.For important long-period structures,CMR should be determined by the special site spectrum.The results indicate that both Sa(T1)and spectrum intensity(SI)could be used as intensity measures in the calculation of CMR for medium-period structures,but SI would be a better choice for long-period structures.Moreover,an adjusted CMR that reflects the actual seismic collapse safety of structures is provided.
基金Supported by the National Natural Science Foundation of China (50174035, 50474029)
文摘From an analysis of the relationships of grouting coefficients under the conditions of grouting reducing subsidence, it is concluded that the reducing subsidence rate is in direct proportion to the grouting-recovery ratio, and its proportional coefficient depends on the coefficient of reducing subsidence and collapsing coefficient.The coefficient for reducing subsidence volume φ=ΔV/V_(ash) is related to overburden lithology.The coefficient for reducing subsidence volume φ is always larger than 1.This improves the reducing subsidence rate,the grouting-recovery ratio, and the coefficient for reducing subsidence volume, which can maximize the control of surface subsidence.
