This paper presents the investigation of solar induced ventilation that utilizes roof solar collector and vertical stack. Three prototypes, namely A, B and C, were developed based on preliminary experimental work. The...This paper presents the investigation of solar induced ventilation that utilizes roof solar collector and vertical stack. Three prototypes, namely A, B and C, were developed based on preliminary experimental work. They were then used in simulation study with the objective of determining the prototype that was able to induce the highest mass flow rate. The validation of simulation modelling against experiment indicated a good agreement between these two results. The findings showed that prototype A induced the highest mass flow rate. However, prototype C, which had obstructions at the stack outlets, was more appropriate for application in Malaysia due to various prevailing wind directions. In addition, the findings also indicated that besides solar radiation, the mass flow rate induced by the prototypes was also influenced by the local wind direction, the inlet and outlet positions as well as the outlet design. In summary, the findings highlighted the potential application of the proposed solar induced ventilation in a hot and humid climate.展开更多
At the limited roof north-south （N-S） width of a building, for the array with multirow collectors based on no shading at winter solstice noon and sloped at latitude, this paper studied the shading and the radiant en...At the limited roof north-south （N-S） width of a building, for the array with multirow collectors based on no shading at winter solstice noon and sloped at latitude, this paper studied the shading and the radiant energy striking on solar collector array. Based on Kunming solar radiation data, the annual and monthly solar radiant energy striking on multi-array collectors was analyzed and estimated, from no shading to partial shading by adding 1-3 collector row, at the slopes of 10°, 15°, 20°, 25°, 30°, 35° and 40°, respectively. The results showed that properly increasing the row number by reducing the slope of collectors was reasonable in order to get more annual radiant energy. Adding 1 row at 10° of slope was economical for Kunming, based on the 5-row array at 25°. And adding collector row by 20% at 10° of slope could increase the radiant energy striking on the array by 19%.展开更多
A systematic experimental investigation to understand the effect of heat loss and the thermoelectric aspect ratio (cross sectional area and length) on a flat plate solar thermoelectric system performance was carried o...A systematic experimental investigation to understand the effect of heat loss and the thermoelectric aspect ratio (cross sectional area and length) on a flat plate solar thermoelectric system performance was carried out. The investigation involved a series of experiments on systems with 4 different sizes of thermoelectric generators, and it was tested in 5 different vacuum levels during the steady-state. The detailed experimental investigation provided a substantial amount of data, which revealed that the system performance of both heat and electricity power were improved when the heat lost was minimised. The system’s performance strongly depended on the aspect ratio of the thermoelectric generators. This finding might have a significant impact on the cost of the system by saving the user’s and the manufacturer’s time in examining different TEGs with different aspect ratios in order to get the optimum size optimisation of the hybrid system, as well as reduce the manufacturing cost.展开更多
文摘This paper presents the investigation of solar induced ventilation that utilizes roof solar collector and vertical stack. Three prototypes, namely A, B and C, were developed based on preliminary experimental work. They were then used in simulation study with the objective of determining the prototype that was able to induce the highest mass flow rate. The validation of simulation modelling against experiment indicated a good agreement between these two results. The findings showed that prototype A induced the highest mass flow rate. However, prototype C, which had obstructions at the stack outlets, was more appropriate for application in Malaysia due to various prevailing wind directions. In addition, the findings also indicated that besides solar radiation, the mass flow rate induced by the prototypes was also influenced by the local wind direction, the inlet and outlet positions as well as the outlet design. In summary, the findings highlighted the potential application of the proposed solar induced ventilation in a hot and humid climate.
文摘At the limited roof north-south （N-S） width of a building, for the array with multirow collectors based on no shading at winter solstice noon and sloped at latitude, this paper studied the shading and the radiant energy striking on solar collector array. Based on Kunming solar radiation data, the annual and monthly solar radiant energy striking on multi-array collectors was analyzed and estimated, from no shading to partial shading by adding 1-3 collector row, at the slopes of 10°, 15°, 20°, 25°, 30°, 35° and 40°, respectively. The results showed that properly increasing the row number by reducing the slope of collectors was reasonable in order to get more annual radiant energy. Adding 1 row at 10° of slope was economical for Kunming, based on the 5-row array at 25°. And adding collector row by 20% at 10° of slope could increase the radiant energy striking on the array by 19%.
文摘A systematic experimental investigation to understand the effect of heat loss and the thermoelectric aspect ratio (cross sectional area and length) on a flat plate solar thermoelectric system performance was carried out. The investigation involved a series of experiments on systems with 4 different sizes of thermoelectric generators, and it was tested in 5 different vacuum levels during the steady-state. The detailed experimental investigation provided a substantial amount of data, which revealed that the system performance of both heat and electricity power were improved when the heat lost was minimised. The system’s performance strongly depended on the aspect ratio of the thermoelectric generators. This finding might have a significant impact on the cost of the system by saving the user’s and the manufacturer’s time in examining different TEGs with different aspect ratios in order to get the optimum size optimisation of the hybrid system, as well as reduce the manufacturing cost.
