Colorless to black switching with high contrast ratio via the electrochemical process of a hybrid organic-inorganic perovskite

Colorless‐to‐black switching has attracted widespread attention for smart windows and multifunctional displays because they are more useful to control solar energy.However,it still remains a challenge owing to the tremendous difficulties in the design of completely reverse absorptions in transmissive and colored states.Herein,we report on an electrochemical device that can switch between colorless and black by using the electrochemical process of hybrid organic–inorganic perovskite MAPbBr_(3),which shows a high integrated contrast ratio of up to 73%from 400 to 800 nm.The perovskite solution can be used as the active layer to assemble the device,showing superior transmittance over the entire visible region in neutral states.By applying an appropriate voltage,the device undergoes reversible switching between colorless and black,which is attributed to the formation of lead and Br_(2)in the redox reaction induced by the electron transfer process in MAPbBr_(3).In addition,the contrast ratio can be modulated over the entire visible region by changing the concentration and the applied voltage.These results contribute toward gaining an insightful understanding of the electrochemical process of perovskites and greatly promoting the development of switchable devices.

The Key Technology in Optical OFDM-PON

In this paper, a novel optical access network based on orthogonal frequency division multiplexing （OFDM） is proposed. An OFDMbased passive optical network （PON） uses multicarriers to carry different information that is transmitted to different optical network units （ONUs）. In this paper, system performance is analyzed for OFDMPON with different linewidths of the lightwave source, different optical signaltonoise ratio （OSNR）, different access distances, and different modulated formats. Colorlessness in the OFDMPON is also analyzed. Finally, a 40 Gb/s baseband OFDM-PON with two carriers and achieve errorfree performance over 25 km fiber transmission is proposed.

New Measuring Method for Colorless Liquid Level Based on CLC100 Level Sensor and Powercast Wireless Sensor Kit

In this paper, a new wireless measuring method for colorless liquid level measurement was presented, based on latest CLC100 liquid level sensor and Powercast wireless sensor development kit. The wireless system is divided into two parts, level measurement and data transmission part as well as data receiving and display part. First part included the capacitive liquid level sensor CLC100 and the wireless senor board. CLC100 sensor was used for liquid level measurement. Wireless sensor kit from Powercast Corporation included one wireless sensor board, which was used for signal transmission. A built-in PIC microcontroller was embedded in the transmission module, for the purpose of processing and data transmitting. Due to CLC100 sensor’s output voltage exceeding the sensor board’s input limitation, a voltage convertor was designed to connect the sensor and the wireless sensor board. The final results were voltages corresponding to the liquid level, and were processed by an independent PIC development board, and then sent to PC’s hyper terminal via serial-port by this PIC microcontroller. Experiments showed that this wireless sensor node prototype worked well.

Fluorinated Colorless Polyimides with High Heat-resistance and Low Birefringence

The development of optical films with high transparency,high thermal resistance and low birefringence remains a challenge in the flexible display industry.In this work,we designed and synthesized a series of fluorinated colorless polyimides(CPIs)materials using 2,5-substituted m-phenylenediamine diamine monomers and 1,2,4,5-cyclohexanetetracarboxylic dianhydride(CHDA).We systematically studied the effects of fluorinated group substitutions on the thermal,mechanical,optical and dielectric properties of CPI films.The introduction of alicyclic CHDA dianhydride affords high transparency and low yellowness,while the 2,5-substituted m-phenylenediamine diamines offer the CPIs with quite low birefringence as well as high glass transition temperatures.A particular CHDA/o3FBDA film with simple chemical structure stands out,exhibiting well-balanced overall properties.

Highly Transparent and Colorless Polyimide Film with Low Dielectric Constant by Introducing Meta-substituted Structure and Trifluoromethyl Groups

An effective design strategy for preparing highly transparent polyimide film with low dielectric constant is presented.The key to the strategy is to simultaneously introduce meta-substituted structure and trifluoromethyl in polymer chains.By using this design strategy,a highly transparent polyimide film with low-k was synthesized from 3,5-diaminobenzotrifluoride(m-TFPDA)and 4,4'-(hexafluoroisopropylidene)diphthalic anhydride(6FDA)through a two-step method.The obtained m-TFPDA/6FDA(CPI)film(~30 pm)possesses high optical transparency(λ_(cutoff)=334 nm,T_(450nm)=85.26%,Haze=0.31)and is close to colorless(L^(*)=96.03,a^(*)=-0.34,b^(*)=2.12,yellow index=3.96).The intrinsic k and dielectric loss value of the film are 2.27 and 0.0013 at 10 kHz,respectively.More importantly,such low dielectric performance could remain stable up to 280℃,and the film shows a low moisture rate(~0.51%),which helps to maintain the low-k property stability in different humid environments.Meanwhile,the film also shows good thermal stability and mechanical properties,with a glass transition temperature(T_(g))of 296℃and the 5 wt%decomposition temperature(T_(d,s%))of 522℃under N_(2).The tensile strength and tensile modulus of the film are 85.1 MPa and 1.96 GPa,respectively.In addition,the film is soluble in common solvents,which allows simple solution processing and low-cost,continuous roll-to-roll processes.This design strategy is beneficial to improving the transparency,lightening yellow color,lowering the dielectric constant and meanwhile maintaining the comprehensive properties of polyimide films,which is mainly due to the introduced meta-substituted and trifluoromethyl structures effectively inhibiting the transfer of charge transfer complex(CTC)effects and increasing the free volume of film.This design strategy could also be extended to other high-performance polymer systems.

Fluorine Substitution Effect on the Material Properties in Transparent Aromatic Polyimides

The recent development of flexible display technology raised additional requirements for optical and electric properties of polyimides,accelerating the structure and property tunning of transparent polyimides.The unique electronic effect and steric hindrance effect of fluorine substitutions make fluorine-containing polyimides occupy an important position in the transparent polyimide family.In this work,a series of transparent aromatic polyimides were prepared from a fixed 4,4’-(hexafluoroisopropylidene)diphthalic anhydride(6FDA)and biphenyl diamines with different substitute groups at the 2,2’,6,6’-positions.We systematically studied the effects of pendant groups on the thermal,mechanical,optical and dielectric properties of these 6FDA-based polyimides with the aid of density function theory(DFT)calculation.In particular,we paid special attention to the simple but compact fluoro group substitution.The simple fluoro substitution brought the advantages of maintaining the linearity of the backbone and dense polymer chain packing,which would minimize the weakening of polyimides’inherent thermal,dimensional and mechanical properties.Comparing with trifluoromethyl substituted polyimides with the best optical transparency,polyimides containing fluoro substitutes exhibited slightly decreased optical transparency,but increased thermal and dimensional stability and higher mechanical strength.These results could shed light on the ultimate transparent polyimide film development toward the application in extreme working condition,e.g.,the colorless polyimide substrate film for the flexible display technology.