In this paper, it is proved that, given 3 control points A, B and C, if the camera's optical center O lies on one of the three planes perpendicular to the plane ABC and going through one of the three altitudes of the...In this paper, it is proved that, given 3 control points A, B and C, if the camera's optical center O lies on one of the three planes perpendicular to the plane ABC and going through one of the three altitudes of the triangle ABC, and additionally its projection on the plane ABC is within the circumscribed circle of the triangle, that is, O is within the so-called “danger cylinder”, then the corresponding P3P problem {O, (ABC)} must have 4 positive solutions. This result is purely geometrical, and more instructive. It can bring some new insight into a better understanding of multiple-solution problem in the PnP problem, and could be used as some theoretical guide to arrange control points in real applications.展开更多
The damping capacities of Fe-13Cr-6AI, Fe-12Cr-1Mo-6AI and Fe-12Cr-1Mn-6Al (at.%) alloys as a function of strain-amplitude tested in a given static load are characterized in the 3-point bending deformation mode. Aft...The damping capacities of Fe-13Cr-6AI, Fe-12Cr-1Mo-6AI and Fe-12Cr-1Mn-6Al (at.%) alloys as a function of strain-amplitude tested in a given static load are characterized in the 3-point bending deformation mode. After being modified, Smith-Birchak model is applied to describe the results. It is shown that the modified model agrees with the experimental data much better than the original one. Finally, the influences of stress factors on the damping capacity of the alloys are analyzed.展开更多
文摘In this paper, it is proved that, given 3 control points A, B and C, if the camera's optical center O lies on one of the three planes perpendicular to the plane ABC and going through one of the three altitudes of the triangle ABC, and additionally its projection on the plane ABC is within the circumscribed circle of the triangle, that is, O is within the so-called “danger cylinder”, then the corresponding P3P problem {O, (ABC)} must have 4 positive solutions. This result is purely geometrical, and more instructive. It can bring some new insight into a better understanding of multiple-solution problem in the PnP problem, and could be used as some theoretical guide to arrange control points in real applications.
文摘The damping capacities of Fe-13Cr-6AI, Fe-12Cr-1Mo-6AI and Fe-12Cr-1Mn-6Al (at.%) alloys as a function of strain-amplitude tested in a given static load are characterized in the 3-point bending deformation mode. After being modified, Smith-Birchak model is applied to describe the results. It is shown that the modified model agrees with the experimental data much better than the original one. Finally, the influences of stress factors on the damping capacity of the alloys are analyzed.