A HALF PLANE CRACK UNDER THREE-DIMENSIONAL COMBINED MODE IMPACT LOADING

The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear line loads is consid- ered. The analytic expression for the combined mode stress intensity factors as a function of time is obtained. The method of solution is based on the application of integral transforms and the Wiener-Hopf technique. Some features of the solutions are discussed and graphical numerical results are presented.

Representation of the ENSO Combination Mode and its Asymmetric SST Response in Different Resolutions of HadGEM3

Previous studies have revealed a combination mode （C-mode） occurring in the Indo-Pacific region, arising from nonlinear interactions between ENSO and the western Pacific warm pool annual cycle. This paper evaluates the simulation of this C-mode and its asymmetric SST response in HadGEM3 and its resolution sensitivity using three sets of simulations at horizontal resolutions of N96, N216 and N512. The results show that HadGEM3 can capture well the spatial pattern of the C-mode associated surface wind anomalies, as well as the asymmetric response of SST in the tropical Pacific, but it strongly overestimates the explained variability of the C-mode compared to the ENSO mode. The model with the three resolutions is able to reproduce the distinct spectral peaks of the C-mode at the near annual combination frequencies, but the performance in simulating the longer periods is not satisfactory, presumably due to the unrealistic simulation of the ENSO mode. Increasing the horizontal resolution can improve the consistency between atmospheric and oceanic representations of the C-mode, but not necessarily enhance the accuracy of C-mode simulation compared with observation.

A New Fracture Criterion for a Crack under Combined Mode Loading

A new fracture criterion was proposed. The physical explanation of the criterion is that crack will propagate when the minimum strain energy density in iso hoop stress curve reach a critical strength of the material considered. The resulting curve of critical fracture of mixed mode cracks shows that the present fracture is efficient and more accurate than the previous criteria.

Research on the Combination Mode of Modem Product and Industrial Design under the Green Design Background

In this paper, we conduct research on the combination mode of the modern product and the industrial design under the green design background. Our enterprises must set up the industrial design as the basis of the new mechanism, treatment of product, enterprise and market to trinity, cannot be indifferent to a certain aspect, to every aspect, to attach importance to technology, hard management talents, on the basis of industrial designers should play the role of soft energetically. Industrial design should have good adhesive property, product, enterprise and market more harmonious, more closely linked, creation of the technical performance, reasonable internal structure, a novel appearance, low production cost, a profound cultural products, for the enterprise to bring the most lucrative business profits, and make the market more prosperous more standardized. Under this background, we propose the novel combination pattern that holds special meaning.

Equivalent Response Estimation of Structural Systems Subjected to Long-Period Ground Motion

Long-period ground motion has become an important consideration because of the increasing number of large and long-period structures.Therefore,a thorough investigation on the formation and characteristics of longperiod ground motion is desirable for engineering applications.In this work,an analytical study is performed to examine the effect of several parameters and the combining mode for equivalent harmonic components on the dynamic response of systems.The results of the work show that the harmonic components in equivalent ground motion are evidently influenced by the intensity rise time,duration,phase and combining mode.Moreover,the long-period ground motions are simplified and simulated by separate harmonic components through proper combination.The findings of the work are believed to be useful in the selection of input ground motion in structural seismic analysis.

Temperature distribution of fluids in a two-section two-phase closed thermosyphon wellbore

Compared with a conventional single section two-phase closed thermosyphon （TPCT） wellbore, a two-section TPCT wellbore has better heat transfer performance, which may improve the temperature distribution of fluid in wellbores, increase the temperature of fluid in wellheads and even more effectively reduce the failure rate of conventional TPCT wellbores. Heat transfer performance of two-section TPCT wellbores is affected by working medium, combination mode and oil flow rate. Different working media are introduced into the upper and lower TPCTs, which may achieve a better match between the working medium and the temperature field in the wellbores. Interdependence exists between the combination mode and the flow rate of the oil, which affects the heat transfer performance of a two-section TPCT wellbore. The experimental results show that a two-section TPCT wellbore, with equal upper and lower TPCTs respectively filled with Freon and methanol, has the best heat transfer performance when the oil flow rate is 200 L/h.

Looking Back and Prospecting to the Project Design of the Spaceflight Launching Site in China

The development history of the project design of spaceflight launching site in China and the main forms used in these designs were introduced in this thesis, and it was pointed out that the spaceflight launch should not use only one fixed model. According to its nation condition, China should design and build the launching project facility and device which correspond to the technology development of spacecraft and carrier rocket.

THE THREE-DIMENSIONAL STRESS INTENSITY FACTOR UNDER MOVING LOADS ON THE CRACK FACES

The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body,with the crack faces subjected to a traction distribution consisting of two pairs of combined mode point loads that move in a direction perpendicular to the crack edge is considered.The analytic expression for the combined mode stress intensity factors as a function of time for any point along the crack edge is obtained.The method of solution is based on the application of integral transform together with the Wiener-Hopf technique and the Cagniard-de Hoop method. Some features of the solution are discussed and graphical results for various point load speeds are presented.

Research on organizational performance in human resource management practices

In this paper, we analyzed the status of human resource management practices in western China state-owned and state holding enterprises azld private enterprises, and found that there are differences in the nature of the business combination of different patterns of human resource management practices.

Impacts of Corporate Culture on Merger

By studying the cultural background and corporate culture in China, Japan and USA, this paper analyzes the effects of cultural background and corporation culture on the transaction cost and the efficiency of control right, thus shows that cultural backgrounds have great impact on merger. This paper further studies the choice and application of the mode of culture combination of the transnational merger.

杉木巢式交配设计生长性状的遗传分析

对７５个参试杉木亲本进行巢式交配设计，１４年生时的测定结果表明树高、胸径和材积三个性状的一般配合力及特殊配合力效应均达极显著水准，树高性状有较高的遗传力，且一般配合力效应明显地大于特殊配合力效应，胸径性状正好相反，材积几乎相等。

Generation/collection mode of SECM with combined probe

Here we report a novel generation/collection operation mode of scanning electrochemical microscopy,in which a theta micropipette was employed to support two adjacent water/1,2-dichloroethane interfaces separated by the thin central glass wall：one acts as the generator while the other as the collector.The generation current,collection current and collection efficiency were enhanced significantly when the tip approached to an insulate substrate.

Simulation Research on Fire Evacuation of Large Public Buildings Based on Building Information Modeling

Reasonable evacuation strategies are important in reducing casualties in the event of a fire.In this work,we conduct a simulation of a fire evacuation of a large public building based on the building information modeling technology to find the best evacuation strategy.We identify the tolerance limit of evacuees in case of a fire as the basis of the simulation using the fire dynamics simulator software.The following four evacuation strategies are proposed and simulated:stratified evacuation only by stairs,stratified evacuation mainly by stairs and supplemented by fire elevators,holistic evacuation only by stairs,and holistic evacuation mainly by stairs and supplemented by fire elevators.The case study of a college canteen shows that if 10%of evacuees(mainly elderly people who walk slowly and children who take up less space)are instructed to evacuate via fire elevators and the other 90%of evacuees(young men and women who move fast)use the stairs,the evacuation time can be reduced to a minimum.Some improvements in the design drawing result in the enhanced efficiency of the proposed strategy.The findings of this work are of great significance for the optimization of the structural design of large public buildings and provide some references for emergency evacuation.

Important role of the ENSO combination mode in the maintenance of the anomalous anticyclone over the western North Pacific in boreal summer

This study demonstrates the main physical mechanism for the maintenance of the western North Pacific(WNP)anomalous anticyclone(WNPAC)during the El Niño decaying summer by analyzing the respective effects of the cold sea surface temperature(SST)anomalies in the WNP,the warm SST anomalies in the Indian Ocean(IO),and the El Niño and Southern Oscillation(ENSO)combination mode.We find that the WNPAC is usually accompanied by significant cold WNP SST anomalies in the El Niño mature winter and following spring,which almost disappear in the decaying summer and cannot explain the maintenance of the WNPAC in summer.The influence of the IO warm SST anomalies on the WNPAC exhibits conspicuous decadal differences.Before the 2000 s,the IO warm SST anomalies played a role in the WNPAC maintenance through the response of the baroclinic atmospheric Kelvin wave;however,this effect cannot be evidently detected after the 2000 s.This decadal difference may be related to changes in the decaying speed of ENSO events.In contrast to El Niño events before the 2000 s,El Niño events after the 2000 s decay more rapidly,and the associated tropical central-eastern Pacific SST features a La Ni?a-like condition in the El Niño decaying summer.Concomitantly,no significant warm SST anomalies appear over the tropical Indian Ocean,exerting a weak influence on the WNPAC.Relative to the cold WNP SSTanomalies and warm IO SST anomalies,the ENSO combination mode,originating from the nonlinear interaction between ENSO and the annual cycle,has a relatively stable relationship with the WNPAC during the El Niño decaying summer,which exhibits a crucial role in the maintenance of the WNPAC.Considering the persistence of the ENSO combination mode,the WNPAC and associated climate variability during the El Niño decaying summer can be skillfully predicted at least one season in advance based on the ENSO combination mode.

APPROXIMATE SOLUTIONS FOR TRANSIENT RESPONSE OF CONSTRAINED DAMPING LAMINATED CANTILEVER PLATE

The series composed by beam mode function is used to approximate the displacement function of constrained damping of laminated cantilever plates, and the transverse deformation of the plate on which a concentrated force is acted is calculated using the principle of virtual work.By solving Lagrange＇s equation, the frequencies and model loss factors of free vibration of the plate are obtained, then the transient response of constrained damping of laminated cantilever plate is obtained, when the concentrated force is withdrawn suddenly.The theoretical calculations are compared with the experimental data, the results show：both the frequencies and the response time of theoretical calculation and its variational law with the parameters of the damping layer are identical with experimental results.Also, the response time of steel cantilever plate, unconstrained damping cantilever plate and constrained damping cantilever plate are brought into comparison, which shows that the constrained damping structure can effectively suppress the vibration.