Objective:To determine the frequency of risk factors of congestive cardiac failure in a tertiary care hospital of Peshawar.Methods:This retrospective observational study was conducted in department of Cardiology,Postg...Objective:To determine the frequency of risk factors of congestive cardiac failure in a tertiary care hospital of Peshawar.Methods:This retrospective observational study was conducted in department of Cardiology,Postgraduate Medical Institute,Lady Reading Hospital Peshawar,from March 2005 to September 2007.Relevant information regarding the risk factors of congestive cardiac failure were recorded on questionnaire prepared in accordance with the objectives of the study.Results:1 019 patients with established diagnosis of cardiac failure (based on clinical findings and relevant investigations) were included.Out of total sampling 583 (57.12%) were males and 436(42.78%) were females.The age range of the patients was from 6 years to 82 years with mean age of 48.5 years and mode of age was 45 years.The distribution of causative factors of CCF was:ischemic heart disease(IHD) 36.31%,hypertension 26.30%,dilated cardiomyopathy 10.10%,obstructve and restrictive cardiomyopathies 5.39%,valvular heart diseases(VHD) 9.32%,congenital heart disease like ventricular septal defects(VSD) 4.41%,atrial septal defects(ASD) 0.58%,atrial fibrillation (AF) 2.25%,constrictive pericardidtis 1.07%.Pericardial effusion 0.68%,chronic obstructive pulmonary disease and pulmonary hypertension 1.47%,thyrotoxicosis 0.68%,complete heart block 0.29%and paget disease in 0.09%cases.Conclusion:Ischemic heart disease,hypertension,cardiomypathies,valvular heart disease and congenital heart disease are major contributor to CCF in our patients.展开更多
This paper presents reliability and availability analyses of a model representing a system having one robot and n-redundant safety units with common-cause failures. At least k safety units must function successfully f...This paper presents reliability and availability analyses of a model representing a system having one robot and n-redundant safety units with common-cause failures. At least k safety units must function successfully for the robot system success. The robot and other failure rates and the partially failed system repair rates are assumed constant and the failed robot-safety system repair time is assumed arbitrarily distributed. Markov and supplementary variable methods were used to perform mathematical analysis of this model. Generalized expressions for state probabilities, system availabilities, reliability, mean time to failure, and variance of time to failure are developed. Plots of some resulting expressions are shown.展开更多
Many mechanical systems have the characteristics of multiple failure modes and complex failure mechanisms. On the basis of stress-strength interference(SSI) model, this paper takes the mechanical system with common ca...Many mechanical systems have the characteristics of multiple failure modes and complex failure mechanisms. On the basis of stress-strength interference(SSI) model, this paper takes the mechanical system with common cause failure(CCF) as the research object. The relationship between the stress distribution and the strength distribution is studied, and the failures of components are independent of each other under the deterministic stress. Then, the concept of conditional reliability is introduced to build the system reliability models under the action of one-stress and multi-stress for both series and parallel systems. Finally, the corresponding properties of the proposed methods are discussed to show their advantages.展开更多
Mission-critical IEC 61850 system architectures are designed to tolerate hardware failures to achieve the highest reliability performance.Hence,multi-channel systems are used in such systems within industrial faciliti...Mission-critical IEC 61850 system architectures are designed to tolerate hardware failures to achieve the highest reliability performance.Hence,multi-channel systems are used in such systems within industrial facilities to isolate machinery when there are process abnormalities.Inevitably,multi-channel systems introduce Common Cause Failure(CCF)since the subsystems can rarely be independent.This paper integrates CCF into the Markov reliability model to enhance the model flexibility to investigate synchronous generator intra-bay SCN architecture reliability performance considering the quality of repairs and CCF.The Markov process enables integration of the impact of CCF factors on system performance.The case study results indicate that CCF,coupled with imperfect repairs,significantly reduce system reliability performance.High sensitivity is observed at low levels of CCF,whereas the highest level of impact occurs when the system diagnostic coverage is 99%based on ISO 13849-1,and reduces as the diagnostic coverage level reduces.Therefore,it is concluded that the severity of CCF depends more on system diagnostic coverage level than the repair efficiency,although both factors impact the system overall performance.Hence,CCF should be con-sidered in determining the reliability performance of mission-critical communication networks in power distribution centres.展开更多
The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, en...The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, energy and aviation industries. High availability of the CNC heavy-duty lathes is demanded to guarantee the efficiency and benefit of these manufacturing industries. As one of the key subsystems of the HDHLs, the feeding control system is studied in this paper on reliability modeling and reliability analysis. The fault tree analysis(FTA) method is used for reliability modelling of the feeding control system. Considering the multiple common cause failure groups(CCFGs) existing in the system, a modified beta factor parametric model is introduced to model the common cause failure(CCF) in system. The reliability of feeding control system is then obtained and the effect of CCF on the reliability of the whole system is studied as well.展开更多
文摘Objective:To determine the frequency of risk factors of congestive cardiac failure in a tertiary care hospital of Peshawar.Methods:This retrospective observational study was conducted in department of Cardiology,Postgraduate Medical Institute,Lady Reading Hospital Peshawar,from March 2005 to September 2007.Relevant information regarding the risk factors of congestive cardiac failure were recorded on questionnaire prepared in accordance with the objectives of the study.Results:1 019 patients with established diagnosis of cardiac failure (based on clinical findings and relevant investigations) were included.Out of total sampling 583 (57.12%) were males and 436(42.78%) were females.The age range of the patients was from 6 years to 82 years with mean age of 48.5 years and mode of age was 45 years.The distribution of causative factors of CCF was:ischemic heart disease(IHD) 36.31%,hypertension 26.30%,dilated cardiomyopathy 10.10%,obstructve and restrictive cardiomyopathies 5.39%,valvular heart diseases(VHD) 9.32%,congenital heart disease like ventricular septal defects(VSD) 4.41%,atrial septal defects(ASD) 0.58%,atrial fibrillation (AF) 2.25%,constrictive pericardidtis 1.07%.Pericardial effusion 0.68%,chronic obstructive pulmonary disease and pulmonary hypertension 1.47%,thyrotoxicosis 0.68%,complete heart block 0.29%and paget disease in 0.09%cases.Conclusion:Ischemic heart disease,hypertension,cardiomypathies,valvular heart disease and congenital heart disease are major contributor to CCF in our patients.
文摘This paper presents reliability and availability analyses of a model representing a system having one robot and n-redundant safety units with common-cause failures. At least k safety units must function successfully for the robot system success. The robot and other failure rates and the partially failed system repair rates are assumed constant and the failed robot-safety system repair time is assumed arbitrarily distributed. Markov and supplementary variable methods were used to perform mathematical analysis of this model. Generalized expressions for state probabilities, system availabilities, reliability, mean time to failure, and variance of time to failure are developed. Plots of some resulting expressions are shown.
基金the National Natural Science Foundation of China(Nos.71771186 and 71471147)the 111 Project(No.B13044)the Basic Research Foundation of Northwestern Polytechnical University(No.3102014JCS05013)
文摘Many mechanical systems have the characteristics of multiple failure modes and complex failure mechanisms. On the basis of stress-strength interference(SSI) model, this paper takes the mechanical system with common cause failure(CCF) as the research object. The relationship between the stress distribution and the strength distribution is studied, and the failures of components are independent of each other under the deterministic stress. Then, the concept of conditional reliability is introduced to build the system reliability models under the action of one-stress and multi-stress for both series and parallel systems. Finally, the corresponding properties of the proposed methods are discussed to show their advantages.
文摘Mission-critical IEC 61850 system architectures are designed to tolerate hardware failures to achieve the highest reliability performance.Hence,multi-channel systems are used in such systems within industrial facilities to isolate machinery when there are process abnormalities.Inevitably,multi-channel systems introduce Common Cause Failure(CCF)since the subsystems can rarely be independent.This paper integrates CCF into the Markov reliability model to enhance the model flexibility to investigate synchronous generator intra-bay SCN architecture reliability performance considering the quality of repairs and CCF.The Markov process enables integration of the impact of CCF factors on system performance.The case study results indicate that CCF,coupled with imperfect repairs,significantly reduce system reliability performance.High sensitivity is observed at low levels of CCF,whereas the highest level of impact occurs when the system diagnostic coverage is 99%based on ISO 13849-1,and reduces as the diagnostic coverage level reduces.Therefore,it is concluded that the severity of CCF depends more on system diagnostic coverage level than the repair efficiency,although both factors impact the system overall performance.Hence,CCF should be con-sidered in determining the reliability performance of mission-critical communication networks in power distribution centres.
基金the National Science and Technology Major Project of China(No.2014ZX04014-011)
文摘The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, energy and aviation industries. High availability of the CNC heavy-duty lathes is demanded to guarantee the efficiency and benefit of these manufacturing industries. As one of the key subsystems of the HDHLs, the feeding control system is studied in this paper on reliability modeling and reliability analysis. The fault tree analysis(FTA) method is used for reliability modelling of the feeding control system. Considering the multiple common cause failure groups(CCFGs) existing in the system, a modified beta factor parametric model is introduced to model the common cause failure(CCF) in system. The reliability of feeding control system is then obtained and the effect of CCF on the reliability of the whole system is studied as well.
