The computer simulation of the communication system that combines data and power down a common twisted wire pair

A peculiarity of control network systems is the automatic implementation mode of monitoring and control, without outside intervention in a control process. This mode imposes rigid restrictions upon transmitted data. All circulating data should comply to the defined time interval in which their reliability is definite. In other word communication has to be predictable and time-constrained in order to produce control output in time. This characteristic corresponds to concept 《determinism》 that characterizes an ability of a protocol to guarantee equivalent and opportune network access with the delay not exceeding definite time interval. For development of a deterministic and noise-resistant protocol is necessary to carry out analysis of an error model obtained by the computer simulation of an electromagnetic process in conditions of variety and intensity of interference. The formalization of the error model gives computer simulation an ability to get the error sequence directly without simulation of the electromagnetic process. The results of the simulation of an error sequence can be used for the expediency analysis of a noise-resistant encoding and the analysis of an error-correcting ability.

Communication simulation of on-board diagnosis network in high-speed Maglev trains

The on-board diagnosis network is the nervous system of high-speed Maglev trains, connecting all controller sensors, and corresponding devices to realize the information acquisition and control. In order to study the on-board diagnosis network＇s security and reliability, a simulation model for the on-board diagnosis network of high-speed Maglev trains with the optimal network engineering tool （OPNET） was built to analyze the network＇s performance, such as response error and bit error rate on the network load, throughput, and node-state response. The simulation model was verified with an actual on-board diagnosis network structure. The results show that the model results obtained are in good agreement with actual system performance and can be used to achieve actual communication network optimization and control algorithms.

Dual-Channel Communication of Column Plasma Antenna Excited by a Surface Wave——Actualization and Simulation of Radiation Pattern

Along with the introduction of the concept of dual-channel communication,we utilized the finite-difference time-domain（FDTD） method to simulate and measure the radiation pattern under certain plasma densities and plasma collision frequencies.Results show that under certain settings,the radiation pattern of a plasma antenna resembles that of a metallic antenna.In contrast to a metallic antenna,a plasma antenna possesses other functionalities,such as dynamic reconfiguration and digital controllability.The data from simulation are similar to the measurement results,indicating that column plasma antenna can realize dual-channel communication.This work confirms the viability of realizing dual-channel communication by column plasma antenna,which adds a new but promising method for modern intelligent communication.

Distributed cooperative task planning algorithm for multiple satellites in delayed communication environment

Multiple earth observing satellites need to communicate with each other to observe plenty of targets on the Earth together. The factors, such as external interference, result in satellite information interaction delays, which is unable to ensure the integrity and timeliness of the information on decision making for satellites. And the optimization of the planning result is affected. Therefore, the effect of communication delay is considered during the multi-satel ite coordinating process. For this problem, firstly, a distributed cooperative optimization problem for multiple satellites in the delayed communication environment is formulized. Secondly, based on both the analysis of the temporal sequence of tasks in a single satellite and the dynamically decoupled characteristics of the multi-satellite system, the environment information of multi-satellite distributed cooperative optimization is constructed on the basis of the directed acyclic graph（DAG）. Then, both a cooperative optimization decision making framework and a model are built according to the decentralized partial observable Markov decision process（DEC-POMDP）. After that, a satellite coordinating strategy aimed at different conditions of communication delay is mainly analyzed, and a unified processing strategy on communication delay is designed. An approximate cooperative optimization algorithm based on simulated annealing is proposed. Finally, the effectiveness and robustness of the method presented in this paper are verified via the simulation.

The Fading Multipath Channel Analysis and Simulations

The multipath fading channel,models are described in this paper in order to investigate their per-formance for digrtal radio transmissions. The simulation model for such fading channels are focused on thepoints as follows: 1) Optimal signal desigu; 2) High-performance receiver design; 3) Communication systemperformance analysis; 4) Reliable high-performance equalizing schemes. Finally, the simulation program of64 QAM digital radio with an adaptive equalizer is desigued and the simulation results are presented to showsome conclusrons we have reached.