Direct Pointwise Comparison of FE Predictions to StereoDIC Measurements:Developments and Validation Using Double Edge-Notched Tensile Specimen

To compare finite element analysis(FEA)predictions and stereovision digital image correlation(StereoDIC)strain measurements at the same spatial positions throughout a region of interest,a field comparison procedure is developed.The procedure includes(a)conversion of the finite element data into a triangular mesh,(b)selection of a common coordinate system,(c)determination of the rigid body transformation to place both measurements and FEA data in the same system and(d)interpolation of the FEA nodal information to the same spatial locations as the StereoDIC measurements using barycentric coordinates.For an aluminum Al-6061 double edge notched tensile specimen,FEA results are obtained using both the von Mises isotropic yield criterion and Hill’s quadratic anisotropic yield criterion,with the unknown Hill model parameters determined using full-field specimen strain measurements for the nominally plane stress specimen.Using Hill’s quadratic anisotropic yield criterion,the point-by-point comparison of experimentally based full-field strains and stresses to finite element predictions are shown to be in excellent agreement,confirming the effectiveness of the field comparison process.

Contrast and Comparison Between the Old and New Bar Code for Commodity Management Measures

With the development of socialism market economy, the former Bar Code ForCommodity Management Measures (being called Old Measures for short hereafter) issued by the NationalBureau of Quality and Technical Supervision can not adapt to the requirement of managing for barcode for commodity. Therefore, for the purpose of standardize bar code for commodity managementstandard, ensuring its quality, speeding up the application of it in electronic business andcirculating field and accelerating the course of being a well informed country, a new Bar Code ForCommodity Management Measures (New Measures for short) has been issued by the General Administratorof Quality Supervision, Inspection and Quarantine of P.R. China (AQSIQ) on May 30th, 2005, and putinto force in October, 2005. At the same time, the Old Measures issued on July 3rd, 1998 has beenabolished.

Delay Time Measurement and Comparison of Protection Strategies with One-Link Failed Domestic Optical Fiber Networks in Taiwan

In this paper, we study the protection strategies of domestic optical fiber networks in Taiwan. Delay time experiment of two one-link failed cases are also reported and compared. We can get best protection strategy and bypass the optical transmission signal at shortest delay time.

Improving the wind and temperature measurements of an airborne meteorological measuring system

The Aircraft Integrated Meteorological Measuring System 20 Hz(AIMMS-20) has been used by the Hong Kong Observatory(HKO),China in data collection for tropical cyclone situations over the South China Sea and windshear and turbulence measurement at the Hong Kong International Airport(HKIA).This paper discusses possible methods for further enhancing the quality of the wind and temperature measurements from the system.For wind measurement,the enhancement methods include:error modelling of the accelerometer(e.g.,bias offset and cross-axis rate sensitivity),global positioning system(GPS) phase lag consideration,better representation of the inertial measurement unit(IMU) velocity based on the GPS velocities and considering their location differences,consideration of the slower update of GPS velocity,and wing flexure.For temperature measurement,the methods include the consideration of the temperature sensor response and the sensor housing response.The results of typical flights using AIMMS-20 show that the accuracy of the wind and temperature data could be improved by 20%-30%.Though the discussion in the present paper is related mainly to a specific meteorological measuring system on a particular aircraft,the techniques so employed should be a useful reference for similar systems installed on other aircraft.