Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical(GO) ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a ...Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical(GO) ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam(CSB) tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.展开更多
Similar to air reverberation chambers, non-anechoic water tanks are important acoustic measurement devices that can be used to measure the sound power radiated from complex underwater sound sources using diffusion fie...Similar to air reverberation chambers, non-anechoic water tanks are important acoustic measurement devices that can be used to measure the sound power radiated from complex underwater sound sources using diffusion field theory. However,the problem of the poor applicability of low-frequency measurements in these tanks has not yet been solved. Therefore,we propose a low-frequency acoustic measurement method based on sound-field correction(SFC) in an enclosed space that effectively solves the problem of measuring the sound power from complex sound sources below the Schroeder cutoff frequency in a non-anechoic tank. Using normal mode theory, the transfer relationship between the mean-square sound pressure in an underwater enclosed space and the free-field sound power of the sound source is established, and this is regarded as a correction term for the sound field between this enclosed space and the free field. This correction term can be obtained based on previous measurements of a known sound source. This term can then be used to correct the mean-square sound pressure excited by any sound source to be tested in this enclosed space and equivalently obtain its free-field sound power. Experiments were carried out in a non-anechoic water tank(9.0 m × 3.1 m × 1.7 m) to confirm the validity of the SFC method. Through measurements with a spherical sound source(whose free-field radiation characteristics are known),the correction term of the sound field between this water tank and the free field was obtained. On this basis, the sound power radiated from a cylindrical shell model under the action of mechanical excitation was measured. The measurement results were found to have a maximum deviation of 2.9 d B from the free-field results. These results show that the SFC method has good applicability in the frequency band above the first-order resonant frequency in a non-anechoic tank. This greatly expands the potential low-frequency applications of non-anechoic tanks.展开更多
Purpose A structure,used as a complex source of X-rays and neutron source,is designed with the assistance of CST module tool.Methods Particles of H-and electron,attracted from a plasma source,are designed to be separa...Purpose A structure,used as a complex source of X-rays and neutron source,is designed with the assistance of CST module tool.Methods Particles of H-and electron,attracted from a plasma source,are designed to be separated by an energy selector.Soon after the separation,the trajectory and beam quality of H-are controlled by a special designation of potential barrier and potential well.And both particles are then accelerated by three pairs of pierce similar pole to an energy of 150 keV to produce X-rays/neutron.Results With proper optimization of structure and potential combination,a binocular structure with beam center distance of 15 mm,beam diameter smaller than 3.5 mm has been devised,which gives a feasible suggestion to produce two rays with one structure in the same time.展开更多
Two Gaussian air quality dispersion models, the industrial source complex short-term model (ISCST3) with and without modification have been used to simulate the pollutant concentration distribution in urban areas base...Two Gaussian air quality dispersion models, the industrial source complex short-term model (ISCST3) with and without modification have been used to simulate the pollutant concentration distribution in urban areas based on the meteorological data and the emissions distribution of sulfur dioxide. The verified data show that the modified model is more accurate in the urban area of Shijiazhuang. Using the modified model predictions, the control strategies of sulfur dioxide in the urban area have been studied, and the result show that the second long-term (to 2010) strategy can mitigate air pollution significantly and maintain pollution levels within permissible limits.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61301056 and 61231001)the Fundamental Research Funds for the Central Universities,China(Grant No.ZYGX2014J012)+2 种基金the Fok Ying Tung Education Foundation,China(Grant No.141062)the Aero-Science Fund,China(Grant No.20142580012)the"111"Project(Grant No.B07046)
文摘Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical(GO) ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam(CSB) tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.
基金the National Natural Science Foundation of China (Grant No. 11874131)Open Fund Project of Key Laboratory of Underwater Acoustic Countermeasures Technology (Grant No. 2021-JCJQ-LB033-05)。
文摘Similar to air reverberation chambers, non-anechoic water tanks are important acoustic measurement devices that can be used to measure the sound power radiated from complex underwater sound sources using diffusion field theory. However,the problem of the poor applicability of low-frequency measurements in these tanks has not yet been solved. Therefore,we propose a low-frequency acoustic measurement method based on sound-field correction(SFC) in an enclosed space that effectively solves the problem of measuring the sound power from complex sound sources below the Schroeder cutoff frequency in a non-anechoic tank. Using normal mode theory, the transfer relationship between the mean-square sound pressure in an underwater enclosed space and the free-field sound power of the sound source is established, and this is regarded as a correction term for the sound field between this enclosed space and the free field. This correction term can be obtained based on previous measurements of a known sound source. This term can then be used to correct the mean-square sound pressure excited by any sound source to be tested in this enclosed space and equivalently obtain its free-field sound power. Experiments were carried out in a non-anechoic water tank(9.0 m × 3.1 m × 1.7 m) to confirm the validity of the SFC method. Through measurements with a spherical sound source(whose free-field radiation characteristics are known),the correction term of the sound field between this water tank and the free field was obtained. On this basis, the sound power radiated from a cylindrical shell model under the action of mechanical excitation was measured. The measurement results were found to have a maximum deviation of 2.9 d B from the free-field results. These results show that the SFC method has good applicability in the frequency band above the first-order resonant frequency in a non-anechoic tank. This greatly expands the potential low-frequency applications of non-anechoic tanks.
文摘Purpose A structure,used as a complex source of X-rays and neutron source,is designed with the assistance of CST module tool.Methods Particles of H-and electron,attracted from a plasma source,are designed to be separated by an energy selector.Soon after the separation,the trajectory and beam quality of H-are controlled by a special designation of potential barrier and potential well.And both particles are then accelerated by three pairs of pierce similar pole to an energy of 150 keV to produce X-rays/neutron.Results With proper optimization of structure and potential combination,a binocular structure with beam center distance of 15 mm,beam diameter smaller than 3.5 mm has been devised,which gives a feasible suggestion to produce two rays with one structure in the same time.
文摘Two Gaussian air quality dispersion models, the industrial source complex short-term model (ISCST3) with and without modification have been used to simulate the pollutant concentration distribution in urban areas based on the meteorological data and the emissions distribution of sulfur dioxide. The verified data show that the modified model is more accurate in the urban area of Shijiazhuang. Using the modified model predictions, the control strategies of sulfur dioxide in the urban area have been studied, and the result show that the second long-term (to 2010) strategy can mitigate air pollution significantly and maintain pollution levels within permissible limits.