Electrical structure identification of deep shale gas reservoir in complex structural area using wide field electromagnetic method

To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.

Galerkin-based quasi-smooth manifold element(QSME)method for anisotropic heat conduction problems in composites with complex geometry

The accurate and efficient analysis of anisotropic heat conduction problems in complex composites is crucial for structural design and performance evaluation. Traditional numerical methods, such as the finite element method(FEM), often face a trade-off between calculation accuracy and efficiency. In this paper, we propose a quasi-smooth manifold element(QSME) method to address this challenge, and provide the accurate and efficient analysis of two-dimensional(2D) anisotropic heat conduction problems in composites with complex geometry. The QSME approach achieves high calculation precision by a high-order local approximation that ensures the first-order derivative continuity.The results demonstrate that the QSME method is robust and stable, offering both high accuracy and efficiency in the heat conduction analysis. With the same degrees of freedom(DOFs), the QSME method can achieve at least an order of magnitude higher calculation accuracy than the traditional FEM. Additionally, under the same level of calculation error, the QSME method requires 10 times fewer DOFs than the traditional FEM. The versatility of the proposed QSME method extends beyond anisotropic heat conduction problems in complex composites. The proposed QSME method can also be applied to other problems, including fluid flows, mechanical analyses, and other multi-field coupled problems, providing accurate and efficient numerical simulations.

A flexible multiscale algorithm based on an improved smoothed particle hydrodynamics method for complex viscoelastic flows

Viscoelastic flows play an important role in numerous engineering fields,and the multiscale algorithms for simulating viscoelastic flows have received significant attention in order to deepen our understanding of the nonlinear dynamic behaviors of viscoelastic fluids.However,traditional grid-based multiscale methods are confined to simple viscoelastic flows with short relaxation time,and there is a lack of uniform multiscale scheme available for coupling different solvers in the simulations of viscoelastic fluids.In this paper,a universal multiscale method coupling an improved smoothed particle hydrodynamics(SPH)and multiscale universal interface(MUI)library is presented for viscoelastic flows.The proposed multiscale method builds on an improved SPH method and leverages the MUI library to facilitate the exchange of information among different solvers in the overlapping domain.We test the capability and flexibility of the presented multiscale method to deal with complex viscoelastic flows by solving different multiscale problems of viscoelastic flows.In the first example,the simulation of a viscoelastic Poiseuille flow is carried out by two coupled improved SPH methods with different spatial resolutions.The effects of exchanging different physical quantities on the numerical results in both the upper and lower domains are also investigated as well as the absolute errors in the overlapping domain.In the second example,the complex Wannier flow with different Weissenberg numbers is further simulated by two improved SPH methods and coupling the improved SPH method and the dissipative particle dynamics(DPD)method.The numerical results show that the physical quantities for viscoelastic flows obtained by the presented multiscale method are in consistence with those obtained by a single solver in the overlapping domain.Moreover,transferring different physical quantities has an important effect on the numerical results.

Preparation and luminescence properties of europium complex with α-naphthylacetic acid incorporated in silica matrix by sol-gel method

Europium ternary complex of Eu(NNA) 3(NNA=α-naphthylacetic acid) was embedded in silica matrix at different ratios by sol-gel method. The luminescence properties of silica composites were studied by comparing them with those of corresponding pure complex by means of excitation, emission spectra and lifetimes. The fluorescence lifetime was prolonged when the pure complex was incorporated in silica matrix. The relative fluorescence intensity and fluorescence lifetimes increased simultaneously with the increase of (Eu(NNA) 3.)

Agglomerate control in the complexing sol-gel process

Nanometer ZrO2 - 8% Y2O3 (mole fraction, % ) powders were prepared by the EDTA (ethylenediaminetetraacetic acid) sol-gel process. Effects of the addition of ethylene glycol on agglomerate control was investigated. The results showed that because of the replacement of hydrogen bonds with ethylene glycol in the polymerized gel, gel stabilization and homogeneity were improved and close approach of gel particles was prevented, which led to reduction of hard agglomerates to some extent. Calcined at 4OO t for 2 h and 700 C for 2 h, the powders had a specific surface area of 35 m2/g, average particle size of 28 nm, and median particle size (d50) of 0. 44um with very sharp distribution, mostly being soft agglomerates.

Preparation of long alumina fibers by sol-gel method using malic acid

The precursor sol of alumina was prepared by sol-gel method with aluminum nitrate and malic acid as raw materials.The effects of content of malic acid and polyvinylpyrrolidone （PVP） on sol spinnability were explored.The gel fibers with above 80 cm in length were obtained by mixing aluminum nitrate,malic acid and PVP on mass ratio of 10 3 1.5.Thermogravimetry-differential scanning calorimetry （TG-DSC）,Fourier transform infrared （FTIR） spectrum,X-ray diffractometry （XRD）,and scanning electron microscopy （SEM） were used to characterize the properties of the gel and ceramic fibers.The alumina fibers with a smooth surface and about 20μm in diameter were obtained by sintering at 1 200℃,and their main phase was indentified to be α-Al2O3.

Extraction of Pumpkin Polysaccharide by Complex Enzyme Method and Its Antioxidant Research

[Objective] This paper aims to study a new method of extracting pumpkin polysaccharide from pumpkin. Single factor experiments were conducted to examine the effects of extracting time,temperature,the solid-liquid ratio and pH value on the extraction yield of polysaccharide from pumpkin. [Method] The best enzyme ratio and extraction conditions for complex enzymes extraction were determined through orthogonal tests. Scavenging ·OH and O-2 activities of pumpkin polysaccharides were also investigated by salicylic acid and improved self-oxidation of o-pheno methods respectively. [Results] The results showed that the biggest extraction yield of polysaccharide from pumpkin can be got when adding 1% cellulose enzyme,1.5% pectinase,1.0% papain and Na2HPO4-citric acid buffer solution (pH was 4.6),and oscillating for 30 min under water at 40 ℃ with the solid-liquid ratio of 1:30. In addition,pumpkin polysaccharides had a strong activity of eliminating ·OH,but very weak activity to scavenge O-2. [Conclusion] This study provided basic data for research and application of Pumpkin polysaccharide.

Synthesis of LiMnPO_4/C composite material for lithium ion batteries by sol-gel method

The LiMnPO4/C composite material was synthesized via a sol-gel method based on the citric acid. The X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical performance tests were adopted to characterize the properties of LiMnPO4/C. The XRD studies show that the pure olivine phase LiMnPO4 can be obtained at a low temperature of 500 °C. The SEM analyses illustrate that the citric acid used as the chelating reagent and carbon source can restrain the particle size of LiMnPO4/C well. The LiMnPO4/C sample synthesized at 500 °C for 10 h performs the highest initial discharge capacity of 122.6 mA-h/g, retaining 112.4 mA-h/g over 30 cycles at 0.05C rate. The citric acid based sol-gel method is favor to obtain the high electrochemical performance of LiMnPO4/C.

A Novel Approach to Synthesizing Porous ZnO Films: Inorganic Chelating Sol-Gel Method

Porous ZnO films are synthesized by inorganic chelating sol-gel method,which is a novel sol-gel technique using zinc nitrate as starting materials and citric acid as the chelating reagent.The crystal structure,surface morphology,porous and optical properties of the deposited films are investigated.X-ray diffraction pattern analysis shows that crystal structure of the ZnO films is hexagonal wurtzite.Scanning electron microscopy (SEM) shows that the ZnO film is porous.The curve of pore size distribution has two peak values at about 2.02nm and 4.97nm and BET surface area of the ZnO film is 27.57m2/g.In addition,the transmittance spectrum gives a high transmittance of 85% in the visible region and optical bandgap of the ZnO film (fired at 500℃) is 3.25eV.

Computational Complex Method for Finite Elastic Plane Problem with Multiple Elliptical Holes

把多复变量应力函数和边界配点最小二乘法相结合，计算含有任意多个椭圆孔有限大小弹性板的应力场．每个孔的大小、位置为任意．板的边界由下列四种边界条件以及它们的组合所组成：１）已知Ｐｘ和Ｐｙ的应力边界，２）已知Ｖｘ和Ｖｙ的位移边界，３）已知法向位移ＶＮ和切向力ＰＴ的混合边界，４）已知法向力ＰＮ和切向位移ＶＴ的混合边界．编制了相应的ＦＯＲＴＲＡＮ程序，进行考题和算例分析，结果表明本方法行之有效．

Species distribution of polymeric aluminium ferrum——timed complexation colorimetric analysis method of Al-Fe-Ferron

The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..

Photocatalytic Activity of Nanosized ZnWO_4 Prepared by the Sol-gel Method

Nanosized ZnWO4 photocatalysts were successfully synthesized via the sol-gel process in a temperature range of 450-800℃. The grain size, crystal size, and crystallinity of ZnWO4 particles increased with the increase of calcina- tion temperature and prolonging calcination time. The photocatalytic activity was measured for the degradation of an aqueous Rhodamine-B（RhB） solution and gaseous formaldehyde（FAD）. With the increase of calcination temperature and time, the activities increased to a maximum and then decreased. ZnWO4 photocatalyst prepared at 550℃ for I0 h showed the highest activity, which is similar to the photocatalytic activity of P25TiO2 for the degradation of gase-ous FAD. High crystallinity, large surface area, and good dispersion are responsible for the high photocatalytic per- formance of the prepared ZnWO4.

Direct Synthesis of Diphenyl Carbonate with Heterogeneous Catalyst and Optimal Synthesis Conditions of the Support Prepared by Sol-gel Method

The support of catalyst for the direct synthesis of diphenyl carbonate （DPC） by heterogeneous catalytic reaction was prepared by the sol-gel method. Compared with activated charcoal, molecular sieve, porous ceramics, hopcalite, the support prepared by the sol-gel method has higher activity. The characterization of the support by X-ray diffraction （XRD） and transmission electron microscope （TEM） show that the mare crystal phase is Co2MnO4 and the average particle diameter is about 40 nm. The optimum conditions for synthesis of the support were determined by orthogonal experiments, which indicate that the proportion of Cu, Mn, and Co is the first important factor influencing the yield and selectivity of DPC. Temperature of calcination is the second one. The optimum conditions are： molar proportion of Cu, Mn, and Co being 1 ： 1 ： 1, temperature of calcination 700℃, drying at 100~C, temperature of water bath 85~C. The yield and selectivity of DPC in the process can reach 38% and 99% in the batch operation, respectively. The copper cobalt manganese mixed oxides chosen as the support contribute more to the high catalytic activity than the sol-gel method.

A new complex variable element-free Galerkin method for two-dimensional potential problems

In this paper, based on the element-free Galerkin （EFG） method and the improved complex variable moving least- square （ICVMLS） approximation, a new meshless method, which is the improved complex variable element-free Galerkin （ICVEFG） method for two-dimensional potential problems, is presented. In the method, the integral weak form of control equations is employed, and the Lagrange multiplier is used to apply the essential boundary conditions. Then the corresponding formulas of the ICVEFG method for two-dimensional potential problems are obtained. Compared with the complex variable moving least-square （CVMLS） approximation proposed by Cheng, the functional in the ICVMLS approximation has an explicit physical meaning. Furthermore, the ICVEFG method has greater computational precision and efficiency. Three numerical examples are given to show the validity of the proposed method.

Identifying influential spreaders in complex networks based on entropy weight method and gravity law

In complex networks,identifying influential spreader is of great significance for improving the reliability of networks and ensuring the safe and effective operation of networks.Nowadays,it is widely used in power networks,aviation networks,computer networks,and social networks,and so on.Traditional centrality methods mainly include degree centrality,closeness centrality,betweenness centrality,eigenvector centrality,k-shell,etc.However,single centrality method is onesided and inaccurate,and sometimes many nodes have the same centrality value,namely the same ranking result,which makes it difficult to distinguish between nodes.According to several classical methods of identifying influential nodes,in this paper we propose a novel method that is more full-scaled and universally applicable.Taken into account in this method are several aspects of node’s properties,including local topological characteristics,central location of nodes,propagation characteristics,and properties of neighbor nodes.In view of the idea of the multi-attribute decision-making,we regard the basic centrality method as node’s attribute and use the entropy weight method to weigh different attributes,and obtain node’s combined centrality.Then,the combined centrality is applied to the gravity law to comprehensively identify influential nodes in networks.Finally,the classical susceptible-infected-recovered(SIR)model is used to simulate the epidemic spreading in six real-society networks.Our proposed method not only considers the four topological properties of nodes,but also emphasizes the influence of neighbor nodes from the aspect of gravity.It is proved that the new method can effectively overcome the disadvantages of single centrality method and increase the accuracy of identifying influential nodes,which is of great significance for monitoring and controlling the complex networks.

Preparation and properties of nanocrystal SmBO_3 by nitrate-citrate sol-gel combustion method

Nanocrystal SmBO3 powders were synthesized by nitrate-citrate sol-gel combustion method. The phase evolution, morphologies and absorbency of the synthesized powders were characterized by X-ray diffraction （XRD）, Field emission scanning electronic microscope （FESEM）, Fourier transform infrared spectroscopy （FFIR） and UV-3101PC spectrophotometer （UVPC）, respectively. XRD and FESEM results showed that pure SmBO3 phase was obtained at 750 ℃, with an average original particle size of about 100 nm. FTIR showed that there were apparently concentrated absorbent peaks between 500 and 1400 cm^-1. Moreover, the reflectivity of the powders apparently decreased at the wavelength between 1.05 and 1.15 μm. Therefore, SmBO3 might be a kind of absorbent material for infrared laser.

Preparation and Characterization of Sodium Sulfate/Silica Composite as a Shape-stabilized Phase Change Material by Sol-gel Method

A sodium sulfate （NaeSO4）/silica （SiO2） composite was prepared as a shape-stabilized solid-liquid phase change material by a sol-gel procedure using Na2SiO3 as the silica source. Na2SO4 in the composite acts as a latent heat storage substance for solid-liquid phase change, while SiO2 acts as a support material to provide structural strength and prevent leakage of melted NazSO4. The microstructure and composition of the prepared composite were characterized by the N2 adsorption, transmission electron microscope （TEM）, scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FTIR） and X-ray diffraction. The results show that the prepared Na2SOJSiO2 composite is a nanostructured hybrid of NazSO4 and SiO2 without new substances produced during the phase change. The macroscopic shape of the NazSO4/SiO2 composite after the melting and freezing cycles does not change and there is no leakage of Na2SO4. Determined by differential scanning calorimeter （DSC） analysis, the values of phase change latent heat of melting and freezing of the prepared NazSO4/SiO2 （50%, by mass） composite are 82.3 kJ.kg i and 83.7 kJ.kg-1, and temperatures of melting and freezing are 886.0 ℃ and 880.6 ℃, respectively. Furthermore, the Na2SOJSiO2 composite maintains good thermal energy storage and release ability even after 100 cycles of melting and freezing. The satisfactory thermal storage performance renders this composite a versatile tool for high-temperature thermal energy storage.

Analysis of elastoplasticity problems using an improved complex variable element-free Galerkin method

In this paper, based on the conjugate of the complex basis function, a new complex variable moving least-squares approximation is discussed. Then using the new approximation to obtain the shape function, an improved complex variable element-free Galerkin（ICVEFG） method is presented for two-dimensional（2D） elastoplasticity problems. Compared with the previous complex variable moving least-squares approximation, the new approximation has greater computational precision and efficiency. Using the penalty method to apply the essential boundary conditions, and using the constrained Galerkin weak form of 2D elastoplasticity to obtain the system equations, we obtain the corresponding formulae of the ICVEFG method for 2D elastoplasticity. Three selected numerical examples are presented using the ICVEFG method to show that the ICVEFG method has the advantages such as greater precision and computational efficiency over the conventional meshless methods.

Grain Size and Photocatalytic Activity of Nanometer TiO_2 Thin Films Prepared by the Sol-gel Method

Transparent anatase TiO2 nanometer thin films with photocatalytic activity were prepared via the sol-gel method on soda-lime glass. The thickness , crystalline phase, grain size, surface hydroxyl amount and so on were characterized by scanning electron microscopy (SEM) , X-ray diffraction (XRD), transmission electron microscopy ( TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometer ( UV-VIS). The photocatalytic activity of TiO2 thin films was evaluated for the photocatalytic decolorization of aqueous methyl orange . The effects of film thickness on the crystalline phase, grain size, transmittance and photocatalytic activity of nanometer Ti02 thin films were discussed.

A new complex variable meshless method for transient heat conduction problems

In this paper, based on the improved complex variable moving least-square （ICVMLS） approximation, a new complex variable meshless method （CVMM） for two-dimensional （2D） transient heat conduction problems is presented. The variational method is employed to obtain the discrete equations, and the essential boundary conditions are imposed by the penalty method. As the transient heat conduction problems are related to time, the Crank-Nicolson difference scheme for two-point boundary value problems is selected for the time discretization. Then the corresponding formulae of the CVMM for 2D heat conduction problems are obtained. In order to demonstrate the applicability of the proposed method, numerical examples are given to show the high convergence rate, good accuracy, and high efficiency of the CVMM presented in this paper.