This study proposed a new way to formulate a low energy super-sulfated cement (SSC) which can be used to produce self-compacting concrete (SCC) with high compressive strength and durability in terms of chloride penetr...This study proposed a new way to formulate a low energy super-sulfated cement (SSC) which can be used to produce self-compacting concrete (SCC) with high compressive strength and durability in terms of chloride penetration resistance. This innovative SSC, different from the traditional SSC, was purely produced with a ternary mixture of three industrial by-products of ground granulated blast furnace slag, low calcium Class F fly ash and circulating fluidized bed combustion (CFBC) fly ash and was denoted as SFC-SSC (super-sulfated cement made by mixture of slag, Class F fly ash and CFBC fly ash). Experimental results showed that the combination of a fixed amount of 15 wt.% of CFBC fly ash with various ratios of Class F fly ash to slag could be used to produce the hardened SCCs with high 28-day compressive strengths (41.8 - 65.6 MPa). Addition of Class F fly ash led to the resulting SCCs with lowered price and preferable engineering properties, and thus it was considered as state-of-the-art method to drive such type of concrete towards sustainable construction materials.展开更多
The mechanical performances and water retention characteristics of clays,stabilised by partial substitution of cement with by-products and inclusion of a nanotechnology-based additive called RoadCem(RC),are studied in...The mechanical performances and water retention characteristics of clays,stabilised by partial substitution of cement with by-products and inclusion of a nanotechnology-based additive called RoadCem(RC),are studied in this research.The unconfined compression tests and one-dimensional oedometer swelling were performed after 7 d of curing to understand the influence of addition of 1%of RC material in the stabilised soils with the cement partially replaced by 49%,59%and 69%of ground granulated blast furnace slag(GBBS)or pulverised fuel ash(PFA).The moisture retention capacity of the stabilised clays was also explored using the soil-water retention curve(SWRC)from the measured suctions.Results confirmed an obvious effect of the use of RC with the obtained strength and swell properties of the stabilised clays suitable for road application at 50%replacement of cement.This outcome is associated with the in-depth and penetrating hydration of the cementitious materials by the RC and water which results in the production of needle-like matrix with interlocking filaments e a phenomenon referred to as the‘wrapping’effect.On the other hand,the SWRC used to describe the water holding capacity and corresponding swell mechanism of clays stabilised by a proportion of RC showed a satisfactory response.The moisture retention of the RC-modified clays was initially higher but reduced subsequently as the saturation level increased with decreasing suction.This phenomenon confirmed that clays stabilised by including the RC are water-proof in nature,thus ensuring reduced porosity and suction even at reduced water content.Overall,the stabilised clays with the combination of cement,GGBS and RC showed a better performance compared to those with the PFA included.展开更多
The purpose of this paper was to explore the possility of using low alkalinity cementitious materials as binders,in which ground blast furnace slag and fly ash acted as a partial replacement of ordinary Portland cemen...The purpose of this paper was to explore the possility of using low alkalinity cementitious materials as binders,in which ground blast furnace slag and fly ash acted as a partial replacement of ordinary Portland cement,and CaSO_(4),Na_(2)SO_(4),and CaO were used as a sulfate activator and alkali activated additives,to solidify gold mine tail-ings for preparation of a green,inexpensive cemented paste backill(CPB).For this target,the effects of cement/tailings ratio,superplasticizer dosage,solid content,tailings fineness on the mechanical properties of the CPB were inves tigated.Additionally,the hydration mechanism of the CPB was analyzed based on X-ray diffraction and scanning electron microscopy results.The results showed that the fuidity of the CPB slurry could be improved by adding polycarboxylic acid superplasticizer.The unconfined compressive strength(UCS)of the CPB specimens was increased with the increase of cement/tailings ratio and solid content.Under the same experi-mental conditions,the 28 d UCS of the CPB specimens was 3.8-4.9 times higher than that of ordinary Portland cement.The softening coefficient of the CPB specimens was increased with the increasing cement/tailings ratio,ranging from 0.83 to 0.92.The shrinkage rate of the CPB specimens was decreased from 0.70%to 0.54%with the increase of cement/tailings ratio from 1:12 to 1:4 The UCS of the full tailings CPB was the highest,followed by the fine tailings CPB specimens,and the UCS of the coarse tailings CPB specimens was the lowest.The low alka-linity binder was proved to be a promising material to improve the engineering performances of the CPB.The optimal mixing ratio is 1:6 cement/tailings ratio,0.15 wt% superplastizer dosage,and 70 wt%solid content.Pre-pared by this mixing ratio,the UCS values of the CPB after 3,7,and 28 d curing ages reached 1.85,5.87,and 9.16 MPa,respectively,which were suitable as CPB for the Zhaoyuan gold mine in terms of strength requirements.展开更多
文摘This study proposed a new way to formulate a low energy super-sulfated cement (SSC) which can be used to produce self-compacting concrete (SCC) with high compressive strength and durability in terms of chloride penetration resistance. This innovative SSC, different from the traditional SSC, was purely produced with a ternary mixture of three industrial by-products of ground granulated blast furnace slag, low calcium Class F fly ash and circulating fluidized bed combustion (CFBC) fly ash and was denoted as SFC-SSC (super-sulfated cement made by mixture of slag, Class F fly ash and CFBC fly ash). Experimental results showed that the combination of a fixed amount of 15 wt.% of CFBC fly ash with various ratios of Class F fly ash to slag could be used to produce the hardened SCCs with high 28-day compressive strengths (41.8 - 65.6 MPa). Addition of Class F fly ash led to the resulting SCCs with lowered price and preferable engineering properties, and thus it was considered as state-of-the-art method to drive such type of concrete towards sustainable construction materials.
文摘The mechanical performances and water retention characteristics of clays,stabilised by partial substitution of cement with by-products and inclusion of a nanotechnology-based additive called RoadCem(RC),are studied in this research.The unconfined compression tests and one-dimensional oedometer swelling were performed after 7 d of curing to understand the influence of addition of 1%of RC material in the stabilised soils with the cement partially replaced by 49%,59%and 69%of ground granulated blast furnace slag(GBBS)or pulverised fuel ash(PFA).The moisture retention capacity of the stabilised clays was also explored using the soil-water retention curve(SWRC)from the measured suctions.Results confirmed an obvious effect of the use of RC with the obtained strength and swell properties of the stabilised clays suitable for road application at 50%replacement of cement.This outcome is associated with the in-depth and penetrating hydration of the cementitious materials by the RC and water which results in the production of needle-like matrix with interlocking filaments e a phenomenon referred to as the‘wrapping’effect.On the other hand,the SWRC used to describe the water holding capacity and corresponding swell mechanism of clays stabilised by a proportion of RC showed a satisfactory response.The moisture retention of the RC-modified clays was initially higher but reduced subsequently as the saturation level increased with decreasing suction.This phenomenon confirmed that clays stabilised by including the RC are water-proof in nature,thus ensuring reduced porosity and suction even at reduced water content.Overall,the stabilised clays with the combination of cement,GGBS and RC showed a better performance compared to those with the PFA included.
基金The current work was financially supported by the Key Research and Development Program of Anhui Province(202004a07020039).
文摘The purpose of this paper was to explore the possility of using low alkalinity cementitious materials as binders,in which ground blast furnace slag and fly ash acted as a partial replacement of ordinary Portland cement,and CaSO_(4),Na_(2)SO_(4),and CaO were used as a sulfate activator and alkali activated additives,to solidify gold mine tail-ings for preparation of a green,inexpensive cemented paste backill(CPB).For this target,the effects of cement/tailings ratio,superplasticizer dosage,solid content,tailings fineness on the mechanical properties of the CPB were inves tigated.Additionally,the hydration mechanism of the CPB was analyzed based on X-ray diffraction and scanning electron microscopy results.The results showed that the fuidity of the CPB slurry could be improved by adding polycarboxylic acid superplasticizer.The unconfined compressive strength(UCS)of the CPB specimens was increased with the increase of cement/tailings ratio and solid content.Under the same experi-mental conditions,the 28 d UCS of the CPB specimens was 3.8-4.9 times higher than that of ordinary Portland cement.The softening coefficient of the CPB specimens was increased with the increasing cement/tailings ratio,ranging from 0.83 to 0.92.The shrinkage rate of the CPB specimens was decreased from 0.70%to 0.54%with the increase of cement/tailings ratio from 1:12 to 1:4 The UCS of the full tailings CPB was the highest,followed by the fine tailings CPB specimens,and the UCS of the coarse tailings CPB specimens was the lowest.The low alka-linity binder was proved to be a promising material to improve the engineering performances of the CPB.The optimal mixing ratio is 1:6 cement/tailings ratio,0.15 wt% superplastizer dosage,and 70 wt%solid content.Pre-pared by this mixing ratio,the UCS values of the CPB after 3,7,and 28 d curing ages reached 1.85,5.87,and 9.16 MPa,respectively,which were suitable as CPB for the Zhaoyuan gold mine in terms of strength requirements.
