Blast wave characteristics of multi-layer composite charge:Theoretical analysis,numerical simulation,and experimental validation

This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influe nce of initiation modes on the explosive dispersion process of the multi-layer co mposite charge(MCC) was studied.Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure.The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared.The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined.The separation position of the shock wave and fireball interface was determined.The calculation formulas of the shock radius and overpressure of the composite charge are presented.The radius of the shock wave of the composite charge was significantly affected by the initiation mode.Moreover,the development process of the composite explosive fireball under different initiation modes was analyzed,the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes,the explosion energy release rate of composite charge under simultaneous initiation modes was the highest,and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.

Theoretical analysis of the double-differential cross-sections of neutron,proton,deuteron,^(3)He,andαfor the p+^(6) Li reaction

Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.

Performance Enhancement in Dye-Sensitized Solar Cells with Composite Mixtures of TiO_2 Nanoparticles and TiO_2 Nanotubes

In the present investigation,a new composite nanostructured photoanodes were prepared using TiO_2 nanotubes（TNTs） with TiO_2 nanoparticles（TNPs）.TNPs were synthesized by sol-gel method,and TNTs were prepared through alkali hydrothermal method.Dye-sensitized solar cells（DSSCs） were fabricated with different photoanodes comprising of various ratios of TNTs ＋ TNPs,synthetic indigo dye as photosensitizer,PMII（l-propyl-3-methylimidazolium iodide） as ionic liquid electrolyte and cobalt sulfide as counter electrode.The structures and morphologies of TNPs and TNTs were analyzed through X-ray diffractometer,transmission electron microscope and scanning electron microscopes.The results of the investigation showed that the DSSC-4 made with composite photoanode structure（TNTs/TNPs）（90% of TNPs ＋ 10% of TNTs） had improved photocurrent efficiency（2.11%） than pure TNPs（1.00%） and TNT film（0.78%）.Electrochemical impedance spectra revealed that the composite TNTs/TNPs film-based DSSCs possessed the lowest charge-transfer resistances and longest electron lifetime.Hence,it could be concluded that the composite TNTs/TNPs photoanode facilitates the charge transport rate and enhances the efficiencies of DSSCs.

New-type internal target for structural ion stripping

The search is now on for new materials that can be used for ionic stripping. Materials that maximize the stripping of the structural ion are important for conducting experiments with quark-gluon plasma. Although this paper is a theoretical study, it offers practical applications, in heavy-ion accelerators, of the new effect of collision multiplicity with high-energy ions interacting with polyatomic targets. It is shown that internal nanostructured targets in which the collision multiplicity effect is manifested can more efficiently strip out structural ions compared to standard internal targets for stripping. A target consisting of oriented nano-tubes with the C_（240） chirality（10,0）is considered as an example. A comparison with the stripping process on a carbon target with the same number of misaligned atoms in a unit of volume C is provided.