Experimental Study of Machinability in Millgrinding of SiCp/Al Composites

An attempt was made to investigate the machinability of Si Cp/Al composites based on the experimental study using mill-grinding processing method. The experiments were carried out on a high-speed CNC machining center using integrated abrasive cutting tool. The effects of combined machining parameters, e g, cutting speed（vs）, feed rate（vf）, and depth of cut（ap）, with the same change of material removal rate（MRR） on the mill-grinding force and surface roughness（Ra） were investigated. The formation mechanism of typical machined surface defects was analyzed by SEM. The experimental results reveal that with the same change of material removal rate, lower mill-grinding force values can be gained by increasing depth of cut and feed rate simultaneously at higher cutting speed. With the same change of MRR value, lower surface roughness values can be gained by increasing the feed rate at higher cutting speed, rather than just increasing the depth of cut, or increasing the feed rate and depth of cut simultaneously. The machined surface of Si Cp/Al composites reveals typical defects which can influence surface integrity.

Microstructure Morphologies of Asphalt Binders using Atomic Force Microscopy

We investigated microstructure morphologies of three asphalts（SK, Karamay, and Esso） used in China using atomic force microscopy（AFM）. The topography and phase contrast images were obtained. Topographic profile and three dimensional images were described. Roughnesses of microstructure were calculated. And the chemical compositions of asphalt were tested to explain the microstructural mechanism of the asphalt. The results show that the topography and phase image in atomic force microscopy are appropriate to evaluate the microstructure of the asphalt binder. There are significant differences in microstructural morphologies including bee-like structure, topographic profile, 3D image, and roughness for three asphalts in this study. There are three different phases in microstructure of asphalt binder. The oil source and chemical composition of asphalt, especially asphaltenes content have a great influence on the microstructure.

Wave force on composite bucket foundation of an offshore wind turbine

A new analytical expression for calculating the wave force on a composite bucket foundation is obtained. Based on the diffraction theory, the analytical solution of the wave pressure and the wave force on the composite bucket foundation is accurately derived by assigning reasonable boundary conditions. Experiments for the wave pressure on the bucket foundation with a scale of 1：60 under different wave conditions in the wave flume are designed and conducted. The analytical results agree well with the experimental data, and the theoretical approach can accurately predict the wave force on the large-scale structures. The wave pressure distribution on the composite bucket foundation is presented and the influence of the wave height, the water depth and the wave period on the wave force on the composite bucket foundation is investigated. This study provides a quite accurate method to calculate the wave force on a composite bucket foundation, which gives a good framework for future studies of the wave force on other large-scale structures with complex boundaries.

Grinding behavior and surface appearance of(TiC_p+ TiB_w)/Ti-6Al-4V titanium matrix composites

（TiCp＋ TiBw）/Ti-6Al-4V titanium matrix composites（PTMCs） have broad application prospects in the aviation and nuclear field. However, it is a typical difficult-to-cut material due to high hardness of the reinforcements, high strength and low thermal conductivity of Ti-6Al-4V alloy matrix. Grinding experiments with vitrified CBN wheels were conducted to analyze comparatively the grinding performance of PTMCs and Ti-6Al-4V alloy. Grinding force and force ratios, specific grinding energy, grinding temperature, surface roughness, ground surface appearance were discussed. The results show that the normal grinding force and the force ratios of PTMCs are much larger than that of Ti-6Al-4V alloy. Low depth of cut and high workpiece speed are generally beneficial to achieve the precision ground surface for PTMCs. The hard reinforcements of PTMCs are mainly removed in the ductile mode during grinding. However, the removal phenomenon of the reinforcements due to brittle fracture still exists, which contributes to the lower specific grinding energy and grinding temperature of PTMCs than Ti-6Al-4V alloy.

An Emergentist Model of Force Composition

In terms of force composition in Newtonian Mechanics,there is a threat of causal redundancy for resultant forces.The reductive model attempted to explain away this redundancy by assuming the identity between the resultant force and its component forces.In this article,however,I argue that the reductive model is problematic.After that,I develop an emergentist model which secures the distinct causal relevance of resultant forces to the effect.On the emergentist model,the resultant force causes the effect in virtue of cooperative and inhibitory interaction among component forces.In contrast with the reductive model,the emergentist model is a more plausible approach to specify force composition.