Concurrent multi-scale design optimization of composite frame structures using the Heaviside penalization of discrete material model

This paper deals with the concurrent multi-scale optimization design of frame structure composed of glass or carbon fiber reinforced polymer laminates. In the composite frame structure, the fiber winding angle at the micro-material scale and the geometrical parameter of components of the frame in the macro-structural scale are introduced as the independent variables on the two geometrical scales. Considering manufacturing requirements, discrete fiber winding angles are specified for the micro design variable. The improved Heaviside penalization discrete material optimization interpolation scheme has been applied to achieve the discrete optimization design of the fiber winding angle. An optimization model based on the minimum structural compliance and the specified fiber material volume constraint has been established. The sensitivity information about the two geometrical scales design variables are also deduced considering the characteristics of discrete fiber winding angles. The optimization results of the fiber winding angle or the macro structural topology on the two single geometrical scales, together with the concurrent two-scale optimization, is separately studied and compared in the paper. Numerical examples in the paper show that the concurrent multi-scale optimization can further explore the coupling effect between the macro-structure and micro-material of the composite to achieve an ultralight design of the composite frame structure. The novel two geometrical scales optimization model provides a new opportunity for the design of composite structure in aerospace and other industries.

Simplified Beam Design for Semi-Rigid Composite Frames at the Serviceability Limit State

This paper presents a simplified beam design method for semi-rigid composite frames with vertical loading at the serviceability limit state. Equations were developed to determine the deflections of the composite beam allowing for both joint flexibility and beam sectional properties, along with a formula for the connection secant stiffness. The equations for the connection stiffness are more accurate than previous equations used because it considers the beam-to-column stiffness ratio and the beam-to-connection stiffness ratio. The equations were validated by the experimental results for two semi-rigid composite frames. The equations agree well with the experimental data because they take into account the actual beam-to-column connections and the composite action between the steel beam and the concrete slab.

Seismic performance of composite moment-resisting frames achieved with sustainable CFST members

The main objective of the research presented in this paper is to study the bending behaviour of Concrete Filled Steel Tube （CFST） columns made with Rubberized Concrete （RuC）, and to assess the seismic performance of moment-resisting frames with these structural members. The paper describes an experimental campaign where a total of 36 specimens were tested, resorting to a novel testing setup, aimed at reducing both the preparation time and cost of the test specimens. Different geometrical and material parameters were considered, namely cross-section type, cross-section slenderness, aggregate replacement ratio, axial load level and lateral loading type. The members were tested under both monotonic and cyclic lateral loading, with different levels of applied axial loading. The test results show that the bending behaviour of CFST elements is highly dependent on the steel tube properties and that the type of infill does not have a significant influence on the flexural behaviour of the member. It is also found that Eurocode 4 is conservative in predicting the flexural capacity of the tested specimens. Additionally, it was found that the seismic design of composite moment- resisting frames with CFST columns, according to Eurocode 8, not only leads to lighter design solutions but also to enhanced seismic performance in comparison to steel frames.

Behavior of composite rigid frame bridge under bi-directional seismic excitations

Pushover analysis and time history analysis are conducted to explore the bi-directional seismic behavior of composite steel-concrete rigid frame bridge, which is composed of RC piers and steel-concrete composite girders. Both longitudinal and transverse directions excitations are investigated using OpenSees. Firstly, the applicability of pushover analysis based on the funda- mental mode is discussed. Secondly, an improved pushover analysis method considering the contribution of higher modes is proposed, and the applicability on composite rigid frame bridges under bi-directional earthquake is verified. Based on this method, an approach to predict the displacement responses of composite rigid frame bridge under random hi-directional seismic excitations by revising the elasto-plastic demand curve is also proposed. It is observed that the developed method yield a good estimate on the responses of composite rigid frame bridges under bi-directional seismic excitations.