Preparation of SiC_p/Al_2O_3-Al Composites by Directed Metal Oxidation

SiCp/Al2O3-Al composites were synthesized by means of direct metal oxidation method. The composition and microstructures of the composites were investigated using X-ray diffraction （XRD）, scanning electron microscopy （SEM） and metallurgical microscope. The effects of technical parameters on the properties of the product were analyzed. The results indicate that the composite possesses a dense microstructure, composed of three interpenetrated phases. Of them, SiO2 layer prohibits the powdering of the composites; Mg promotes the wetting and infiltration of the system and Si restricts the interfacial reaction while improving the wetting ability between reinforcement and matrix.

A review on transition metal oxides based photocatalysts for degradation of synthetic organic pollutants

This review provides insight into the current research trend in transition metal oxides(TMOs)-based photocatalysis in removing the organic colouring matters from water.For easy understanding,the research progress has been presented in four generations according to the catalyst composition and mode of application,viz:single component TMOs(the firstgeneration),doped TMOs/binary TMOs/doped binary TMOs(the second-generation),inactive/active support-immobilized TMOs(the third-generation),and ternary/quaternary compositions(the fourth-generation).The first two generations represent suspended catalysts,the third generation is supported catalysts,and the fourth generation can be suspended or supported.The review provides an elaborated comparison between suspended and supported catalysts,their general/specific requirements,key factors controlling degradation,and the methodologies for performance evaluation.All the plausible fundamental and advanced dye degradation mechanisms involved in each generation of catalysts were demonstrated.The existing challenges in TMOs-based photocatalysis and how the researchers approach the hitch to resolve it effectively are discussed.Future research trends are also presented.

Preparation and Supercapacitive Performance of CuFe_(2)O_(4) Hollow-Spherical Nanoparticles

Spinel-type CuFe_(2)O_(4)nanoparticles were syn-thesized by a solvother-mal method using ethy-lene glycol as solvent and polyvinylpyrroli-done(PVP)as disper-sant.The characteriza-tion results showed that the average diameter of the hollow-spherical CuFe_(2)O_(4)was approximately 100 nm with homogeneous morphology and negligible agglomeration.CuFe_(2)O_(4)was used as the active electrode material to explore its su-percapacitive properties in different concentrations of KOH electrolytes.It was found that the CuFe_(2)O_(4)hollow-spherical nanoparticles exhibit potential electronic performance in superca-pacitor,with a specific capacitance of 368.2 F/g and capacitance stability retention of 91.0%after 2000 cycles at the current density of 5 A/g in 3 mol/L KOH electrolyte.The present findings demonstrate that the CuFe_(2)O_(4)electrode materials can have important implications with practical prospects in energy storage systems.

Study on the Different Photocatalytic Performances for Tetracycline Hydrochloride Degradation of p-block Metal Composite Oxides Sr_(1.36)Sb_(2)O_6 and Sr_(2)Sb_(2)O_7

p-block metal composite oxides Sr_(1.36)Sb_(2)O_(6) and Sr_(2)Sb_(2)O_(7) synthesized by a hydrothermal method as photocatalysts in the degradation of tetracycline hydrochloride under UV light irradiation have been extensively studied.The effects of synthesis conditions on the photocatalytic activity were discussed.The Sr_(1.36)Sb_(2)O_(6)-100°C-24 h-5 and Sr_(2)Sb_(2)O_(7)-150℃-24 h^(-2) samples prepared under optimal conditions exhibited remarkably different photocatalytic activities.The essential factors influencing the difference of photocatalytic performance were revealed.The results showed that the different photocatalytic activities observed for Sr_(1.36)Sb_(2)O_(6)and Sr_(2)Sb_(2)O_(7) could be attributed to their different electronic and crystal structures.Our work will provide a new perspective for the screening and design of p-block metal composite oxide photocatalysts to enhance the removal of organic pollutants in the environment.

Hydrothermal Synthesis and Thermal Stability of Natural Mineral Lindgrenite

A natural mineral, lindgrenite Cu3 （ MoO4 ）2 （ OH）2, was synthesized from a mixture of sodium molybdate, copper sulfate, and morpholine in water under autogenous pressure at 170 ℃. The crystal structure of the mineral was determined and the final refinement for 791 observed reflections with Ⅰ 〉 2σ（Ⅰ） gave R1 = 0. 0205 and wR2 = 0. 0496. The thermal stability of the mineral was investigated by using TG-DTA and variable-temperature in situ X-ray diffraction（XRD） techniques. The crystalline Cu3Mo2O9 was obtained when the mineral underwent thermal dehydration at a temperature ranging from 300 to 400 ℃, and the mixture of MoO3 and CuO was formed through decomposition of Cu3Mo2O9 at a temperature ranging from 650 to 700 ℃. Therefore, the structure of the mineral was thermally unstable at above 300 ℃, suggesting that Lindgrenite was likely formed via the hydrothermal route occurring in the nature.

Characteristics of alumina particles in dispersion-strengthened copper alloys

Two types of alumina dispersion-strengthened copper（ADSC） alloys were fabricated by a novel in-situ reactive synthesis（IRS） and a traditional internal oxidation（IO） process. The features of alumina dispersoids in these ADSC alloys were investigated by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. It is found that nano-sized γ-Al2O3 particles of approximately 10 nm in diameter are homogeneously distributed in the IRS-ADSC composites. Meanwhile, larger-sized, mixed crystal structure alumina with rod-shaped morphology is embedded in the IO-ADSC alloy. The IRS-ADSC composites can obtain better mechanical and physical properties than the IO-ADSC composites; the tensile strength of the IRS-ADSC alloy can reach 570 MPa at room temperature, its electrical conductivity is 85% IACS, and the Rockwell hardness can reach 86 HRB.

Ultrahigh-energy and-power aqueous rechargeable zinc-ion microbatteries based on highly cation-compatible vanadium oxides

Aqueous multivalent-metal-ion intercalation chemistries hold genuine promise to develop safe and powerful microbatteries for potential use in many miniaturized electronics.However,their development is beset by state-of-the-art electrode materials having practical capacities far below their theoretical values.Here we demonstrate that high compatibility between layered transition-metal oxide hosts and hydrated cation guests substantially boost their multi-electron-redox reactions to offer higher capacities and rate capability,based on typical bipolar vanadium oxides preintercalated with hydrated cations(M_(x)V_(2)O_(5)).When seamlessly integrated on Au current microcollectors with a three-dimensional bicontinuous nanoporous architecture that offers high pathways of electron transfer and ion transport,the constituent Zn_(x)V_(2)O_(5) exhibits specific capacity of as high as∼527 mAh g^(−1) at 5 mV s^(−1) and retains∼300 mAh g^(−1) at 200 mV s^(−1) in 1 M ZnSO_(4) aqueous electrolyte,outperforming the M_(x)V_(2)O_(5)(M=Li,Na,K,Mg).This allows aqueous rechargeable zinc-ion microbatteries constructed with symmetric nanoporous Zn_(x)V_(2)O_(5)/Au interdigital microelectrodes as anode and cathode to show high-density energy of∼358 mWh cm^(−3)(a value that is forty-fold higher than that of 4 V/500μAh Li thin film battery)at high levels of power delivery.

Synthesis of La_2MoO_6@MWCNTs composite catalysts as Pt-free counter electrodes for dye-sensitized solar cell

Pt-free counter electrode(CE) composed of La2 MoO(LaO-MoO) was successfully synthesized by simple pyrolysis of lanthanum acetate(CHOLa·xHO) and hexaammonium heptamolybdate tetrahydrate((NH4)6 MoO·4 HO). Furthermore,three proportions composites catalysts of La2 MoO@MWCNTs based on La2 MoOand multiwall carbon nanotubes(MWCNTs) were prepared and characterized as Ptfree catalyst for CE in dye-sensitized solar cells(DSSCs). The morphology and structure of La2 MoO@MWCNTs composites were determined by scanning electron microscopy, transmission electron microscope and X-ray diffraction. The electrochemical performance of La2 MoO@MWCNTs composite catalysts for CEs was determined by photocurrent-voltage measurements, cyclic voltammetry,electrochemical impedance spectroscopy, and Tafel polarization. The power conversion efficiencies of4.68%, 4.87% and 5.06% are obtained for La2 MoO:MWCNTs with the mass ratios of 5:1, 3:1 and 1:1 towards the reduction of I~-to I~-under the same conditions,respectively,which are superior to those of MWCNTs(3,94%) and La2 MoO(1.71%) electrodes. The experimental results reveal that the presence of MWCNTs results in an augmented active catalytic surface area and enhanced charge transfer from CE to the electrolyte.