This paper characterizes the boundedness and compactness of weighted composition operators between Bers-type space （or little Bers-type space） and Bergman space. Some estimates for the norm of weighted composition o...This paper characterizes the boundedness and compactness of weighted composition operators between Bers-type space （or little Bers-type space） and Bergman space. Some estimates for the norm of weighted composition operators between those spaces are obtained.展开更多
In this paper, using incremental equilibrium equation, the authors have studiedthe effeet of ultimate bearing capacity of every component on structuralstability, and discussed the stability analysis method for space c...In this paper, using incremental equilibrium equation, the authors have studiedthe effeet of ultimate bearing capacity of every component on structuralstability, and discussed the stability analysis method for space compositestructures. With the help of the test results for the concrete filled ateel tubeskeleton of the long-spen RC arch bridse, it is proved that the proposed methodis accurate and reliable.展开更多
The study examined joint discontinuity spacing effect on drilling condition and performance in selected rocks in llorin and Ibese areas, Nigeria. Five samples for each rock type （gneiss and limestone） were tested in...The study examined joint discontinuity spacing effect on drilling condition and performance in selected rocks in llorin and Ibese areas, Nigeria. Five samples for each rock type （gneiss and limestone） were tested in the laboratory for chemical, physical and mechanical properties. Dip direction and joint spacing were measured using compass clinometers. The chemical composition was determined using X-ray Fluores- cence （XRF） spectrometer. The results show that gneiss has SiO2 of 61.88g and limestone has CaO content of 52.3g. The average dry density of gneiss and limestone are 2.6 and 2.39 g/cm^3, respectively. The uniaxial compressive strength of gneiss and limestone are 195 and 93.83 MPa, respectively. These rocks are classified as strong and moderately strong rock. Gneiss and limestone have mean joint discontinuity spacing of 0.79 and 0.25 m, which classified them as moderate and wide joint spacing respectively. Joint spacing was correlated with specific energy, bit wear and uniaxial compressive using Statistical Package for Social Science （SPSS）. The regression model has multiple coefficient of correlation of R^2 = 0.791 and R^2 =0.995 for gneiss and limestone, respectively. The variation in joint spacing could be attributed to spe- cific energy, bit wear and uniaxial compressive strength which affect drilling condition and performance. Ultimately, as joint spacing gets closer, the drilling velocity increases, drill string will be stable.展开更多
he expressions of the composition space and the dependent properties of the lattice constant, the energy bandgap and the Gibbs energy were presented for the (Ga,In)(As,Sb) quaternary compound semiconductor. On the bas...he expressions of the composition space and the dependent properties of the lattice constant, the energy bandgap and the Gibbs energy were presented for the (Ga,In)(As,Sb) quaternary compound semiconductor. On the basis of these expressions, a computer aided analysis system is set up for the design of ⅢⅤ compound semiconductor materials and growth processes. By using this system, a comprehensively optimized diagram is constructed through the projection of the optoelectronic properties (energy bandgap or wave length), in which the composition relations are matched to substrates and the miscibility gaps.展开更多
基金Supported by the NNSF of China(10471039)the Natural Science Foundation of Zhejiang Province(M103 104)the Natural Science Foundation of Huzhou City(2005YZ02).
文摘This paper characterizes the boundedness and compactness of weighted composition operators between Bers-type space （or little Bers-type space） and Bergman space. Some estimates for the norm of weighted composition operators between those spaces are obtained.
文摘In this paper, using incremental equilibrium equation, the authors have studiedthe effeet of ultimate bearing capacity of every component on structuralstability, and discussed the stability analysis method for space compositestructures. With the help of the test results for the concrete filled ateel tubeskeleton of the long-spen RC arch bridse, it is proved that the proposed methodis accurate and reliable.
文摘The study examined joint discontinuity spacing effect on drilling condition and performance in selected rocks in llorin and Ibese areas, Nigeria. Five samples for each rock type （gneiss and limestone） were tested in the laboratory for chemical, physical and mechanical properties. Dip direction and joint spacing were measured using compass clinometers. The chemical composition was determined using X-ray Fluores- cence （XRF） spectrometer. The results show that gneiss has SiO2 of 61.88g and limestone has CaO content of 52.3g. The average dry density of gneiss and limestone are 2.6 and 2.39 g/cm^3, respectively. The uniaxial compressive strength of gneiss and limestone are 195 and 93.83 MPa, respectively. These rocks are classified as strong and moderately strong rock. Gneiss and limestone have mean joint discontinuity spacing of 0.79 and 0.25 m, which classified them as moderate and wide joint spacing respectively. Joint spacing was correlated with specific energy, bit wear and uniaxial compressive using Statistical Package for Social Science （SPSS）. The regression model has multiple coefficient of correlation of R^2 = 0.791 and R^2 =0.995 for gneiss and limestone, respectively. The variation in joint spacing could be attributed to spe- cific energy, bit wear and uniaxial compressive strength which affect drilling condition and performance. Ultimately, as joint spacing gets closer, the drilling velocity increases, drill string will be stable.
文摘he expressions of the composition space and the dependent properties of the lattice constant, the energy bandgap and the Gibbs energy were presented for the (Ga,In)(As,Sb) quaternary compound semiconductor. On the basis of these expressions, a computer aided analysis system is set up for the design of ⅢⅤ compound semiconductor materials and growth processes. By using this system, a comprehensively optimized diagram is constructed through the projection of the optoelectronic properties (energy bandgap or wave length), in which the composition relations are matched to substrates and the miscibility gaps.
