Increased performance of an organic light-emitting diode by employing a zinc phthalocyanine based composite hole transport layer

We demonstrate that the electroluminescent performances of organic light-emitting diodes are significantly improved by employing a zinc phthalocyanine （ZnPc）-based composite hole transport layer （c-HTL）. The optimum ris-（8-hydroxyquinoline）aluminum （Alq3）-based organic light-emitting diode with a c-HTL exhibits a lower turn-on voltage of 2.8 V, a higher maximum current efficiency of 3.40 cd/A and a higher maximum power efficiency of 1.91 lm/W, which are superior to those of the conventional device （turn-on voltage of 3.8 V, maximum current efficiency of 2.60 cd/A, and maximum power efficiency of 1.21 lm/W）. We systematically studied the effects of different kinds of N’-diphenyl-N,N’-bis（1-naphthyl）（1,1’-biphenyl）-4,4’diamine （NPB）：ZnPc c-HTL. Meanwhile, we also investigate their mechanisms different from that in the case of using ZnPc as buffer layer. The specific analysis is based on the absorption spectra of the hole transporting material and current density–voltage characteristics of the corresponding hole-only devices.

A study of the chemical composition and transport of marine aerosols over the ocean near China

In this paper the authors cite the aerosol samples collected with a KA-200 Anderson cascade Impactor and a KB-120 sampler during the first cruise of the Kuroshio investigation operated by the People's Republic of China and Japan cooperative program, from July 23 to August 21, 1987. The concentration size distributions and composition of marine aerosols over the Kuroshio area are analyzed. Neutron activation analysis is used to determine the elemental composition of the aerosols. The authors also discuss some characteristics of marine aerosols relating to long-range transport of crustal and anthropogenic elements from the continent to the remote ocean. Analytical results indicate that elements Al, Fe, Sc and Sb over this area are obviously influenced by the continent of Asia, and the size distributions are changed after long-range transport. The concentration of large particles increase. The concentrations of the elements C1 and Na are closely related to ocean conditions; the source of the elements Cl and Na is mainly the ocean. Besides coal combustion, the ocean is also a very important source for the element Se. The amount of Se is related to the distribution of marine life.

Stabilizing semi-transparent perovskite solar cells with a polymer composite hole transport layer

Semi-transparent perovskite solar cells(ST-PSCs)have broad applications in building integrated photovoltaics.However,the stability of ST-PSCs needs to be improved,especially in n-i-p ST-PSCs since the doped 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene(Spiro-OMeTAD)is unstable at elevated temperatures and high humidity.In this work,aπ-conjugated polymer poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophene-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione)](PBDB-T)is selected to form a polymer composite hole transport layer(HTL)with Spiro-OMeTAD.The sulfur atom of the thiophene unit and the carbonyl group of the polymer interact with the undercoordinated Pb2+at the perovskite surface,which stabilizes the perovskite/HTL interface and passivates the interfacial defects.The incorporation of the polymer also increases the glass transition temperature and the moisture resistance of Spiro-OMeTAD.As a result,we obtain ST-PSCs with a champion efficiency of 13.71%and an average visible light transmittance of 36.04%.Therefore,a high light utilization efficiency of 4.94%can be obtained.Moreover,the encapsulated device can maintain 84%of the initial efficiency after 751 h under continuous one-sun illumination(at 30%relative humidity)at the open circuit and the unencapsulated device can maintain 80%of the initial efficiency after maximum power tracking for more than 1250 h under continuous one-sun illumination.

Performance Enhancement in Dye-Sensitized Solar Cells with Composite Mixtures of TiO_2 Nanoparticles and TiO_2 Nanotubes

In the present investigation,a new composite nanostructured photoanodes were prepared using TiO_2 nanotubes（TNTs） with TiO_2 nanoparticles（TNPs）.TNPs were synthesized by sol-gel method,and TNTs were prepared through alkali hydrothermal method.Dye-sensitized solar cells（DSSCs） were fabricated with different photoanodes comprising of various ratios of TNTs ＋ TNPs,synthetic indigo dye as photosensitizer,PMII（l-propyl-3-methylimidazolium iodide） as ionic liquid electrolyte and cobalt sulfide as counter electrode.The structures and morphologies of TNPs and TNTs were analyzed through X-ray diffractometer,transmission electron microscope and scanning electron microscopes.The results of the investigation showed that the DSSC-4 made with composite photoanode structure（TNTs/TNPs）（90% of TNPs ＋ 10% of TNTs） had improved photocurrent efficiency（2.11%） than pure TNPs（1.00%） and TNT film（0.78%）.Electrochemical impedance spectra revealed that the composite TNTs/TNPs film-based DSSCs possessed the lowest charge-transfer resistances and longest electron lifetime.Hence,it could be concluded that the composite TNTs/TNPs photoanode facilitates the charge transport rate and enhances the efficiencies of DSSCs.