Preparation and Performance of Organically Modified Montmorillonite Composite Separation Membrane

A new composite separation membrane was developed by using organically modified montmorillonite(OMMT)as an additive.The effects of OMMT on the modification and properties of PVDF composite membranes were investigated.It is found that different kinds and amounts of OMMT into the casting solution can obviously change the pure water flux,separation performance and hydrophilicity of composite membrane in varying degrees.When the TA/PDA-MMT was 0.5 wt%,the pure water flux of the membrane reached the maximum,which was 584.7 L/(m^(2)·h),about 6 times that of the original membrane.The OMMT/PVDF composite membrane had good hydrophilicity and stability in the treatment of oily wastewater.The development of novel OMMT/PVDF composite membrane will provide a new idea for solving the problem of oily wastewater treatment.

Indispensable gutter layers in thin-film composite membranes for carbon capture

Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.

Outstanding proton conductivity over wide temperature and humidity ranges and enhanced mechanical, thermal stabilities for surface-modified MIL-101-Cr-NH_(2)/Nafion composite membranes

High-performance proton exchange membranes are of great importance for fuel cells.Here,we have synthesized polycarboxylate plasticizer modified MIL-101-Cr-NH_(2)(PCP-MCN),a kind of hybrid metal-organic framework,which exhibits a superior proton conductivity.PCP-MCN nanoparticles are used as additives to fabricate PCP-MCN/Nafion composite membranes.Microstructures and characteristics of PCP-MCN and these membranes have been extensively investigated.Significant enhancement in proton conduction for PCP-MCN around 55℃ is interestingly found due to the thermal motion of the PCP molecular chains.Robust mechanical properties and higher thermal decomposition temperature of the composite membranes are directly ascribed to strong intermolecular interactions between PCP-MCN and Nafion side chains,i.e.,the formation of substantial acid–base pairs(-SO_(3)^(-)…^(+)H–NH-),which further improves compatibility between additive and Nafion matrix.At the same humidity and temperature condition,the water uptake of composite membranes significantly increases due to the incorporation of porous additives with abundant functional groups and thus less crystallinity degree in comparison to pristine Nafion.Proton conductivity(σ)over wide ranges of humidities(30-100%RH at 25℃)and temperatures(30-98℃ at 100%RH)for prepared membranes is measured.The s in PCPMCN/Nafion composite membranes is remarkably enhanced,i.e.0.245 S/cm for PCP-MCN-3wt.%/Nafion is twice that of Nafion membrane at 98℃ and 100%RH,because of the establishment of well-interconnected proton transport ionic water channels and perhaps faster protonation–deprotonation processes.The composite membranes possess weak humidity-dependence of proton transport and higher water uptake due to excellent water retention ability of PCP-MCN.In particular,when 3 wt.%PCP-MCN was added to Nafion,the power density of a single-cell fabricated with this composite membrane reaches impressively 0.480,1.098 W/cm^(2) under 40%RH,100%RH at 60℃,respectively,guaranteeing it to be a promising proton exchange membrane.

A Rapid-Ab/Desorption and Portable Photothermal MIL- 101(Cr) Nanofibrous Composite Membrane Fabricated by Spray-Electrospinning for Atmosphere Water Harvesting

MIL-101(Cr)is a promising moisture absorbent for solar-driven water harvesting from moisture to tackle the worldwide water shortage issue.However,the MIL-101(Cr)powder suffers from a long ab/desorption cycle due to the crystal aggregation caused by its inherent powder properties.Here,we demonstrate a MIL-101(Cr)nanofibrous composite membrane with a nanofibrous matrix where MIL-101(Cr)is monodisperse in the 3D porous nanofibrous matrix through a simple spray-electrospinning strategy.The continuous porous nanofibrous matrix not only offers sufficient sites for MIL-101(Cr)loading but also provides rapid moisture transport channels,resulting in a super-rapid ab/desorption duration of 50 min(including an absorption process for 40 min and a desorption process for 10 min)and multicycle daily water production of 15.9 L kg^(−1) d^(−1).Besides,the MIL-101(Cr)nanofibrous composite membrane establishes a high solar absorption of 92.8%,and excellent photothermal conversion with the surface temperature of 70.7°C under one-sun irradiation.In addition,the MIL-101(Cr)nanofibrous composite membrane shows excellent potential for practical application due to its flexibility,portability,and use stability.This work provides a new perspective of shortening MOF ab/desorption duration by introducing a porous nanofibrous matrix to improve the specific water production for the solar-driven ab/desorption water harvesting technique.

MXene@c-MWCNT Adhesive Silica Nanofiber Membranes Enhancing Electromagnetic Interference Shielding and Thermal Insulation Performance in Extreme Environments

A lightweight flexible thermally stable composite is fabricated by com-bining silica nanofiber membranes(SNM)with MXene@c-MWCNT hybrid film.The flexible SNM with outstanding thermal insulation are prepared from tetraethyl orthosilicate hydrolysis and condensation by electrospinning and high-temperature calcination;the MXene@c-MWCNT_(x:y)films are prepared by vacuum filtration tech-nology.In particular,the SNM and MXene@c-MWCNT_(6:4)as one unit layer(SMC_(1))are bonded together with 5 wt%polyvinyl alcohol(PVA)solution,which exhibits low thermal conductivity(0.066 W m^(-1)K^(-1))and good electromagnetic interference(EMI)shielding performance(average EMI SE_(T),37.8 dB).With the increase in func-tional unit layer,the overall thermal insulation performance of the whole composite film(SMC_(x))remains stable,and EMI shielding performance is greatly improved,especially for SMC_(3)with three unit layers,the average EMI SET is as high as 55.4 dB.In addition,the organic combination of rigid SNM and tough MXene@c-MWCNT_(6:4)makes SMC_(x)exhibit good mechanical tensile strength.Importantly,SMC_(x)exhibit stable EMI shielding and excellent thermal insulation even in extreme heat and cold environment.Therefore,this work provides a novel design idea and important reference value for EMI shielding and thermal insulation components used in extreme environmental protection equipment in the future.

Electrospinning-hot pressing technique for the fabrication of thermal and electrical storage membranes and its applications

The combination of electrospinning and hot pressing,namely the electrospinning-hot pressing technique(EHPT),is an efficient and convenient method for preparing nanofibrous composite materials with good energy storage performance.The emerging composite membrane prepared by EHPT,which exhibits the advantages of large surface area,controllable morphology,and compact structure,has attracted immense attention.In this paper,the conduction mechanism of composite membranes in thermal and electrical energy storage and the performance enhancement method based on the fabrication process of EHPT are systematically discussed.Moreover,the state-of-the-art applications of composite membranes in these two fields are introduced.In particular,in the field of thermal energy storage,EHPT-prepared membranes have longitudinal and transverse nanofibers,which generate unique thermal conductivity pathways;also,these nanofibers offer enough space for the filling of functional materials.Moreover,EHPT-prepared membranes are beneficial in thermal management systems,building energy conservation,and electrical energy storage,e.g.,improving the electrochemical properties of the separators as well as their mechanical and thermal stability.The application of electrospinning-hot pressing membranes on capacitors,lithium-ion batteries(LIBs),fuel cells,sodium-ion batteries(SIBs),and hydrogen bromine flow batteries(HBFBs)still requires examination.In the future,EHPT is expected to make the field more exciting through its own technological breakthroughs or be combined with other technologies to produce intelligent materials.

Recent advances in multi-layer composite polymeric membranes for CO_2 separation: A review

The development of multilayer composite membranes for CO_2 separation has gained increasing attention due to the desire for energy efficient technologies. Multilayer composite membranes have many advantages, including the possibility to optimize membrane materials independently by layers according to their different functions and to reduce the overall transport resistance by using ultrathin selective layers, and less limitations on the material mechanical properties and processability. A comprehensive review is required to capture details of the progresses that have already been achieved in developing multilayer composite membranes with improved CO_2 separation performance in the past 15-20 years.In this review, various composite membrane preparation methods were compared, advances in composite membranes for CO_2/CH_4 separation,CO_2/N_2 and CO_2/H_2 separation were summarized with detailed data, and challenges facing for the CO_2 separation using composite membranes,such as aging, plasticization and long-term stability, were discussed. Finally the perspectives and future research directions for composite membranes were presented.

Pervaporation Separation of Butanol-Water Mixtures Using Polydimethylsiloxane/Ceramic Composite Membrane

Pervaporation has attracted considerable interest owing to its potential application in recovering biobutanol from biomass acetone-butanol-ethanol (ABE) fermentation broth. In this study, butanol was recovered from its aqueous solution using a polydimethylsiloxane (PDMS)/ceramic composite pervaporation membrane. The effects of operating temperature, feed concentration, feed flow rate and operating time on the membrane pervaporation performance were investigated. It was found that with the increase of temperature or butanol concentration in the feed, the total flux through the membrane increased while the separation factor decreased slightly. As the feed flow rate increased, the total flux increased gradually while the separation factor changed little. At 40°C and 1% (by mass) butanol in the feed, the total flux and separation factor of the membrane reached 457.4 g·m?2·h?1 and 26.1, respectively. The membrane with high flux is suitable for recovering butanol from ABE fermentation broth.

Preparation of Composite Charge-mosaic Hollow Fiber Membrane by Interfacial Polymerization

The preparation of composite charge-mosaic membrane included spinning of hollow fiber as the supporting membrane, preparing a selective layer on the inside surface of the fiber by interfacial polymerization. The charge-mosaic membranes show a high salt permeability while retaining sucrose. The charge-mosaic membrane can be effectively used to separate multivalent salts with organic matter of molecular weight great than 300 g/mol in industry.

Solvent Recovery from Soybean Oil/Hexane Miscella by PDMS Composite Membrane

Traditional solvent recovery in the extraction step of edible oil processing is distillation,which consumes large amounts of energy.If the distillation is replaced by membrane process,the energy consumption can be reduced greatly.In this work,two kinds of membrane,PDMS(polydimethylsiloxane) composite membrane and Zeolite filled PDMS membrane were prepared,in which asymmetric microporous PVDF(polyvinylidenefluoride) membrane prepared with phase inversion method was functioned as the microporous supporting layer in the flat-plate composite membrane.The different function compositions of the PDMS/PVDF composite membranes were characterized by reflection Fourier transform infrared(FTIR) spectroscopy.The surface and section of PDMS/PVDF composite membranes were investigated by scanning electron microscope(SEM).The PDMS NF(nanofiltration) membranes were then applied in the recovery of hexane from soybean oil/hexane miscellas(1:3,mass ratio).The effects of pressure(0.5-1.5 MPa),cross-linking temperature and PDMS layer thickness on membrane performances were investigated.The results indicated that both two kinds of NF membranes were promising for solvent recovery,and zeolite filled in PDMS NF membrane could enhance the separation performance.

Substrate matters:The influences of substrate layers on the performances of thin-film composite reverse osmosis membranes

Thin-film composite(TFC) reverse osmosis(RO) membranes are playing the dominating role in desalination.Tremendous efforts have been put in the studies on the polyamide selective layers. However, the effect of the substrate layers is far less concerned. In this review, we summarize the works that consider the impacts of the substrates, including pore sizes, surface hydrophilicity, on the processes of interfacial polymerization and consequently on the morphologies of the active layers and on final RO performances of the composite membranes. All the works indicate that the pore sizes and surface hydrophilicity of the substrate evidently influence the RO performances of the composite membranes. Unfortunately, we find that the observations and understandings on the substrate effect are frequently varied from case to case because of the lack of substrates with uniform pores and surface chemistries. We suggest using track-etched membranes or anodized alumina membranes having relatively uniform pores and functionalizable pore walls as model substrates to elucidate the substrate effect.Moreover, we argue that homoporous membranes derived from block copolymers have the potential to be used as substrates for the large-scale production of high-performances TFC RO membranes.

Fabrication of high-performance PVA/PAN composite pervaporation membranes crosslinked by PMDA for wastewater desalination

The pyromellitic dianhydride（PMDA） crosslinked poly（vinyl alcohol）（PVA） was coated on top of the PAN ultrafiltration membrane to form a PVA/PAN composite PV membranes for wastewater desalination. The composite membranes have high application value in industrial wastewater treatment. By varying the membrane fabrication parameters including the weight percent（wt%） of the PMDA, the crosslink temperature and duration, membrane with the best desalination performance was obtained. The composite membrane with a 2-lm-thick PVA selective layer containing 20 wt% of PMDA and being crosslinked at 100 °C for 2 h showed the highest Na Cl rejection of 99.98% with a water flux of 32.26 L/（m^2 h）at 70 °C using the 35,000 ppm Na Cl aqueous solution as feed. FTIR spectroscopy, wide-angle X-ray diffraction, thermogravimetric analysis and scanning electron microscope have been used to characterize the structures and properties of both the crosslinked PVA dense films and PVA/PAN composite membranes. The effects of the concentrations of PMDA,the crosslinking time and temperature to the membrane water contact angle, swelling degree, salt rejection and water flux were systematically studied.

Preparation of composite poly(ether block amide)membrane for CO_2 capture

In this study, a poly（ether block amide） （Pebax 1657） composite membrane applied for COa capture was prepared by coating Pebax 1657 solution on polyacrylonitrile （PAN） ultrafiltration membrane. Ethanol/water mixture was used as the solvent of Pebax and the effects of ethanol/water mass ratios and Pebax concentration on the permeation properties of composite membrane were studied. To enhance the com- posite membrane permeance, the gutter layer, made from reactive amino silicone crosslinking with potydimethylsiloxane （PDMS）, was de- signed. The influence of crosslinldng degree of the gutter layer on membrane performance was investigated. As a result, a Pebardamino- PDMS/PAN multilayer membrane with hexane resistance was developed, showing CO2 permeance of 350 GPU and CO2/N2 selectivity over 50. The blend of polyethylene glycol dimethyl ether （PEG-DME） with Pebax as coating material was studied to further improve the membrane performance. After being combined with PEG-DME additive, CO2 permeance of the final Pebax-PEG-DME/amino-PDMS/PAN composite membrane reached 400 GPU above with CO2/Na selectivity over 65.

Ceramic Supported PDMS and PEGDA Composite Membranes for CO2 Separation

Composite membranes have attracted increasing attentions owing to their potential applications for CO2 separation. In this work, ceramic supported polydimethylsiloxane （PDMS） and poly （ethylene glycol） diacrylate （PEGDA） composite membranes were prepared. The microstructure and physicochemical properties of the compos- ite membranes were characterized. Preparation conditions were systematically optimized. The gas separation performance of the as-prepared membranes was studied by pure gas and binary gas permeation measurement of CO〉 N2 and H〉 Experiments showed that PDMS, as silicone rubber, exhibited larger permeance and lower separation factors. Conversely, PEGDA composite membrane presented smaller gas permeance but higher ideal selectivity for CO2/N2. Compared to the performance of those membranes using polymeric supports or freestanding membranes, the two kinds of ceramic supported composite membranes exhibited higher gas permeance and acceptable selectivity. Therefore, the ceramic supported composite membrane can be expected as a candidate for CO2 separation from light gases.

Fouling-resistant Composite Membranes for Separation of Oil-in-water Microemulsions

Fouling-resistant ceramic-supported polymer composite membranes were developed for removal of oil-in-water （O/W） mieroemulsions. The composite membranes were featured with an asymmetric three-layer structure, i.e., a porous ceramic membrane substrate, a polyvinylidene fluoride （PVDF） ultrafiltration sub-layer, and a polyamide/polyvinyl alcohol （PVA） composite thin top-layer. The PVDF polymer was east onto the tubular porous ceramic membranes with an immersion precipitation method, and the polyamide/PVA composite thin top-layer was fabricated with an inteffaeial polymerization method. The effects of the sub-layer composition and the recipe in the inteffaeial polymerization for fabricating the top-layer on the structure and performance of composite membranes were systematically investigated. The prepared composite membranes showed a good performance for treating the O/W microemulsions with a mean diameter of about 2.41μm. At the operating pressure of 0.4MPa, the hydraulic permeability remained steadily about 190L·m^-2·h^-1, the oil concentration in the permeate was less than 1.6mg·L^-1, and the oil rejection coefficient was always higher than 98.5% throughout the operation from the beginning.

STRUCTURE AND PROPERTIES OF COMPOSITE POLYURETHANE HOLLOW FIBER MEMBRANES

Composite polyurethane(PU)-SiO_2 hollow fiber membranes were successfully prepared via optimizing thetechnique of dry-jet wet spinning,and their pressure-responsibilities were confirmed by the relationships of pure water flux-transmembrane pressure(PWF-TP)for the first time.The origin for this phenomenon was analyzed on the basis of membranestructure and material characteristics.The effects of SiO_2 content on the structure and properties of membrane wereinvestigated.The experimental results indicated that SiO_2 in membrane created a great many interfacial micro-voids andplayed an important role in pressure-responsibility,PWF and rejection of membrane:with the increase of SiO_2 content,theability of membrane recovery weakened,PWF increased,and rejection decreased slightly.

Polymer/Ceramic Composite Membranes and Their Application in Pervaporation Process

Pervaporation(PV),as an environmental friendly and energy-saving separation technology,has been received increasing attention in recent years.This article reviews the preparation and application of macroporous ceramic-supported polymer composite pervaporation membranes.The separation materials of polymer/ceramic composite membranes presented here include hydrophobic polydimethylsiloxane(PDMS) and hydrophilic poly(vinyl alcohol)(PVA),chitosan(CS) and polyelectrolytes.The effects of ceramic support treatment,polymer solution properties,interfacial adhesion and incorporating or blending modification on the membrane structure and PV performance are discussed.Two in-situ characterization methods developed for polymer/ceramic composite membranes are also covered in the discussion.The applications of these composite membranes in pervaporation process are summarized as well,which contain the bio-fuels recovery,gasoline desulfuration and PV coupled proc-ess using PDMS/ceramic composite membrane,and dehydration of alcohols and esters using ceramic-supported PVA or PVA-CS composite membrane.Finally,a brief conclusion remark on polymer/ceramic composite mem-branes is given and possible future research is outlined.

Preparation of felt-metal supported modified polyvinyl alcohol composite hydrophilic ultrafiltration membrane

A novel technology of preparation of felt-metal supported modified polyvinyl alcohol（PVA） ultrafiltration（UF） membrane was invented, which could avoid the blockage of the holes of support layer and the leakage of the casting solution through the holes of support layer. Felt-metal supported ferric sulfate modified PVA composite UF membranes were prepared by the innovative technology. The results show that the composite membranes are used to treat 1 000 mg/L oil/water emulsion at trans-membrane pressure from 0.25 to 0.45 MPa, the permeate flux is from 36 to 52 L/（m2·h）, and the retention of chemical oxygen demand（COD） is over 92%. The composite membrane resistance increases with the increase of trans-naembrane pressure.

Reducing active layer thickness of polyamide composite membranes using a covalent organic framework interlayer in interfacial polymerization

Polyamide(PA)-based thin-film composite membranes exhibit enormous potential in water purification,owing to their facile fabrication,decent performance and desirable stability.However,the thick PA active layer with high transport resistance from the conventional interfacial polymerization hampers their applications.The controllable fabrication of a thin PA active layer is essential for high separation efficiency but still challenging.Herein,a covalent organic framework TpPa-1 interlayer was firstly deposited on a polyethersulfone(PES)substrate to reduce the thickness of PA active layer in interfacial polymerization.The abundant pores of TpPa-1 increase the local concentration of amine monomers by adsorbing piperazine molecules,while hydrogen bonds between hydrophilic groups of TpPa-1 and piperazine molecules slow down their diffusion rate.Arising from those synergetic effects,the PA active layer is effectively reduced from 200 nm to 120 nm.By optimizing TpPa-1 interlayer and PA active layer,the water flux of resultant membranes can reach 171.35 L·m^-2·h^-1·MPa^-1,which increased by 125.4%compared with PA/PES membranes,while the rejection rates of sodium sulfate and dyes solution remained more than 90%and 99%,respectively.Our strategy may stimulate rational design of ultrathin PA-based nanofiltration membranes with high performances.

STUDY ON CONCENTRATING SULFURIC ACID SOLUTION BY MEMBRANE DISTILLATION WITH METAL - PTFE COMPOSITE MEMBRANE

concentrating sulfuric acid by membrane distillation in a flat sheet direct contact membrane distillation device with a self made metal PTFE composite membrane has been studied. The effect of sulfuric acid concentration of feed, the flowrate and liquor temperature in high temperature side and low temperature side on the flux and separation efficiency is investigated. The stability of this composite membrane is also inspected. The experimental results show that the metal PTFE composite membrane can be used in membrane distillation, and its properties are very stable. It is feasible to concentrate sulfuric acid by membrane distillation with this membrane.