Lateral load-carrying capacity analyses of composite shear walls with double steel plates and filled concrete with binding bars

A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.

Experimental and analytical study on seismic behavior of steel-concrete multienergy dissipation composite shear walls

In this paper, a steel-concrete multi-energy dissipation composite shear wall, comprised of steel-reinforced concrete （SRC） columns, steel plate （SP） deep beams, a concrete wall and energy dissipation strips, is proposed. In order to study the multi-energy dissipation behavior and restorability after an earthquake, two stages of low cyclic loading tests were carded out on ten test specimens. In the first stage, test on five specimens with different number of SP deep beams was carried out, and the test lasted until the displacement drift reached 2%. In the second stage, thin SPs were welded to both sides of the five specimens tested in the first stage, and the same test was carried out on the repaired specimens （designated as new specimens）. The load-bearing capacity, stiffness, ductility, hysteretic behavior and failure characteristics were analyzed for both stages and the results are discussed herein. Extrapolating from these results, strength calculation models and formulas are proposed herein and simulations using ABAQUS carried out, they show good agreement with the test results. The study demonstrates that SRC columns, SP deep beams, concrete wall and energy dissipation strips cooperate well and play an important role in energy dissipation. In addition, this study shows that the shear wall has good recoverability after an earthquake, and that the welding of thin SP＇s to repair a deformed wall is a practicable technique.

Analysis and seismic tests of composite shear walls with CFST columns and steel plate deep beams

A composite shear wall concept based on concrete filled steel tube （CFST） columns and steel plate （SP） deep beams is proposed and examined in this study. The new wall is composed of three different energy dissipation elements： CFST columns; SP deep beams; and reinforced concrete （RC） strips. The RC strips are intended to allow the core structural elements - the CFST columns and SP deep beams - to work as a single structure to consume energy. Six specimens of different configurations were tested under cyclic loading. The resulting data are analyzed herein. In addition, numerical simulations of the stress and damage processes for each specimen were carried out, and simulations were completed for a range of location and span-height ratio variations for the SP beams. The simulations show good agreement with the test results. The core structure exhibits a ductile yielding mechanism characteristic of strong column-weak beam structures, hysteretic curves are plump and the composite shear wall exhibits several seismic defense lines. The deformation of the shear wall specimens with encased CFST column and SP deep beam design appears to be closer to that of entire shear walls. Establishing optimal design parameters for the configuration of SP deep beams is pivotal to the best seismic behavior of the wall. The new composite shear wall is therefore suitable for use in the seismic design of building structures.

Numerical Analysis of the Structure of High-Strength Double-Layer Steel Plate Concrete Shaft by Drilling Method of Water-Bearing Weak Rock Formation

In order to ensure the safety of coal mine shaft construction, a double-layer steel plate concrete composite shaft wall structure was proposed. However, fewer studies were conducted on this structure, which made engineers too confused to fully recognize its feasibility of this structure. Hence, based on the previous experimental research on the Taohutu mine construction project in Ordos in Inner Mongolia, this research paper aims to provide a widely deep numerical analysis by the usage of the finite element software, in fact, to establish the corresponding numerical analysis model and make a comparison with the experimental data to get the rationality of the verified model. The influence of the composite characteristics of the steel plate and concrete on the ultimate bearing capacity and stress field of the shaft wall structure is studied here through the method of multi-factor analysis. Also, the optimal design scheme of the double-layer steel plate and concrete composite shaft wall structure is proposed in this research paper.

Pseudo-dynamic testing of a fabricated composite frame with steel plate shear walls

A pseudo-dynamic testing program was generated on a fabricated composite frame with steel plate shear walls （SPSWs） to study its seismic perlbrmance. The specimen was a three-storey single-bay frame, which was composed of H- section steel columns and composite beams, and was assembled by bolted height-adjustable steel beam-to-column connections （BHA connections）. Beam-only-connected SPSWs were selected as lateral load resisting members. The specimen was subjected to four ground motions of progressively increasing intensity. The results showed that： （1） beam-only-connected S PSWs provided sufficient lateral load resistance, lateral stiffness, and energy dissipation capacity to the fabricated frame via the tension ficld action developed in their infill panels; （2） the fabricated frame, assembled by BHA connections, exhibited substantial redundancy and good ductility; （3） an undesirable failure mode of the fabricated frame, in huge earthquakes, included severe cracking in composite beams and block shear failure in SPSWs＇ connections; （4） the inter-storey shear force distribution determined by ASCE/SE1 7-10 was verified with experimental data.

Experimental research on the seismic behavior of CSPSWs connected to frame beams

The seismic performance of composite steel plate shear walls （CSPSWs） that consist of a steel plate shear wall （SPSW） with reinforced concrete （RC） panels attached to one or both sides by means of bolts or connectors is experimentally studied. The shear wall is connected to the frame beams but not to the columns. This arrangement restrains the possible out-of-plane buckling of the thin-walled steel plate, thus significantly increasing the bearing capacity and ductility of the overall wall, and prevents the premature overall or local buckling failure of the frame columns. From a practical viewpoint, these solutions can provide open space in a floor as this type of composite shear walls with a relatively small aspect ratio can be placed parallel along a bay. In this study, four CSPSWs and one SPSW were tested and the results showed that both CSPSWs and SPSW possessed good ductility. For SPSW alone, the buckling appeared and resulted in a decrease of bearing capacity and energy dissipation capacity. In addition, welding stiffeners at corners were shown to be an effective way to increase the energy dissipation capacity of CSPSWs.

装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能

为研究装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能,对1个足尺轻钢框架结构试件和3个足尺轻钢框架-轻钢骨架轻混凝土墙板结构试件进行了低周反复荷载下的抗震性能试验及理论分析,试件变量包括:2种装配构造,即内嵌式装配墙板、外贴式装配墙板;2种轻钢骨架轻混凝土墙板,即框架式轻钢骨架轻混凝土墙板、桁架式轻钢骨架轻混凝土墙板。研究了各试件的破坏特征和损伤演化过程,分析了结构滞回特性、承载力、变形能力、刚度退化、耗能性能和应变。结果表明:装配式轻钢框架-轻钢骨架轻混凝土墙板结构共同工作性能良好,其水平承载力相比轻钢框架提高了204.7%~210.4%,抗侧刚度提高了257.3%~512.5%,结构变形及耗能能力有显著提高;内嵌墙板的自攻钉连接构造以及外贴墙板的螺栓连接构造传力性能可靠,结构具备2道抗震防线的受力特征;基于简化塑性分析模型以及拉压杆软化桁架模型,对试件承载力进行了计算,计算结果与试验符合较好。

焊接多腔双钢板-混凝土组合剪力墙抗震性能分析

大多数双钢板-混凝土组合剪力墙采用螺栓连接或焊接肋的方式使钢板和混凝土协同工作。然而,这种连接方式可能导致整体性和塑性变形效率较低,且制作复杂,焊接多腔双钢板-混凝土组合剪力墙能够有效地避免这些问题。为了深入研究焊接多腔双钢板-混凝土组合剪力墙的抗震性能,基于约束混凝土真三轴塑性-损伤本构模型和钢材弹塑性混合强化-韧性损伤本构模型,建立了组合剪力墙的精细化三维实体-壳模型,将模拟所得的滞回曲线、骨架曲线、刚度退化曲线、弹性刚度、承载力、累积耗能、等效阻尼粘滞系数和延性系数与已有拟静力试验结果相比较,发现两者吻合较好。分析结果表明:轴压比对组合剪力墙模型算例刚度和承载力的影响较小,而随剪跨比增大,组合剪力墙模型算例的刚度和承载力呈线性降低;轴压比对组合剪力墙模型算例总塑性耗能的影响较小,而剪跨比的影响较大,剪力墙总塑性耗能随剪跨比增大而降低;轴压比和剪跨比都不会改变算例各部件的耗能分配机制,即组合剪力墙模型算例以外钢板和内隔板耗能为主。

低周反复荷载下T型双波纹钢板混凝土组合剪力墙受力性能试验研究

为研究低周反复荷载下T型双波纹钢板混凝土组合剪力墙的受力性能,对5个T型双波纹钢板混凝土组合剪力墙进行了低周反复加载试验。基于试验数据,分析了T型组合剪力墙的破坏模式、滞回曲线、变形能力及耗能能力,重点研究了边缘约束条件、波纹类型以及轴压比不同变化参数对T型组合剪力墙抗震性能指标的影响规律。研究结果表明:T型双波纹钢板混凝土组合剪力墙破坏模式主要有压屈破坏和压弯破坏两种;设置边缘约束构件是提高T型双波纹钢板混凝土组合剪力墙承载能力和变形能力的关键因素;纵向窄波纹钢板对内部混凝土的约束能力更强,在低周反复荷载下两者协同工作性更优,而横向窄波纹钢板试件强度退化最严重;采用全截面塑性设计方法进行T型双波纹钢板混凝土组合剪力墙正截面承载力计算,试验值与计算值吻合良好;T型双波纹钢板混凝土组合剪力墙具有较好的承载能力和变形能力,可适用于高层及超高层建筑结构中。

近场爆炸下波纹双钢板混凝土组合墙板的损伤破坏及抗爆性能

相对于传统的钢筋混凝土墙板和平面双钢板-混凝土组合墙板(profiled double-skin composite wall,PDSCW),波纹双钢板-混凝土组合墙板(concrete-infilled double steel corrugatedplate wall,CDSCW)具有更高的轴向抗压承载力、更大的侧向抗弯刚度以及良好的抗冲击和抗震性能,在船舶和军事领域有广阔的应用前景。制作2种CDSCW试件,通过近场爆炸试验对比分析了2种试件的损伤模式及动态响应;采用ANSYS/LS-DYNA软件建立了CDSCW和PDSCW的有限元模型,研究了近场爆炸下2种混凝土组合墙板的损伤机理和爆炸响应,并与试验结果进行对比分析;分析了混凝土厚度、钢板厚度、药量对CDSCW抗爆性能的影响。结果表明:近场爆炸作用下,相较于PDSCW,相同混凝土方量和尺寸(长、宽)的CDSCW具有更大的抗弯刚度、更强的抗变形能力以及更优的抗爆性能;增加波纹深度能有效提高CDSCW的抗爆性能,可为抗爆构件设计和相关工程研究提供参考。

带PBL剪力键的钢芯板混凝土组合剪力墙低周往复加载试验研究

为研究带PBL剪力键的钢芯板混凝土组合剪力墙的抗震性能,对1个型钢混凝土组合剪力墙和4个钢芯板混凝土组合剪力墙进行了循环往复加载试验;观察带PBL剪力键的钢芯板混凝土组合剪力墙在水平循环荷载下的破坏全过程,并分析该类剪力墙的滞回特征、变形能力、承载能力、耗能性能、刚度和强度退化能力。结果表明:钢芯板混凝土组合剪力墙的破坏模式主要为弯曲型破坏,滞回曲线较为饱满;配置钢芯板的剪力墙承载力、延性性能和耗能能力较优;PBL剪力键的构造方式可保证钢芯板与混凝土之间的黏结性能完好,PBL剪力键平放会导致剪力墙出现沿PBL剪力键的水平通缝,影响剪力墙承载能力的发挥,建议采用PBL剪力键竖放的构造形式。

大壁厚不锈钢复合板压力容器建造关键技术及应用

在大壁厚不锈钢复合板压力容器的建造过程中,通过深入研究其技术要点和难点,优化焊接接头结构设计,成功形成了一套完整的新型建造关键技术。这套技术不仅优化了焊接接头结构,还创新了一系列施工方法,包括筒体加热卷制、接头坡口机加工、接管内壁耐蚀层TIG/FCAW自动堆焊、不锈钢衬管液氮冷套、球形封头内壁耐蚀层带极埋弧堆焊、纵环缝窄间隙埋弧自动焊以及管口接头马鞍型埋弧焊等。这些新型建造关键技术的应用,在提高压力容器质量效果的同时,也带来了显著的经济效益,为行业同类型设备的建造提供借鉴。在未来的研究中,可以进一步探索这些技术在其他领域的应用,以实现更广泛的技术交流和合作。同时,对于大壁厚不锈钢复合板压力容器的建造,仍需不断深入研究其材料特性、工艺参数和施工方法,以不断提高设备的性能和安全性。

温度影响下不同轴压比双钢板混凝土组合剪力墙抗震性能

研究不同温度环境下不同轴压比双钢板混凝土组合剪力墙的抗震性能,以温度(40、20、-40℃)和轴压比(n=0.3、0.4、0.5、0.6)为控制参数,设计了12片剪力墙。利用ABAQUS对双钢板组合剪力墙试验进行对比验证,验证有限元结果的准确性。通过对12个剪力墙的承载能力、塑性变形能力、耗能能力、延性对比分析,探究其在代表性温度环境下轴压比对试件的抗震性能变化规律。结果表明,在相同的温度环境下,随着轴压比的增加,剪力墙的承载能力增加,延性降低。轴压比对于刚度退化的影响不明显。在20℃环境下,剪力墙的延性好于40和-40℃环境下延性。-40℃环境下,剪力墙的承载能力高于40和20℃环境。

装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙轴压性能研究

提出一种装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙,设计3个具有不同配筋形式和混凝土种类的墙板试件进行轴心受压试验,获得墙板在轴压作用下的破坏模式、荷载-位移曲线、荷载-应变曲线、承载力储备系数、延性系数、材料利用率等性能指标。通过ABAQUS有限元分析软件对墙板进行参数化分析,研究内嵌钢板强度和厚度对其轴压性能的影响。结果表明,墙板具有良好的承载力储备能力和延性性能;混凝土中掺入1%体积比的钢纤维可显著提高墙板内混凝土的抗拉性能,使混凝土强度得到更加充分的利用,布置钢筋可以显著提高墙板延性;墙板的承载力和延性随内嵌钢板厚度和强度的增加而增大,强度为Q355、厚度为4、6mm时,墙板材料利用率更高。提出适用于该类墙板的轴压承载力设计公式,考虑钢板屈曲和截面组合效应的墙板轴心受压承载力设计公式计算结果较精确。

双钢板混凝土组合墙偏心受压性能试验研究

为了研究双钢板混凝土组合墙在偏心受压荷载下的结构性能,设计制作了5个试件,以偏心距离和墙板厚度作为研究参数,进行偏心受压试验.利用ABAQUS软件对试件进行有限元分析,并采用截面分析法计算试件在轴力与弯矩共同作用下的截面承载力.试验结果表明,试件最终出现钢板局部屈曲与混凝土受压破坏.根据试验荷载-位移曲线,计算得到试件延性系数为1.28~1.92.墙厚相同时,随着加载偏心距离的增加,承载力逐渐下降.偏心距离相同时,增加墙体厚度可以有效提高试件承载能力.偏心受压试件的截面应变分布满足平截面假定.承载力试验值与有限元模型计算值和理论计算值的最大误差分别为4%和9%.

壁式钢管混凝土柱-钢梁嵌入式双侧板节点抗震性能研究及设计建议

以壁式钢管混凝土柱-钢梁嵌入式双侧板节点为研究对象,进行两个足尺试件的拟静力试验,分析节点的破坏模式、滞回曲线、骨架曲线,并研究节点承载力、延性、耗能能力和刚度退化等指标。试验结果表明:试件破坏模式分别为侧板外梁端形成塑性铰、节点核心区侧板开裂及轻微鼓曲;试件滞回曲线稳定饱满,曲线呈现梭形,试件延性系数为3.11~3.53,等效黏滞阻尼系数大于0.4,具有良好的耗能能力;刚度退化较稳定,具备较好的抗侧能力。在验证有限元模型合理的基础上,通过有限元变参分析此类节点的滞回性能,结果表明:增加侧板厚度或侧板外伸长度可提高嵌入式双侧板节点的承载力及延性。最后结合试验和有限元变参分析结果,针对此类节点提出设计建议。

轴压荷载作用下双钢板-混凝土组合剪力墙中钢板屈曲性能研究

双钢板-混凝土组合剪力墙作为建筑物中的抗侧力构件,具有承载力高、耗能能力强和延性好等优点。在高层和超高层建筑结构中,双钢板-混凝土组合剪力墙需要承担一定的竖向荷载,钢板在正常使用阶段要求不发生弹性屈曲。钢板初始几何缺陷是影响双钢板-混凝土组合剪力墙轴压荷载下钢板屈曲应力的重要指标,而在以往的研究中,钢板屈曲应力的计算方法并未予以考虑。基于前期的双钢板-混凝土组合剪力墙轴压试验研究,采用分析软件ABAQUS建立了双钢板-混凝土组合剪力墙轴压试件有限元模型,模型中引入了钢板的初始几何缺陷,从钢板屈曲应变、荷载-位移曲线和破坏模态等方面与试验结果进行对比,验证了模型分析结果的合理性。在此基础上进行参数分析,系统研究了钢板初始几何缺陷、钢板距厚比和钢材屈服强度等参数对钢板屈曲性能的影响规律,基于试验和数值模拟分析结果,提出了考虑钢板初始几何缺陷影响的双钢板-混凝土组合剪力墙钢板屈曲应力计算方法。

Comparison of microstructure and mechanical properties of titanium/ steel composite plates by two manufacturing processes

Two types of titanium/steel composite plates with the same thickness were manufactured by parallel explosive welding and double vertical explosive welding and rolling, respectively. The comparative analysis of microstructure showed that the interface of double vertical explosive welding plate （B plate） tended to be straight while the interface of parallel explosive welding plate （A plate） was wavy bonding. Defects near the interface of B plate were extruded, and the thickness of the diffusion layer of B plate was thicker under the effects of preheating temperature and press-working. Comparative tests of mechanical properties indicated that the tensile shear strength of B plate was lower while its micro-hardness was higher. Specimens of these two types of plates were neither separated nor cracked after bending up to 180° in the three-point bending test. From the microstructural observation of tensile fracture characteristics, A plate had strong toughness fracture while B plate had mainly ductile fracture with cleavage fracture as the supplement. Macroscopically, the tensile strength of the latter was 7.9% less than that of the former. However, both satisfied the Chinese standard of tensile strength.

巨型钢框架-双钢板组合剪力墙住宅体系力学性能探究

在巨型结构体系的基础上提出巨型钢框架-双钢板组合剪力墙住宅体系。基于实际超高层混凝土住宅工程背景建立高度为156 m的计算模型,对其进行弹性反应分析及弹塑性时程分析以评估结构力学性能。通过对比主次结构不同的连接假定,探究主次结构连接方式对于结构整体性能及关键结构构件的影响。基于ABAQUS软件分析了次结构与双钢板组合剪力墙之间采用不同连接方式对剪力墙各部件的影响。最后对该结构体系进行经济性分析。研究结果表明:该结构体系能满足建筑户型无柱大空间设计要求且具有优良的力学性能和经济性指标,在设计中主、次结构连接推荐采用铰接连接。研究结果可为巨型钢框架-双钢板组合剪力墙结构的设计提供参考。

钢板-混凝土组合剪力墙裂缝控制及监测分析

以实际工程为背景,对1.7 m厚钢板-混凝土组合剪力墙的裂缝控制及监测进行分析。大体积混凝土构件,由于其水化热比较高容易产生温度裂缝,基于此首先对原材料及配合比进行优化设计,降低混凝土水化热。然后对大厚度组合剪力墙浇筑后采取合理的养护措施控制其内部温度以及对裂缝发生情况进行实测分析,最后经过一系列针对性的裂缝控制措施及监测结果表明,采用优化设计对大厚度组合剪力墙的裂缝控制优于同类工程的裂缝控制效果。