In this paper, the concept of incorporating core–shell structured units as secondary phases totoughen Al_(2)O_(3) ceramics is proposed. Al_(2)O_(3) composite ceramics toughened by B_(4)C@TiB_(2) core–shellunits are ...In this paper, the concept of incorporating core–shell structured units as secondary phases totoughen Al_(2)O_(3) ceramics is proposed. Al_(2)O_(3) composite ceramics toughened by B_(4)C@TiB_(2) core–shellunits are successfully synthesized using a combination of molten salt methodology and spark plasmasintering. The synthesis of B_(4)C@TiB_(2) core–shell toughening units stems from the prior production ofcore–shell structural B_(4)C@TiB_(2) powders, and this core–shell structure is effectively preserved withinthe Al_(2)O_(3) matrix after sintering. The B_(4)C@TiB_(2) core–shell toughening unit consists of a micron-sizedB4C core enclosed by a shell approximately 500 nm in thickness, composed of numerous nanosizedTiB2 grains. The regions surrounding these core–shell units exhibit distinct geometric structures andencompass multidimensional variations in phase composition, grain dimensions, and thermal expansioncoefficients. Consequently, intricate stress distributions emerge, fostering the propagation of cracks inmultiple dimensions. This behavior consumes a considerable amount of crack propagation energy,thereby enhancing the fracture toughness of the Al_(2)O_(3) matrix. The resulting Al_(2)O_(3) composite ceramicsdisplay relative density of 99.7%±0.2%, Vickers hardness of 21.5±0.8 GPa, and fracture toughness6.92±0.22 MPa·m1/2.展开更多
Ca-α/β-SiAlON composites were prepared using Ca-α/β-SiAlON powder synthesized from gold ore tailings, which contained abundant Si and Al elements as the major raw materials together with minor additives, through a...Ca-α/β-SiAlON composites were prepared using Ca-α/β-SiAlON powder synthesized from gold ore tailings, which contained abundant Si and Al elements as the major raw materials together with minor additives, through a pressure-less sintering method. The influ- ences of sintering temperature on the phase composition and mierostrueture of the composites were analyzed. The scanning electron micros- copy images of the composites show the interlacing of grains with elongated columnar, short columnar and plate-like morphologies. The composites sintered at 1520℃ for 6 h have a flexural strength of 352 MPa, Vickers hardness of 11.2 GPa, and fracture toughness of 4.8 MPa·m1/2. The relative content of each phase in the products is I（Ca-α-SiAION）：I（β-SiAlON）：I（Fe3Si） = 23：74：3, where Ii stands for the dif- fraction peak intensity of phase i.展开更多
A novel metal matrix composites(MMC)with Mg matrix reinforced with natural filler in the form of Didymosphenia geminata frustules(algae with distinctive siliceous shells)are presented in this work.Pulse plasma sinteri...A novel metal matrix composites(MMC)with Mg matrix reinforced with natural filler in the form of Didymosphenia geminata frustules(algae with distinctive siliceous shells)are presented in this work.Pulse plasma sintering(PPS)was used to manufacture Mg-based composites with 1,5 and 10 vol.%ceramic filler.As a reference,pure Mg was sintered.The results show that the addition of 1 vol.%Didymosphenia geminata frustules to the Mg matrix increases its corrosion resistance by supporting passivation reactions,and do not affect the morphology of L929 fibroblasts.Addition of 5 vol.%the filler does not cause cytotoxic effects,but it supports microgalvanic reactions leading to the greater corrosion rate.Higher content than 5 vol.%the filler causes significant microgalvanic corrosion,as well as increases cytotoxicity due to the greater micro-galvanic effect of the composites containing 10 and 15 vol.%diatoms.The results of contact angle measurements show the hydrophilic character of the investigated materials,with slightly increase in numerical values with addition of amount of ceramic reinforcement.The addition of Didymosphenia geminata frustules causes changes in a thermo-elastic properties such as mean apparent value of coefficient of thermal expansion(CTE)and thermal conductivity(λ).The addition of siliceous reinforcement resulted in a linear decrease of CTE and reduction in thermal conductivity over the entire temperature range.With the increasing addition of Didymosphenia geminata frustules,an increase in strength with a decrease in compressive strain is observed.In all composites an increase in microhardness was attained.The results clearly indicate that filler in the form of Didymosphenia geminata frustules may significantly change the most important properties of pure Mg,indicating its wide potential in the application of Mg-based composites with a special focus on biomedical use.展开更多
基金This work was financially supported by the Natural Science Foundation of Hebei Province(Nos.E2021402004,F2020402010,and E2020402075)Central Government Guided Local Science and Technology Development Fund Project(No.226Z1101G)+1 种基金Three Talent Project of Hebei Province(No.A202101019)Postgraduate Innovation Ability Training funding Project of Hebei Province(No.CXZZSS2023120).
文摘In this paper, the concept of incorporating core–shell structured units as secondary phases totoughen Al_(2)O_(3) ceramics is proposed. Al_(2)O_(3) composite ceramics toughened by B_(4)C@TiB_(2) core–shellunits are successfully synthesized using a combination of molten salt methodology and spark plasmasintering. The synthesis of B_(4)C@TiB_(2) core–shell toughening units stems from the prior production ofcore–shell structural B_(4)C@TiB_(2) powders, and this core–shell structure is effectively preserved withinthe Al_(2)O_(3) matrix after sintering. The B_(4)C@TiB_(2) core–shell toughening unit consists of a micron-sizedB4C core enclosed by a shell approximately 500 nm in thickness, composed of numerous nanosizedTiB2 grains. The regions surrounding these core–shell units exhibit distinct geometric structures andencompass multidimensional variations in phase composition, grain dimensions, and thermal expansioncoefficients. Consequently, intricate stress distributions emerge, fostering the propagation of cracks inmultiple dimensions. This behavior consumes a considerable amount of crack propagation energy,thereby enhancing the fracture toughness of the Al_(2)O_(3) matrix. The resulting Al_(2)O_(3) composite ceramicsdisplay relative density of 99.7%±0.2%, Vickers hardness of 21.5±0.8 GPa, and fracture toughness6.92±0.22 MPa·m1/2.
基金financially supported by the National Key Technologies R&D Program of China(No.2011BAB03B05)the S&T Program of Liaoning Provincial Education Department(No.L2011078)the S&T Program of the Ministry of Housing and Urban-Rural Development,China(No.2013-K4-8)
文摘Ca-α/β-SiAlON composites were prepared using Ca-α/β-SiAlON powder synthesized from gold ore tailings, which contained abundant Si and Al elements as the major raw materials together with minor additives, through a pressure-less sintering method. The influ- ences of sintering temperature on the phase composition and mierostrueture of the composites were analyzed. The scanning electron micros- copy images of the composites show the interlacing of grains with elongated columnar, short columnar and plate-like morphologies. The composites sintered at 1520℃ for 6 h have a flexural strength of 352 MPa, Vickers hardness of 11.2 GPa, and fracture toughness of 4.8 MPa·m1/2. The relative content of each phase in the products is I（Ca-α-SiAION）：I（β-SiAlON）：I（Fe3Si） = 23：74：3, where Ii stands for the dif- fraction peak intensity of phase i.
基金Izabela B.Zgłobicka acknowledges the funding provided by National Science Center for providing financial support to project Metal Matrix Composites with natural filler(Grant No.2018/31/D/ST8/00890).The authors are grateful to Dr Matt P.Ashworth from the University of Texas at Austin(USA)for critically reading the manuscript and correcting the language.
文摘A novel metal matrix composites(MMC)with Mg matrix reinforced with natural filler in the form of Didymosphenia geminata frustules(algae with distinctive siliceous shells)are presented in this work.Pulse plasma sintering(PPS)was used to manufacture Mg-based composites with 1,5 and 10 vol.%ceramic filler.As a reference,pure Mg was sintered.The results show that the addition of 1 vol.%Didymosphenia geminata frustules to the Mg matrix increases its corrosion resistance by supporting passivation reactions,and do not affect the morphology of L929 fibroblasts.Addition of 5 vol.%the filler does not cause cytotoxic effects,but it supports microgalvanic reactions leading to the greater corrosion rate.Higher content than 5 vol.%the filler causes significant microgalvanic corrosion,as well as increases cytotoxicity due to the greater micro-galvanic effect of the composites containing 10 and 15 vol.%diatoms.The results of contact angle measurements show the hydrophilic character of the investigated materials,with slightly increase in numerical values with addition of amount of ceramic reinforcement.The addition of Didymosphenia geminata frustules causes changes in a thermo-elastic properties such as mean apparent value of coefficient of thermal expansion(CTE)and thermal conductivity(λ).The addition of siliceous reinforcement resulted in a linear decrease of CTE and reduction in thermal conductivity over the entire temperature range.With the increasing addition of Didymosphenia geminata frustules,an increase in strength with a decrease in compressive strain is observed.In all composites an increase in microhardness was attained.The results clearly indicate that filler in the form of Didymosphenia geminata frustules may significantly change the most important properties of pure Mg,indicating its wide potential in the application of Mg-based composites with a special focus on biomedical use.
