Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering th...Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering them incapable of effectively inhibiting the exchange reaction between lithium ions and transition metal ions in the electrolyte.Consequently,nearly all lithium ions within the SEI film are replaced by transition metal ions,resulting in an increase in interphacial impedance and a decrease in stability.Herein,we demonstrate that the SEI film,constructed by fluoroethylene carbonate(FEC)additive rich in crystalline Li F,effectively inhibits the undesired Li^(+)/Co^(2+)ion exchange reaction,thereby suppressing the deposition of cobalt compounds and metallic cobalt.Furthermore,the deposited cobalt compounds exhibit enhanced structural stability and reduced catalytic activity with minimal impact on the interphacial stability of the graphite anode.Our findings reveal the crucial influence of SEI film composition and structure on the deposition and hazards associated with transition metal ions,providing valuable guidance for designing next-generation electrolytes.展开更多
The technique of Farmer Managed Natural Regeneration (FMNR) is being promoted as a cost-effective approach for restoring degraded arable dry lands. Its effectiveness has been observed in many countries across the glob...The technique of Farmer Managed Natural Regeneration (FMNR) is being promoted as a cost-effective approach for restoring degraded arable dry lands. Its effectiveness has been observed in many countries across the globe, where it is a traditional practice, and is now being encouraged across the African continent. This study aimed to evaluate the impact of FMNR on floristic Composition, Vegetation Structure, and Regeneration Status of woody Plant Species in the severely degraded Central Rift, Kenya. The study systematically assessed how FMNR influenced species composition, vegetation structure and regeneration status from two sample plots involved in FMNR practices. Transect lines and quadrats methods were utilized to collect data, specifically regarding the floristic composition, vegetation structure, and regeneration status of woody plant species. Quadrats and sub-quadrats of varying sizes (10 m by 10 m, 5 m by 5 m, and 1 m by 1 m) were nested along the transect lines for data collection. Furthermore, measurements of tree growth and development, including root collar diameter, diameter at breast height (D<sub>130</sub>) and heights within the study blocks, were taken. The data was then analyzed using R-software. Results showed a marked progressive increase in numbers of trees, saplings, seedlings, shrubs and herbs in all FMNR sites and reductions in all non-FMNR sites. The study advocates for widespread promotion of the FMNR practice both as an environmental conservation and restoration strategy.展开更多
The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in orde...The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.展开更多
The microwave treatment is commonly applied to flaxseed to release nutrients, inactivate enzymes, remove cyanogens,and intensify flavors. The current study aimed to explore the influences of microwave exposure on the ...The microwave treatment is commonly applied to flaxseed to release nutrients, inactivate enzymes, remove cyanogens,and intensify flavors. The current study aimed to explore the influences of microwave exposure on the antioxidant and interfacial properties of flaxseed protein isolates(FPI), focusing on the altering composition and molecular structure.The results showed that after microwave exposure(700 W, 1–5 min), more compact assembly of storage proteins and subsequent permeation by membrane fragments of oil bodies occurred for cold-pressing flaxseed flours. Moreover, the particle sizes of FPI was progressively reduced with the decrement ranged from 37.84 to 60.66%(P<0.05), whereas the zeta potential values initially decreased and then substantially recovered during 1–5 min of microwave exposure. The conformation unfolding, chain cross-linking, and depolymerization were sequentially induced for FPI based on the analysis of fluorescence emission spectra, secondary structure, and protein subunit profiles, thereby affecting the dispersion or aggregation properties between albumin and globulin fractions in FPI. Microwave exposure retained specific phenolic acids and superior in vitro antioxidant activities of FPI. The inferior gas–water interface absorption and the loose/porous assembly structure were observed for the foams prepared by FPI, concurrent with obviously shrinking foaming properties upon microwave exposure. Improving oil–water interface activities of FPI produced the emulsion droplets with descending sizes and dense interface coating, which were then mildly destabilized due to the lipid leakage and weakened rheological behavior with microwave exposure extended to 5 min. Our findings elucidated that microwave treatment could tailor the application functionality of protein fractions in flaxseed based on their in situ structural remodeling.展开更多
A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples mu...A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples must be investigated.This paper examines the deformation characteristics and damage evolution of six types of BPB composite samples using a digital speckle correlation method under uniaxial compression conditions.A new damage evolution equation was established on the basis of the input strain energy and dissipated strain energy at the peak stress.The prevention and control mechanisms of the backfilling body on the coal pillar instability were discussed.The results show that the deformation localization and macroscopic cracks of the BPB composite samples first appeared at the coal-backfilling interface,and then expanded to the backfilling elements,ultimately appearing in the coal elements.The elastic strain energy in the BPB composite samples reached a maximum at the peak stress,whereas the dissipated energy continued to accumulate and increase.The damage evolution curve and equation agree well with the test results,providing further understanding of instability prevention and the control mechanisms of the BPB composite samples.The restraining effect on the coal pillar was gradually reduced with decreasing backfilling body element's volume ratio,and the BPB composite structure became more vulnerable to failure.This research is expected to guide the design,stability monitoring,instability prevention,and control of BPB structures in pillar-side cemented paste backfilling mining.展开更多
On the basis of a one-by-one latitude-longitude grid three-dimensional seismic velocity model, the crustal P-wave velocity structure in eastern China (105-125°E and 18-41°N) is obtained, and a set of geother...On the basis of a one-by-one latitude-longitude grid three-dimensional seismic velocity model, the crustal P-wave velocity structure in eastern China (105-125°E and 18-41°N) is obtained, and a set of geotherms for each grid is established for P-T correction on P-wave velocities. The average depths of sub-crustal layers and their average P-wave velocities of 18 tectonic units in eastern China are exhibited. Our result presents a 32-34 km thick crust beneath eastern China, which is thinner than previous studies, with an average velocity of 6.54 km/s, corresponding to a 5 kg/m3 variation in crustal mean density. The thicker upper but thinner middle and lower crust results in a lower average seismic velocity of eastern China. An intermediate crustal composition with a SiO2 content of 59.7 wt% has been estimated. However, there exists a significant lateral variation in the crustal structures among the tectonic units of eastern China. The structure and composition features of some regions in eastern China indicate that extension has played an important role in the continental crust evolution of eastern China.展开更多
Beech (Fagus orientalis Lipsky) forest covers about 565,000 ha of land in Guilan province, north of Iran and forms a major carbon pool. It is an important economic, soil protection and recreation resource. We studie...Beech (Fagus orientalis Lipsky) forest covers about 565,000 ha of land in Guilan province, north of Iran and forms a major carbon pool. It is an important economic, soil protection and recreation resource. We studied long-term effects of fire on the structure and composition 37 years after fire occurrence in these forests. To do this research, we selected 85 ha burned and 85 ha unburned beech forests). The results indicated that the fire had not changed the overall uneven-aged structure, but it changed forest composition from pure stands to mixed stands that now include species such as Carpinus betulus, Acer cappadocicum and Alnus subcordata. The density of trees and regeneration was significantly increased, while the density of shrubs significantly decreased. The main reasons for increased tree regeneration were attributed to (1) reduction of litter depth, and (2) increase in available light from opening of the canopy and reduction in shrub competition. It is apparent that the forest is on a path to return to its natural state before the fire after 37 years.展开更多
Data from three cruises conducted in the Zhujiang River (ZR), coastal waters of Guangdong (CWGD) and the northern South China Sea (NSCS) during 2003 and 2004 were examined for assessing the relative importance o...Data from three cruises conducted in the Zhujiang River (ZR), coastal waters of Guangdong (CWGD) and the northern South China Sea (NSCS) during 2003 and 2004 were examined for assessing the relative importance of pigment composition and packaging effect in modifying the specific absorption coefficients of phytoplankton. The three survey regions differ widely in their phytoplankton community with large cells dominating the ZR and CWGD waters and small cells dominating the NSCS region. Variations in the size structure and the accessory pigments have much effect on the chlorophyll a-specific absorption coefficient of phytoplankton. The size index accounted for about 42% and 33% of the variation of the specific absorption coefficient at 440 and 675 nm, respectively. Using the multiple regression analysis approach, pigment concentrations for each sample were calculated. The accessory pigments other than chlorophyll a contribute to absorption mainly in the blue - to - green region of the spectrum and their absorptions account for about 44%, 43% and 53% on the average of the total phytoplankton absorption at 440 nm for the ZR, CWGD and NSCS regions. Among the accessory pigments, the photosynthetic carotenoids (noted PSC) play a dominant role in the ZR and CWGD waters, while in the NSCS the nonphotosynthetic carotenoids (noted PPG) as well as PSC have important contributions. Because the variations of both the size structure and accessory pigments in algal populations contributed to the variability of the specific absorption coefficient in the study regions, these factors may be considered explicitly in future bio - optical algorithms to derive chlorophyll a concentration more accurately.展开更多
It was shown by TEM and X-ray analysis that there are four types of grains of the main Ni3Al phase in the structure of the intermetallic obtained by the self-propagation high temperature method (SHS). Every type of gr...It was shown by TEM and X-ray analysis that there are four types of grains of the main Ni3Al phase in the structure of the intermetallic obtained by the self-propagation high temperature method (SHS). Every type of grains has its own domain and dislocation structure. There are mono- and polydomains with and without dislocations. The grains of the main phase of monoand polydomains without dislocations and polydomains with dislocations were formed by diffusion in the solid phase. In these conditions NiAl3 phase is located on the grain boundary of the main phase. The Ni2Al3 phase is located at the triple joints of the main phase.展开更多
The Andean forests of northern Ecuador are known for their high levels of plant diversity relative to the area they occupy.Typically,these forests grow on steep slopes that lead to dramatic habitat gradients across sh...The Andean forests of northern Ecuador are known for their high levels of plant diversity relative to the area they occupy.Typically,these forests grow on steep slopes that lead to dramatic habitat gradients across short distances.These extreme habitat gradients make the Andean forest ecosystem an excellent natural laboratory for understanding the effect of elevation on forest community diversity,structure and composition.We established 31 plots(50 m×5 m)which are divided between two elevational transects in the cloud forest of the Siempre Verde Reserve in the western foothills of the Andes Mountains of northern Ecuador.All trees and tree ferns with a diameter at breast height(dbh)≥5 cm were measured and identified.We examined changes in community composition,structure,and diversity along and between the elevational transects and three elevational zones:low(2437–2700 m),middle(2756–3052 m),and high(3163–3334 m).We found four main trends associated with the elevational gradients at this site:(1)community composition differed between the two transects and among the three elevational zones according to N-MDS,ANOSIM,and percentage of shared species,with some species having limited distributions,(2)metrics of community structure showed opposite relationships with elevation,depending on the transect,with the only significant relationship(negative)found between basal area and elevation in the open trail transect,(3)alpha diversity,in general,peaked at mid-elevations,and(4)beta diversity consistently increased with distance between plots along elevation.The complexity of changes in community composition,structure,and alpha diversity along elevation may be related to the heterogeneity of the environment on a local scale,such as topography,soil composition,and even human impact,or to dispersal limitation and should be investigated further.These changes in community composition and the relatively high beta diversity found at this site exemplify the biological complexity of montane forest,reinforcing arguments from other studies on the importance of their conservation.展开更多
(1-x)MnFe_(2)O_(4)(MFO)/xZnMn_(2)O_(4)(ZMO)(x=0,0.2,0.5,0.8,and 1.0)nanocomposite samples were prepared using co-precipitation procedure.The phase percentage,cell parameters,and crystallite size of MFO and ZMO phases ...(1-x)MnFe_(2)O_(4)(MFO)/xZnMn_(2)O_(4)(ZMO)(x=0,0.2,0.5,0.8,and 1.0)nanocomposite samples were prepared using co-precipitation procedure.The phase percentage,cell parameters,and crystallite size of MFO and ZMO phases in each nanocomposite sample were calculated using Rietveld refinement procedure.The x-ray diffraction(XRD)analysis and Fourier-transform infrared spectroscopy techniques established the variation in the lattice parameters of each phase are due to permutation of all cations among the octahedral and tetrahedral sites of MFO and ZMO.The different oxidation states of different ions in all samples were determined using x-ray photoelectron spectroscopy(XPS)technique.The variation in absorbance of the nanocomposite samples with composition parameter(x)is dependent on the wavelength region.The optical bandgap of the nanocomposite samples is decreased as the content of ZMO phase increased.The effect of alloying on the refractive index,extinction coefficient,dielectric constant,optical conductivity,and the nonlinear optical behaviors of all samples were studied in detail.The nanocomposite sample x=0.5 disclosed upgraded optical parameters with the highest refractive index,optical conductivity,and PL intensity,which nominate it to be functional in various application fields.展开更多
The X56 steel samples was corroded in the medium of salt water solution at the conditions of CO2 partial pressure POM 0.5 to 2.0 MPa, temperature 80 °C and flow rate 1.4m/s. Corrosion weigh loss, composition and ...The X56 steel samples was corroded in the medium of salt water solution at the conditions of CO2 partial pressure POM 0.5 to 2.0 MPa, temperature 80 °C and flow rate 1.4m/s. Corrosion weigh loss, composition and structure, morphology and phase of corrosion films of the samples were investigate by SEM, EDS, XRD and XPS. The results indicated that the corrosion degree was accelerated with increasing POM ? The intense localised corrosion occurred on the surface of samples. The corrosion films mainly comprised of FeCO3 and complex phase products (Fe, Ca....)COj. There exists serious pitting on the metal substrates under the corrosion film. The theoretic and experimental analyses indicate this is caused by existed micropores or micro holes in films, which have the function of mass transportation.展开更多
Dry evergreen montane forests in Ethiopia are severely threatened.The status of species composition and structure of forest vegetation are important indicators to understand the trends of threats on local plant commun...Dry evergreen montane forests in Ethiopia are severely threatened.The status of species composition and structure of forest vegetation are important indicators to understand the trends of threats on local plant communities.In the present study,we examined the floristic composition and structure of the Kibate Forest,Wonchi Highland,Ethiopia along environmental gradients.Sixty-six(30 m×30 m)plots were established every 100 m interval along altitudinal gradients(2811‒3073 m a.s.l.)in five transect lines for vegetation and environmental data collection.In total,125 vascular plant species belonging to 104 genera and 52 families were identified.Eighteen species(14%)were endemic to Ethiopia and Eritrea.The two most dominant families,Asteraceae(29 species)and Lamiaceae(eight species)accounted for 30%of the total number of species.The highest number of species(54%)was herbs.Four major community types(viz.,Olinia rochetiana-Myrsine melanophloeos,Ilex mitis-Galiniera saxifraga,Erica arborea-Protea gaguedi,and Hagenia abyssinica-Juniperus procera)were identified.The highest species richness,evenness,diversity,and importance value index were in community types 2 and 4.About 82%of the species and all endemic taxa except five were recorded in these two community types.The most dominant woody species were O.rochetiana,E.arborea,Olea europaea subsp.cuspidata,Myrica salicifolia,I.mitis var.mitis,and H.abyssinica with different patterns of population structure.The results show that there was a weak correlation between species richness and altitude.Our findings confirm that environmental variables both with interactions(such as altitude)and without interactions(such as livestock grazing)significantly(p<0.05)affect species richness.Anthropogenic activities and overgrazing by livestock appear to be the main threat in community types 2 and 3.Urgent management practices and conservation measures such as prohibiting forest clearing and overgrazing and planting indigenous trees through community participation should be considered in community types that are rich in endemic species but are highly threatened.展开更多
The cold and dry boreal forests of the Southwest Yukon are dominated by white spruce (Picea glauca), trembling aspen (Populus tremuloides) and balsam poplar (Populus balsamifera), and the variability in structure and ...The cold and dry boreal forests of the Southwest Yukon are dominated by white spruce (Picea glauca), trembling aspen (Populus tremuloides) and balsam poplar (Populus balsamifera), and the variability in structure and composition of stands depends on the favourability of disturbance, climate and site conditions for stimulating regeneration. In this study, we investigated relationships between stand structure and ecological, climatic and disturbance factors in the southwest Yukon. We found that white spruce dominates mature forests across the landscape, but it is regenerating proportionately less than trembling aspen. Nevertheless, regeneration of all the three species was abundant following any type or severity of disturbance. Height and diameter of both species varied with several environmental variables, particularly site physiography. Mixed stands of aspen and white spruce were more productive than pure stands of aspen or spruce. However, overall productivity in mixed stand decreased when density of aspen was more than 1000 stems/ ha. These results suggested that mixed stands of deciduous and coniferous species where appropriate should be promoted maintaining aspen density below 1000 stems/ha as the productivity declined beyond this threshold. Similarly, we suggest carrying out selection harvesting of co-dominant trees and regular thinning of intermediate trees to promote the height and diameter growth of the remaining trees.展开更多
In order to identify a harvesting model which is beneficial for broadleaf-Korean pine mixed forest(BKF) sustainability, we investigated four types of harvested stands which have been logged with intensities of 0(T0, c...In order to identify a harvesting model which is beneficial for broadleaf-Korean pine mixed forest(BKF) sustainability, we investigated four types of harvested stands which have been logged with intensities of 0(T0, control), 15%(T1, low intensity), 35%(T2, moderate intensity), and 100%(T3, clear-cutting), and examined the impacts of logging intensity on composition and structure of these stands. Results showed that there were no significant differences between T0 and T1 for all structural characteristics, except for density of seeding and large trees. The mean diameter at breast height(DBH, 1.3 m above the ground), stem density and basal area of large trees in T2 were significantly lower than in T0, while the density of seedlings and saplings were significantly higher in T2 than in T0. Structural characteristics in T3 were entirely different from T0. Dominant tree species in primary BKF comprised 93%, 85%, 45% and 10% of the total basal area in T0, T1, T2 and T3, respectively. Three community similarity indices, the Jaccard′s similarity coefficient(CJ); the Morisita-Horn index(CMH); and the Bray-Curtis index(CN), were the highest for T0 and T1, followed by T0 and T2, and T0 and T3, in generally. These results suggest that effects of harvesting on forest composition and structure are related to logging intensities. Low intensity harvesting is conductive to preserving forest structure and composition, allowing it to recover in a short time period. The regime characterized by low logging intensity and short rotations appears to be a sustainable harvesting method for BKF on the Changbai Mountains.展开更多
The most of high/ultrahigh-pressure(HP/UHP)terranes of the world are characterized by the occurrence of numerous pods,lenses or layered blocks of eclogite and amphibolites(e.g.O’Brien,1997;Elvevold and Gilotti,2000;Z...The most of high/ultrahigh-pressure(HP/UHP)terranes of the world are characterized by the occurrence of numerous pods,lenses or layered blocks of eclogite and amphibolites(e.g.O’Brien,1997;Elvevold and Gilotti,2000;Zhang et al.,2003;and references there in).Field and petrological features suggest that amphibolites should展开更多
The abalone shell,a composite material whose cross-section is composed of inorganic and organic layers,has high strength and toughness.Inspired by the abalone shell,several multi-layer composite plates with different ...The abalone shell,a composite material whose cross-section is composed of inorganic and organic layers,has high strength and toughness.Inspired by the abalone shell,several multi-layer composite plates with different layer sequences and thicknesses are studied as bullet-proof material in this paper.To investigate the ballistic performance of this multi-layer structure,the complete characterization model and related material parameters of large deformation,failure and fracture ofAl_(2)O_(3)ceramics andCarbon Fiber Reinforced Polymer(CFRP)are studied.Then,3D finite element models of the proposed composite plates with different layer sequences and thicknesses impacted by a 12.7 mm armor-piercing incendiary(API)are built using Abaqus to predict failure.The simulation results show that the CFRP/Al2O3 ceramic/Ultrahigh Molecular Weight Polyethylene(UHMWPE)/CFRP(1 mm/4 mm/4 mm/1 mm)composite is the optimized stack of layers.The simulation results under specified layer sequence and thickness have a reasonable correlation with the experimental results and reflect the failure and fracture of the multi-layer composite protective armor.展开更多
Soft actuators have garnered substantial attention in current years in view of their potential appliances in diverse domains like robotics,biomedical devices,and biomimetic systems.These actuators mimic the natural mo...Soft actuators have garnered substantial attention in current years in view of their potential appliances in diverse domains like robotics,biomedical devices,and biomimetic systems.These actuators mimic the natural movements of living organisms,aiming to attain enhanced flexibility,adaptability,and versatility.On the other hand,angle-independent structural color has been achieved through innovative design strategies and engineering approaches.By carefully controlling the size,shape,and arrangement of nanostructures,researchers have been able to create materials exhibiting consistent colors regardless of the viewing angle.One promising class of materials that holds great potential for bioinspired soft actuators is MXenes in view of their exceptional mechanical,electrical,and optical properties.The integration of MXenes for bioinspired soft actuators with angle-independent structural color offers exciting possibilities.Overcoming material compatibility issues,improving color reproducibility,scalability,durability,power supply efficiency,and cost-effectiveness will play vital roles in advancing these technologies.This perspective appraises the development of bioinspired MXene-centered soft actuators with angleindependent structural color in soft robotics.展开更多
Flower-like copper foam Co_(3)O_(4) catalysts(Co_(3)O_(4)/CF) were prepared by hydrothermal method.The crystalline structure and microscopic morphology of the prepared samples were characterized by using X-ray diffrac...Flower-like copper foam Co_(3)O_(4) catalysts(Co_(3)O_(4)/CF) were prepared by hydrothermal method.The crystalline structure and microscopic morphology of the prepared samples were characterized by using X-ray diffractometer(XRD) and scanning electron microscope(SEM),and the electrochemical properties were investigated by an electrochemical workstation.The experimental results show that the Co_(3)O_(4) catalysts are successfully prepared on the foamed copper support by hydrothermal method,and the material’s morphology is mainly flower cluster.When the current density is 10 mA·cm^(-2),the overpotential value of the Co_(3)O_(4)/CF catalyst is 141 mV,lower than that of blank support.The electrochemical impedance(EIS) spectrum shows that the R_(ct )value of the Co_(3)O_(4)/CF catalyst decreases,and the Coulomb curves of double-layer show that the electrochemically active area of the Co_(3)O_(4)/CF catalyst efficiently increases compared with that of the blank support.Therefore,the as-obtained Co_(3)O_(4)/CF catalyst exhibits a good hydrogen evolution rate,showing great applicability potential in the catalytic electrolysis of water for hydrogen production.展开更多
基金supported by the National Natural Science Foundation of China(21972049,21573080)。
文摘Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering them incapable of effectively inhibiting the exchange reaction between lithium ions and transition metal ions in the electrolyte.Consequently,nearly all lithium ions within the SEI film are replaced by transition metal ions,resulting in an increase in interphacial impedance and a decrease in stability.Herein,we demonstrate that the SEI film,constructed by fluoroethylene carbonate(FEC)additive rich in crystalline Li F,effectively inhibits the undesired Li^(+)/Co^(2+)ion exchange reaction,thereby suppressing the deposition of cobalt compounds and metallic cobalt.Furthermore,the deposited cobalt compounds exhibit enhanced structural stability and reduced catalytic activity with minimal impact on the interphacial stability of the graphite anode.Our findings reveal the crucial influence of SEI film composition and structure on the deposition and hazards associated with transition metal ions,providing valuable guidance for designing next-generation electrolytes.
文摘The technique of Farmer Managed Natural Regeneration (FMNR) is being promoted as a cost-effective approach for restoring degraded arable dry lands. Its effectiveness has been observed in many countries across the globe, where it is a traditional practice, and is now being encouraged across the African continent. This study aimed to evaluate the impact of FMNR on floristic Composition, Vegetation Structure, and Regeneration Status of woody Plant Species in the severely degraded Central Rift, Kenya. The study systematically assessed how FMNR influenced species composition, vegetation structure and regeneration status from two sample plots involved in FMNR practices. Transect lines and quadrats methods were utilized to collect data, specifically regarding the floristic composition, vegetation structure, and regeneration status of woody plant species. Quadrats and sub-quadrats of varying sizes (10 m by 10 m, 5 m by 5 m, and 1 m by 1 m) were nested along the transect lines for data collection. Furthermore, measurements of tree growth and development, including root collar diameter, diameter at breast height (D<sub>130</sub>) and heights within the study blocks, were taken. The data was then analyzed using R-software. Results showed a marked progressive increase in numbers of trees, saplings, seedlings, shrubs and herbs in all FMNR sites and reductions in all non-FMNR sites. The study advocates for widespread promotion of the FMNR practice both as an environmental conservation and restoration strategy.
基金supported by the Learning & Academic Research Institution for Master’s and Ph.D. Students and Postdocs (LAMP) Program of the National Research Foundation of Korea (NRF) grant funded by the Ministry of Education (No. RS-2023-00285353)supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (NRF-2021R1A2C3006662, NRF-2022R1A5A1030054, and 2021R1A2C1091301)+3 种基金the support from Natural Sciences and Engineering Research Council of Canada (NSERC)Canada Foundation for Innovation (CFI)Atlantic Canada Opportunities Agency (ACOA)the New Brunswick Innovation Foundation (NBIF)
文摘The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.
基金the National Natural Science Foundation of China (32072267)the Wuhan Scientific and Technical Payoffs Transformation Project,China (2019030703011505)the Key Scientific Research Projects of Henan Province,China (2321021110139) for providing financial supports。
文摘The microwave treatment is commonly applied to flaxseed to release nutrients, inactivate enzymes, remove cyanogens,and intensify flavors. The current study aimed to explore the influences of microwave exposure on the antioxidant and interfacial properties of flaxseed protein isolates(FPI), focusing on the altering composition and molecular structure.The results showed that after microwave exposure(700 W, 1–5 min), more compact assembly of storage proteins and subsequent permeation by membrane fragments of oil bodies occurred for cold-pressing flaxseed flours. Moreover, the particle sizes of FPI was progressively reduced with the decrement ranged from 37.84 to 60.66%(P<0.05), whereas the zeta potential values initially decreased and then substantially recovered during 1–5 min of microwave exposure. The conformation unfolding, chain cross-linking, and depolymerization were sequentially induced for FPI based on the analysis of fluorescence emission spectra, secondary structure, and protein subunit profiles, thereby affecting the dispersion or aggregation properties between albumin and globulin fractions in FPI. Microwave exposure retained specific phenolic acids and superior in vitro antioxidant activities of FPI. The inferior gas–water interface absorption and the loose/porous assembly structure were observed for the foams prepared by FPI, concurrent with obviously shrinking foaming properties upon microwave exposure. Improving oil–water interface activities of FPI produced the emulsion droplets with descending sizes and dense interface coating, which were then mildly destabilized due to the lipid leakage and weakened rheological behavior with microwave exposure extended to 5 min. Our findings elucidated that microwave treatment could tailor the application functionality of protein fractions in flaxseed based on their in situ structural remodeling.
基金supported by the Shanxi Science and Technology Major Project (No.20201102004)the Distinguished Youth Funds of National Natural Science Foundation of China (No.51925402)+2 种基金the National Natural Science Foundation of China (Nos.52174125,52004171,and 51904203)the Outstanding Youth Cultivation Project in Shanxi Province,China (No.202103021222008)the Key Science and Technology Innovation Team of“1331”Project in Shanxi Province,China,and the Open Fund Project of Key Laboratory of Mining Disaster Prevention and Control (No.MDPC202004)。
文摘A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples must be investigated.This paper examines the deformation characteristics and damage evolution of six types of BPB composite samples using a digital speckle correlation method under uniaxial compression conditions.A new damage evolution equation was established on the basis of the input strain energy and dissipated strain energy at the peak stress.The prevention and control mechanisms of the backfilling body on the coal pillar instability were discussed.The results show that the deformation localization and macroscopic cracks of the BPB composite samples first appeared at the coal-backfilling interface,and then expanded to the backfilling elements,ultimately appearing in the coal elements.The elastic strain energy in the BPB composite samples reached a maximum at the peak stress,whereas the dissipated energy continued to accumulate and increase.The damage evolution curve and equation agree well with the test results,providing further understanding of instability prevention and the control mechanisms of the BPB composite samples.The restraining effect on the coal pillar was gradually reduced with decreasing backfilling body element's volume ratio,and the BPB composite structure became more vulnerable to failure.This research is expected to guide the design,stability monitoring,instability prevention,and control of BPB structures in pillar-side cemented paste backfilling mining.
基金supported by grants from the National Natural Science Foundation of China(No.40104003)China Post-doctoral Science Foundationthe Chinese Academy of Sciences K.C.Wong Post-doctoral Research Award
文摘On the basis of a one-by-one latitude-longitude grid three-dimensional seismic velocity model, the crustal P-wave velocity structure in eastern China (105-125°E and 18-41°N) is obtained, and a set of geotherms for each grid is established for P-T correction on P-wave velocities. The average depths of sub-crustal layers and their average P-wave velocities of 18 tectonic units in eastern China are exhibited. Our result presents a 32-34 km thick crust beneath eastern China, which is thinner than previous studies, with an average velocity of 6.54 km/s, corresponding to a 5 kg/m3 variation in crustal mean density. The thicker upper but thinner middle and lower crust results in a lower average seismic velocity of eastern China. An intermediate crustal composition with a SiO2 content of 59.7 wt% has been estimated. However, there exists a significant lateral variation in the crustal structures among the tectonic units of eastern China. The structure and composition features of some regions in eastern China indicate that extension has played an important role in the continental crust evolution of eastern China.
文摘Beech (Fagus orientalis Lipsky) forest covers about 565,000 ha of land in Guilan province, north of Iran and forms a major carbon pool. It is an important economic, soil protection and recreation resource. We studied long-term effects of fire on the structure and composition 37 years after fire occurrence in these forests. To do this research, we selected 85 ha burned and 85 ha unburned beech forests). The results indicated that the fire had not changed the overall uneven-aged structure, but it changed forest composition from pure stands to mixed stands that now include species such as Carpinus betulus, Acer cappadocicum and Alnus subcordata. The density of trees and regeneration was significantly increased, while the density of shrubs significantly decreased. The main reasons for increased tree regeneration were attributed to (1) reduction of litter depth, and (2) increase in available light from opening of the canopy and reduction in shrub competition. It is apparent that the forest is on a path to return to its natural state before the fire after 37 years.
基金This work was supported by the National Natural Science Foundation of China under contract Nos 40476019,40576078 and 5210266the Knowledge Innovation Program of the Chinese Academy of Sciences under contract No.KZCX2-YW-215.
文摘Data from three cruises conducted in the Zhujiang River (ZR), coastal waters of Guangdong (CWGD) and the northern South China Sea (NSCS) during 2003 and 2004 were examined for assessing the relative importance of pigment composition and packaging effect in modifying the specific absorption coefficients of phytoplankton. The three survey regions differ widely in their phytoplankton community with large cells dominating the ZR and CWGD waters and small cells dominating the NSCS region. Variations in the size structure and the accessory pigments have much effect on the chlorophyll a-specific absorption coefficient of phytoplankton. The size index accounted for about 42% and 33% of the variation of the specific absorption coefficient at 440 and 675 nm, respectively. Using the multiple regression analysis approach, pigment concentrations for each sample were calculated. The accessory pigments other than chlorophyll a contribute to absorption mainly in the blue - to - green region of the spectrum and their absorptions account for about 44%, 43% and 53% on the average of the total phytoplankton absorption at 440 nm for the ZR, CWGD and NSCS regions. Among the accessory pigments, the photosynthetic carotenoids (noted PSC) play a dominant role in the ZR and CWGD waters, while in the NSCS the nonphotosynthetic carotenoids (noted PPG) as well as PSC have important contributions. Because the variations of both the size structure and accessory pigments in algal populations contributed to the variability of the specific absorption coefficient in the study regions, these factors may be considered explicitly in future bio - optical algorithms to derive chlorophyll a concentration more accurately.
文摘It was shown by TEM and X-ray analysis that there are four types of grains of the main Ni3Al phase in the structure of the intermetallic obtained by the self-propagation high temperature method (SHS). Every type of grains has its own domain and dislocation structure. There are mono- and polydomains with and without dislocations. The grains of the main phase of monoand polydomains without dislocations and polydomains with dislocations were formed by diffusion in the solid phase. In these conditions NiAl3 phase is located on the grain boundary of the main phase. The Ni2Al3 phase is located at the triple joints of the main phase.
基金Pontificia Universidad Católica del Ecuador-Herbario QCA project“Fortalecimiento de la colección del Herbario QCA mediante inventarios botánicos enáreas de vacío de información florística,código K13-056”Siempre Verde Cloud Forest Reserve+1 种基金Columbus State Universitythe Lovett School for financial and logistic support。
文摘The Andean forests of northern Ecuador are known for their high levels of plant diversity relative to the area they occupy.Typically,these forests grow on steep slopes that lead to dramatic habitat gradients across short distances.These extreme habitat gradients make the Andean forest ecosystem an excellent natural laboratory for understanding the effect of elevation on forest community diversity,structure and composition.We established 31 plots(50 m×5 m)which are divided between two elevational transects in the cloud forest of the Siempre Verde Reserve in the western foothills of the Andes Mountains of northern Ecuador.All trees and tree ferns with a diameter at breast height(dbh)≥5 cm were measured and identified.We examined changes in community composition,structure,and diversity along and between the elevational transects and three elevational zones:low(2437–2700 m),middle(2756–3052 m),and high(3163–3334 m).We found four main trends associated with the elevational gradients at this site:(1)community composition differed between the two transects and among the three elevational zones according to N-MDS,ANOSIM,and percentage of shared species,with some species having limited distributions,(2)metrics of community structure showed opposite relationships with elevation,depending on the transect,with the only significant relationship(negative)found between basal area and elevation in the open trail transect,(3)alpha diversity,in general,peaked at mid-elevations,and(4)beta diversity consistently increased with distance between plots along elevation.The complexity of changes in community composition,structure,and alpha diversity along elevation may be related to the heterogeneity of the environment on a local scale,such as topography,soil composition,and even human impact,or to dispersal limitation and should be investigated further.These changes in community composition and the relatively high beta diversity found at this site exemplify the biological complexity of montane forest,reinforcing arguments from other studies on the importance of their conservation.
基金The authors acknowledge Taif University Research Supporting Project number(TURSP-2020/66)Taif University Taif,Saudi Arabia.
文摘(1-x)MnFe_(2)O_(4)(MFO)/xZnMn_(2)O_(4)(ZMO)(x=0,0.2,0.5,0.8,and 1.0)nanocomposite samples were prepared using co-precipitation procedure.The phase percentage,cell parameters,and crystallite size of MFO and ZMO phases in each nanocomposite sample were calculated using Rietveld refinement procedure.The x-ray diffraction(XRD)analysis and Fourier-transform infrared spectroscopy techniques established the variation in the lattice parameters of each phase are due to permutation of all cations among the octahedral and tetrahedral sites of MFO and ZMO.The different oxidation states of different ions in all samples were determined using x-ray photoelectron spectroscopy(XPS)technique.The variation in absorbance of the nanocomposite samples with composition parameter(x)is dependent on the wavelength region.The optical bandgap of the nanocomposite samples is decreased as the content of ZMO phase increased.The effect of alloying on the refractive index,extinction coefficient,dielectric constant,optical conductivity,and the nonlinear optical behaviors of all samples were studied in detail.The nanocomposite sample x=0.5 disclosed upgraded optical parameters with the highest refractive index,optical conductivity,and PL intensity,which nominate it to be functional in various application fields.
文摘The X56 steel samples was corroded in the medium of salt water solution at the conditions of CO2 partial pressure POM 0.5 to 2.0 MPa, temperature 80 °C and flow rate 1.4m/s. Corrosion weigh loss, composition and structure, morphology and phase of corrosion films of the samples were investigate by SEM, EDS, XRD and XPS. The results indicated that the corrosion degree was accelerated with increasing POM ? The intense localised corrosion occurred on the surface of samples. The corrosion films mainly comprised of FeCO3 and complex phase products (Fe, Ca....)COj. There exists serious pitting on the metal substrates under the corrosion film. The theoretic and experimental analyses indicate this is caused by existed micropores or micro holes in films, which have the function of mass transportation.
基金The work was supported by the Regional Capacity Building for Sustainable Natural Resource Management and Agricultural Improvement under Climate Change(CAPSNAC)Project of the Norwegian Program for Capacity Building in Higher Education and Research for Development(NORHED).
文摘Dry evergreen montane forests in Ethiopia are severely threatened.The status of species composition and structure of forest vegetation are important indicators to understand the trends of threats on local plant communities.In the present study,we examined the floristic composition and structure of the Kibate Forest,Wonchi Highland,Ethiopia along environmental gradients.Sixty-six(30 m×30 m)plots were established every 100 m interval along altitudinal gradients(2811‒3073 m a.s.l.)in five transect lines for vegetation and environmental data collection.In total,125 vascular plant species belonging to 104 genera and 52 families were identified.Eighteen species(14%)were endemic to Ethiopia and Eritrea.The two most dominant families,Asteraceae(29 species)and Lamiaceae(eight species)accounted for 30%of the total number of species.The highest number of species(54%)was herbs.Four major community types(viz.,Olinia rochetiana-Myrsine melanophloeos,Ilex mitis-Galiniera saxifraga,Erica arborea-Protea gaguedi,and Hagenia abyssinica-Juniperus procera)were identified.The highest species richness,evenness,diversity,and importance value index were in community types 2 and 4.About 82%of the species and all endemic taxa except five were recorded in these two community types.The most dominant woody species were O.rochetiana,E.arborea,Olea europaea subsp.cuspidata,Myrica salicifolia,I.mitis var.mitis,and H.abyssinica with different patterns of population structure.The results show that there was a weak correlation between species richness and altitude.Our findings confirm that environmental variables both with interactions(such as altitude)and without interactions(such as livestock grazing)significantly(p<0.05)affect species richness.Anthropogenic activities and overgrazing by livestock appear to be the main threat in community types 2 and 3.Urgent management practices and conservation measures such as prohibiting forest clearing and overgrazing and planting indigenous trees through community participation should be considered in community types that are rich in endemic species but are highly threatened.
文摘The cold and dry boreal forests of the Southwest Yukon are dominated by white spruce (Picea glauca), trembling aspen (Populus tremuloides) and balsam poplar (Populus balsamifera), and the variability in structure and composition of stands depends on the favourability of disturbance, climate and site conditions for stimulating regeneration. In this study, we investigated relationships between stand structure and ecological, climatic and disturbance factors in the southwest Yukon. We found that white spruce dominates mature forests across the landscape, but it is regenerating proportionately less than trembling aspen. Nevertheless, regeneration of all the three species was abundant following any type or severity of disturbance. Height and diameter of both species varied with several environmental variables, particularly site physiography. Mixed stands of aspen and white spruce were more productive than pure stands of aspen or spruce. However, overall productivity in mixed stand decreased when density of aspen was more than 1000 stems/ ha. These results suggested that mixed stands of deciduous and coniferous species where appropriate should be promoted maintaining aspen density below 1000 stems/ha as the productivity declined beyond this threshold. Similarly, we suggest carrying out selection harvesting of co-dominant trees and regular thinning of intermediate trees to promote the height and diameter growth of the remaining trees.
基金National Key Technologies Research and Development Program of China(No.2012BAD22B04)
文摘In order to identify a harvesting model which is beneficial for broadleaf-Korean pine mixed forest(BKF) sustainability, we investigated four types of harvested stands which have been logged with intensities of 0(T0, control), 15%(T1, low intensity), 35%(T2, moderate intensity), and 100%(T3, clear-cutting), and examined the impacts of logging intensity on composition and structure of these stands. Results showed that there were no significant differences between T0 and T1 for all structural characteristics, except for density of seeding and large trees. The mean diameter at breast height(DBH, 1.3 m above the ground), stem density and basal area of large trees in T2 were significantly lower than in T0, while the density of seedlings and saplings were significantly higher in T2 than in T0. Structural characteristics in T3 were entirely different from T0. Dominant tree species in primary BKF comprised 93%, 85%, 45% and 10% of the total basal area in T0, T1, T2 and T3, respectively. Three community similarity indices, the Jaccard′s similarity coefficient(CJ); the Morisita-Horn index(CMH); and the Bray-Curtis index(CN), were the highest for T0 and T1, followed by T0 and T2, and T0 and T3, in generally. These results suggest that effects of harvesting on forest composition and structure are related to logging intensities. Low intensity harvesting is conductive to preserving forest structure and composition, allowing it to recover in a short time period. The regime characterized by low logging intensity and short rotations appears to be a sustainable harvesting method for BKF on the Changbai Mountains.
文摘The most of high/ultrahigh-pressure(HP/UHP)terranes of the world are characterized by the occurrence of numerous pods,lenses or layered blocks of eclogite and amphibolites(e.g.O’Brien,1997;Elvevold and Gilotti,2000;Zhang et al.,2003;and references there in).Field and petrological features suggest that amphibolites should
基金funded by the National Natural Science Foundation of China(W.Zhang,Grant No.12220101002)Shaanxi Provincial Key Science and Technology Innovation Team(Y.Xu,Grant No.2023-CX-TD-14)+1 种基金the Young Talent Fund of Association for Science and Technology in Shaanxi,China(D.Jia,Grant No.20230240)the Chinese Studentship Council(D.Jia,Grant No.201908060224).
文摘The abalone shell,a composite material whose cross-section is composed of inorganic and organic layers,has high strength and toughness.Inspired by the abalone shell,several multi-layer composite plates with different layer sequences and thicknesses are studied as bullet-proof material in this paper.To investigate the ballistic performance of this multi-layer structure,the complete characterization model and related material parameters of large deformation,failure and fracture ofAl_(2)O_(3)ceramics andCarbon Fiber Reinforced Polymer(CFRP)are studied.Then,3D finite element models of the proposed composite plates with different layer sequences and thicknesses impacted by a 12.7 mm armor-piercing incendiary(API)are built using Abaqus to predict failure.The simulation results show that the CFRP/Al2O3 ceramic/Ultrahigh Molecular Weight Polyethylene(UHMWPE)/CFRP(1 mm/4 mm/4 mm/1 mm)composite is the optimized stack of layers.The simulation results under specified layer sequence and thickness have a reasonable correlation with the experimental results and reflect the failure and fracture of the multi-layer composite protective armor.
文摘Soft actuators have garnered substantial attention in current years in view of their potential appliances in diverse domains like robotics,biomedical devices,and biomimetic systems.These actuators mimic the natural movements of living organisms,aiming to attain enhanced flexibility,adaptability,and versatility.On the other hand,angle-independent structural color has been achieved through innovative design strategies and engineering approaches.By carefully controlling the size,shape,and arrangement of nanostructures,researchers have been able to create materials exhibiting consistent colors regardless of the viewing angle.One promising class of materials that holds great potential for bioinspired soft actuators is MXenes in view of their exceptional mechanical,electrical,and optical properties.The integration of MXenes for bioinspired soft actuators with angle-independent structural color offers exciting possibilities.Overcoming material compatibility issues,improving color reproducibility,scalability,durability,power supply efficiency,and cost-effectiveness will play vital roles in advancing these technologies.This perspective appraises the development of bioinspired MXene-centered soft actuators with angleindependent structural color in soft robotics.
基金Funded by the National Natural Science Foundation of China(No.51474170)the Foundation of Shaanxi Educational Committee(No.17JK0395)the Xi’an Science and Technology Committee Program(No.GXYD9.2)。
文摘Flower-like copper foam Co_(3)O_(4) catalysts(Co_(3)O_(4)/CF) were prepared by hydrothermal method.The crystalline structure and microscopic morphology of the prepared samples were characterized by using X-ray diffractometer(XRD) and scanning electron microscope(SEM),and the electrochemical properties were investigated by an electrochemical workstation.The experimental results show that the Co_(3)O_(4) catalysts are successfully prepared on the foamed copper support by hydrothermal method,and the material’s morphology is mainly flower cluster.When the current density is 10 mA·cm^(-2),the overpotential value of the Co_(3)O_(4)/CF catalyst is 141 mV,lower than that of blank support.The electrochemical impedance(EIS) spectrum shows that the R_(ct )value of the Co_(3)O_(4)/CF catalyst decreases,and the Coulomb curves of double-layer show that the electrochemically active area of the Co_(3)O_(4)/CF catalyst efficiently increases compared with that of the blank support.Therefore,the as-obtained Co_(3)O_(4)/CF catalyst exhibits a good hydrogen evolution rate,showing great applicability potential in the catalytic electrolysis of water for hydrogen production.