Thermal transport in composition graded silicene/germanene heterostructures

Through equilibrium and non-equilibrium molecular dynamics simulations,we have demonstrated the inhibitory effect of composition graded interface on thermal transport behavior in lateral heterostructures.Specifically,we investigated the influence of composition gradient length and heterogeneous particles at the silicene/germanene(SIL/GER)heterostructure interface on heat conduction.Our results indicate that composition graded interface at the interface diminishes the thermal conductivity of the heterostructure,with a further reduction observed as the length increases,while the effect of the heterogeneous particles can be considered negligible.To unveil the influence of composition graded interface on thermal transport,we conducted phonon analysis and identified the presence of phonon localization within the interface composition graded region.Through these analyses,we have determined that the decrease in thermal conductivity is correlated with phonon localization within the heterostructure,where a stronger degree of phonon localization signifies poorer thermal conductivity in the material.Our research findings not only contribute to understanding the impact of interface gradient-induced phonon localization on thermal transport but also offer insights into the modulation of thermal conductivity in heterostructures.

Dynamics evolution of γ' precipitates size and composition interface between γ/γ' phases in Ni-Al alloy at different aging temperatures

The precipitation dynamics of γ’(L1-NiAl)phase and composition interfacial width between γ(fcc Ni)and γ’ phase were investigated using the phase field simulation linking with CALPHAD method.The coarsening rate and particle size distribution(PSD) of γ’ phase,the temporal composition interfacial width of γ/γ’ in Ni-17 at% Al alloy aged at 923,973 and 1023 K were clarified.As the aging temperature increases,the morphology of γ’ phase changes from the interconnected rectangle shape to the separated cuboidal shape.The average particle radius(<r>) of γ’ phase at coarsening stage follows <r> ∞t^(n) with the exponents n=0.21,0.23 and 0.26,respectively.The peak values of simulated PSDs at 923 K are less than the value calculated by the Lifshitz-Slyozov-Wagner(LSW) model,and the width of simulated PSD increases at later stage of precipitation.The normalized radius(r/<r>)which corresponds to the peak value of PSD moves from1.1 to 1.0 as the aging temperature increases from 923 to1023 K,and they are smaller than that of LSW model.The composition interfacial width decreases as the aging progresses and increases as the aging temperature increases.

Hot compressive deformation of eutectic Al-17at%Cu alloy on the interface of the Cu-Al composite plate produced by horizontal continuous casting

On the interface of the Cu-Al composite plate from horizontal continuous casting,the eutectic microstructure layer thickness ac-counts for more than 90%of the total interface thickness,and the deformation in rolling forming plays an important role in the quality of the composite plate.The eutectic microstructure material on the interface of the Cu-Al composite plate was prepared by changing the cooling rate of ingot solidification and the deformation in hot compression was investigated.The results show that when the deformation temperature is over 300℃,the softening effect of dynamic recrystallization ofα-Al is greater than the hardening effect,and uniform plastic deformation of eutectic microstructure is caused.The constitutive equation of flow stress in the eutectic microstructure layer was established by Arrhenius hy-perbolic-sine mathematics model,providing a reliable theoretical basis for the deformation of the Cu-Al composite plate.

Improving the Combined State of Rubber-Clay CompositeInterface by Applying Coupling Agent

The surface modification of clay fines was carried out by using silanecoupling agent. By means of IR spectra etc, a study was made on the combined state ofcoupling agent and clay. A rubber--clay composite material with excellent performancehas been prepared.

Analysis of mode Ⅲ crack perpendicular to the interface between two dissimilar strips

The present work is concerned with the problem of mode Ⅲ crack perpendicular to the interface of a bi-strip composite. One of these strips is made of a functionally graded material and the other of an isotropic material, which contains an edge crack perpendicular to and terminating at the interface. Fourier transforms and asymptotic analysis are employed to reduce the problem to a singular integral equation which is numerically solved using Gauss-Chebyshev quadrature formulae. Furthermore, a parametric study is carried out to investigate the effects of elastic and geometric characteristics of the composite on the values of stress intensity factor.

Atom Diffusion Behavior and Bonding Strength of Ag/Cu Composite Interface

The atom (Ag,Cu) diffusion behavior and the effect of technology on the interface of rolled Ag/Cu composite contact were investigated. The concentration of Ag and Cu atoms near the interface was determined with electron probe. The bonding strength of composite interface was tested and the fracture in tensile sample was observed by SEM. The results show that there was inter diffusion of Ag and Cu atoms on the interface, which formed compact layer with high bonding strength of 98 MPa. The practical application proved that the Ag/Cu composite interface is reliable.

Structure and Stability of TiC/γ Interface inFe-Cr-Ni Base Composite

The morphology. orientation relationship and stability of TiC/γ interface in Fe-Cr-Ni base composite synthesized with a liquid state in-situ process have been studied. The TiC/γ interface in as-cast sample is of coherent feature. Its orientation relationship is (020)γ／／(220)TiC, [001]γ||[001]TiC. During the aging at 1473 K, the TiC/γ interface may dissolve in matrix and lamellar M23C6 compound may precipitate from γ-matrix.

Analytical study of the interface in fibre-reinforced 2D composite material

Imperfect bonding between the constitutive components can greatly affect the properties of the composite structures.An asymptotic analysis of different types of imperfect interfaces arising in the problem of 2D fibrereinforced composite materials are proposed.The performed study is based on the asymptotic reduction of the governing biharmonic problem into two harmonic problems.All solutions are obtained in a closed analytical form.The obtained results can be used for the calculation of pull-out and pushout tests,as well as for the investigation of the fracture of composite materials.

Fiber optic sensing and performance evaluation of a water conveyance tunnel with composite linings under super-high internal pressures

For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the deformation and failure characteristics of lining structures under internal water pressure are not well investigated in the literature,particularly for three-layer composite linings.This study presents an in situ experimental investigation on the response of two types of composite linings(i.e.separated and combined lining structures)subjected to internal pressures,in which a fiber optic nerve system(FONS)equipped with distributed strain and displacement sensing nerves was employed to monitor the performance of the two composite linings during testing.The experimental results clearly show that the damage of the tunnel lining under different internal pressures was mainly located in the self-compaction concrete layer.The separated lining structure responded more aggressively to the variations in internal pressures than the combined one.Moreover,two evaluation indices,i.e.radial displacement and effective stiffness coefficient,are proposed for describing the changes in the structural bearing performance.The effective stiffness coefficients of the two types of lining structures were reduced by 39.4%and 29.5%,respectively.Considering the convenience of field monitoring,it is suggested that the average strains at different layers can be used as characteristic parameters for estimating the health conditions of lining structures in service.The analysis results provide a practical reference for the design and health evaluation of water conveyance shield tunnels with composite linings.

Direct-chill semi-continuous casting process of three-layer composite ingot of 4045/3004/4045 aluminum alloys

Three-layer composite ingot of 4045/3004/4045 aluminum alloys was prepared by direct-chill semi-continuous casting process,the temperature field distribution near the composite interface,macro-morphology,microstructure and composition distribution of the composite interface were investigated.The results show that semi-solid layer with a certain thickness forms near the interface due to the effect of cooling plate,which ensures successful implementation of casting the composite ingot.Two different aluminum alloys are well bonded metallurgically.The mechanical properties of composite interface were measured,the tensile and shearing strengths of composite interface are 105 and 88 MPa,respectively,which proves that the composite interface is a kind of metallurgical bonding.

Solid-state bonding between Al and Cu by vacuum hot pressing

Diffusion bonding between aluminum and copper was performed by vacuum hot pressing at temperatures between 623 and 923 K through two thermal processes： hot compression under the deformation rate of 0.2 mrrdmin for 10 rain at pre-set temperatures, and additional pressing at 0.2 mm/min for 20 rain during furnace cooling. After analyzing interface, the feasible diffusion bonding temperature was suggested as 823 K. The three major intermetallic layers generated during diffusion bonding process were identified as AIECu, AlCu＋AlaCu4 and Al4Cu9. Furthermore, local hardness values ofAlECU, AlCu＋AlaCu4 and Al4Cu9 layers average at （4.97±0.05）, （6.33±0.00） and （6.06±0.18） GPa, respectively.

Experimental research on electromagnetic continuous casting high-speed steel composite roll

A high speed steel composite roll billet was fabricated, which is regular in shape, smooth in surface, slight in trace, compact in internal structure, free of slag inclusion, shrinkage cavity, cracks and other flaws, and good in macro quality of junction surface using a vertical continuous casting machine. The interface zone microstructure of bimetallic in billet of high speed steel composite roll was analyzed by metallurgical microscope(OM), X-ray diffractmeter(XRD), scanning electron microscopy(SEM) and energy-dispersive X-ray analysis(EDS). The results indicate that the microstructure of roll billet is composed of chilled solidified layer, dendrite zone, interfacial zone of bimetal and core material zone. The microstructure of outer shell material is composed of martensite + bainite + residual austenite + some small labyrinth-shape, small-short lath-shape, or dollop-shape eutectic carbides. The microstructure of core material is slice-shape pearlite and a little ferrite along boundary of cells. The interface region microstructure of bimetallic composite roll consists of diffusion region, chilled solidified layer and columnar grain region.

Interfacial Microstructure and Mechanical Properties of Al Alloy/Mg Alloy Laminated Composite Plates Fabricated by Equal Channel Angular Processing

KAl（7075）alloy/Mg（AZ31）alloy laminated composite plates were successfully fabricated by the equalchannelangular processing（ECAP）by using route A for 1,2,and 3 passes at 573 K,respectively.After fabrication,the 1-pass ECAPed laminated composite plates were annealed at different temperatures.The microstructure evolution,phase constituent,and bonding strength near the joining interface of Al（7075）alloy/Mg（AZ31）alloy laminated composites plates were evaluated with scanning electron microscopy,X-ray diffraction,and shear tests.The experimentalresults indicated that a 20 μm diffusion layer was observed at the joining interface of Al（7075）alloy/Mg（AZ31）alloy laminated composites plates fabricated by the 1-pass ECAP,which mainly included Al_3Mg_2 and Mg_（17）Al_（12） phases.With the increase of passes,the increase of diffusion layer thickness was not obvious and the form of crack in these processes led to the decrease of bonding strength.For 1-pass ECAPed composites,the thickness of diffusion layer remained unchanged after annealed at 473 K,while the bonding strength reached its maximum value 29.12 MPa.However,after elevating heat treatment temperature to 573 K,the thickness of diffusion layer increased rapidly,and thus the bonding strength decreased.

STUDY OF K_2O·6TiO_2 WHISKER REINFORCED AI COMPOSITES FOR THEIR MECHANICAL PROPERTIES AND INTERFACIAL STRUCTURES

A newly developed whisker K_(2)O 6TiO_(2) reinforced 6061 Al composite was prepared by squeeze casting process. The flexural strength of the composite is 518MPa, and decreases to 490 M Pa after T6 treatment.The hardness of the composite also shows the similar change while T6 treating. The results of HRTEMobservation may explaine this property change. It was considered that there is a continuous TiO layer at the whisker-matrix interface, which is easily to react with the segregated Mg and to form MgTi_(2)O_(4), MgAl_(2)O_(4). The thickening of TiO layer after T6 treatment is the main reason resulting in strength degradation of composite.

STABILITY OF WHISKERS AND INTERFACIAL MICROSTRUCTURE IN ALUMINUM MATRIX COMPOSITES REINFORCED BY K_2O·8TiO_2 WHISKERS

The stability of K_2O·8TiO_2 whiskers and the microstructures of the interfaces in K_2O·8TiO_2 whisker reinforced ZL109 aluminum composites under different heat treatment conditions were investigated by means of transmission electron microscopy(TEM) , mostly by high resolution TEM( HRTEM). It was found that K_2O·8TiO_2 whiskers were not very stable.The edge of the whiskers decomposed and a TiO interfacial layer formed during the process of fabricating K_2O·8TiO_2/ ZL109Al composite,and so the interior with increasing temperature and time of heatreatment. Two kinds of interfacial microstructures between the whiskers and the matrix were characterized; one was the TiO layer and the other was a nano scale amorphous transition layer. A few MgAl_2O_4 particles were also observed at the whisker/ matrix interfaces.

Interfacial effects in electromagnetic coupling within piezoelectric phononic crystals

In this paper, we discuss waves in piezoelectric periodic composite, with the emphasis on the connection between the electromechanical coupling and the effects of dispersion of Bloch-Floquet waves. A particular attention is given to structures containing interfaces between dissimilar media and localization of the electrical fields near such interfaces.

Diffusion mechanism of immiscible Fe-Mg system induced by high-density defects at the steel/Mg composite interface

Due to positive mixing heat between Fe and Mg,it is difficult to diffuse for Fe-Mg at the interface of steel/Mg laminated composites,resulting in the inability to achieve high-strength metallurgical bonding.In this paper,20#steel/Mg laminated composites were prepared by large deformation rolling and subse-quent diffusion heat treatment process.The interfacial bonding strength was improved by constructing high-density crystal defects at the interface to promote element diffusion.The mechanisms of interface morphology evolution and element diffusion were analyzed by finite element simulation and theoretical calculation.The results show after diffusion heat treatment,the bond strength of the large deformation rolled interface was increased from 14 to 30 MPa.Fe-Mg transition layer with about 80 nm thickness as well as high-density vacancies,dislocations and grain boundaries were formed in the large deforma-tion rolled interface region.During diffusion heat treatment,Mg elements diffused into grain interior and grain boundary regions of 20#steel under the effect of heat-force coupling,and the thickness of Fe-Mg transition layer increased to 150 nm,forming an Fe-based supersaturated solid solution.The in-terface with high-density defects constituted a non-equilibrium interface.The 20#steel internal energy in the non-equilibrium interface is able to overcome positive mixing heat of immiscible Fe-Mg system and provide the driving force for Mg elements diffusion.Promoting elemental diffusion by constructing high-density defects can be a new concept to achieve metallurgical bonding at the interface of immiscible metal laminated composites.

Preparation and Characterization of Cyano-Silicon-Containing Arylacetylene Resins and Their Composites:Dual Enhancement Strategy Involving Physical Interfacial Interactions and Chemical Crosslinking

Silicon-containing arylacetylene (PSA) resins have broad application prospects because of their excellent heat resistance.However,improving their mechanical properties and interfacial bonding with reinforcement fibers while maintaining heat resistance is a challenge in engineering applications.Here,poly(diethynylbenzene-methylsilyl-3-benzonitrile)(DEB-CN) and poly(diethynylbenzene-methylsilyl-3,6-diethynylcarbazole-3-benzonitrile)(DEC-CN) were synthesized via an isopropylmagnesium chloride lithium-chloride complex (i-PrMgCl·LiCl),overcoming the compatibility problem between cyano groups and Grignard reagents.The cyano and alkyne groups in the resin underwent cyclization to form pyridine,catalyzed by the-NH-moiety in DEC-CN,resulting in extremely high thermal stability (5%weight loss temperature:669.3°C,glass transition temperature>650°C).The combination of cyano dipole-dipole pairing and hydrogen bonding greatly enhanced the resin-fiber interface properties,while the generated pyridine promoted stress relief in the crosslinked network,substantially improving the mechanical properties of the cyano-silicon-containing arylacetylene resin composites.The flexural strength of quartz fiber cloth/DEC-CN composites was 298.2 MPa at room temperature and 145.9 MPa at 500°C,corresponding to 84.0%and 127.6%enhancements,respectively,over the cyano-free counterpart.These cyano-silicon-containing arylacetylene resins exhibited a dual reinforcement mechanism involving physical interfacial interactions and chemical crosslinking,achieving a good balance between thermal stability and mechanical properties.

Interface science in polymer-based composite solid electrolytes in lithium metal batteries

Solid-state lithium metal batteries(SSLMBs)have attracted considerable attention as one of the most promising energy storage systems owing to their high safety and energy density.Solid electrolytes,particularly polymer-based composite solid electrolytes(CSEs),are considered promising electrolyte candidates for SSLMBs.However,theirwide application is inhibited by various electrochemical issues,such as low ionic conductivity,the growth of lithium dendrites,and poor cycling stability,which are related to interface issues within SSLMBs.In this review,the parameters related to various interfaces in the CSE of SSLMBs,including the interfaces between the polymer matrix and inorganic fillers,between the CSEs and the cathode,and between the CSEs and the lithium metal anode,are examined.Relevant issues and corresponding remediation strategies are proposed.Finally,future perspectives based on interfacial engineering and the characterization of polymer/inorganic filler interactions are proposed for building high-performance CSEs for use in SSLMBs.