Experimental and numerical simulation of loading rate effects on failure and strain energy characteristics of coal-rock composite samples

The deformation and failure of coal and rock is energy-driving results according to thermodynamics.It is important to study the strain energy characteristics of coal-rock composite samples to better understand the deformation and failure mechanism of of coal-rock composite structures.In this research,laboratory tests and numerical simulation of uniaxial compressions of coal-rock composite samples were carried out with five different loading rates.The test results show that strength,deformation,acoustic emission(AE)and energy evolution of coal-rock composite sample all have obvious loading rate effects.The uniaxial compressive strength and elastic modulus increase with the increase of loading rate.And with the increase of loading rate,the AE energy at the peak strength of coal-rock composites increases first,then decreases,and then increases.With the increase of loading rate,the AE cumulative count first decreases and then increases.And the total absorption energy and dissipation energy of coal-rock composite samples show non-linear increasing trends,while release elastic strain energy increases first and then decreases.The laboratory experiments conducted on coal-rock composite samples were simulated numerically using the particle flow code(PFC).With careful selection of suitable material constitutive models for coal and rock,and accurate estimation and calibration of mechanical parameters of coal-rock composite sample,it was possible to obtain a good agreement between the laboratory experimental and numerical results.This research can provide references for understanding failure of underground coalrock composite structure by using energy related measuring methods.

Upgraded Analytical Protocols in Bauxite Refining Industry Using Composite Sampling Approach to Minimize Laboratory Analysis Load

The laboratories in the bauxite processing industry are always under a heavy workload of sample collection, analysis, and compilation of the results. After size reduction from grinding mills, the samples of bauxite are collected after intervals of 3 to 4 hours. Large bauxite processing industries producing 1 million tons of pure aluminium can have three grinding mills. Thus, the total number of samples to be tested in one day reaches a figure of 18 to 24. The sample of bauxite ore coming from the grinding mill is tested for its particle size and composition. For testing the composition, the bauxite ore sample is first prepared by fusing it with X-ray flux. Then the sample is sent for X-ray fluorescence analysis. Afterwards, the crucibles are washed in ultrasonic baths to be used for the next testing. The whole procedure takes about 2 - 3 hours. With a large number of samples reaching the laboratory, the chances of error in composition analysis increase. In this study, we have used a composite sampling methodology to reduce the number of samples reaching the laboratory without compromising their validity. The results of the average composition of fifteen samples were measured against composite samples. The mean of difference was calculated. The standard deviation and paired t-test values were evaluated against predetermined critical values obtained using a two-tailed test. It was found from the results that paired test-t values were much lower than the critical values thus validating the composition attained through composite sampling. The composite sampling approach not only reduced the number of samples but also the chemicals used in the laboratory. The objective of improved analytical protocol to reduce the number of samples reaching the laboratory was successfully achieved without compromising the quality of analytical results.

Application of Log Kriging on Estimated Reserves of the 10-9 Ore Body of Lutangba in the Gejiu Tin Deposits

The approaches adopted so far in China to calculate reserves of ore deposits have largely been dependent on polygonal methods, including a cross-section method and a geological block method. However, for various reasons, especially, the complexity of the geology, and the ore bodies, the deposits became gradually known as development and exploitation took place. There is a certain difference between the prospecting and mining, which will have a great impact on both geological and cutoff grade at the stage of geological mine construction and production. As much accurate information as possible on the spatial distribution patterns of ore bodies and global reserves is essential to improve the production efficiency and reduce production cost. The 10-9 ore body of Lutangba in the Gejiu Tin Deposits was selected as our research object, using a log Kriging and an inverse distance weighing method. In our paper the results are compared with the reserves calculated by the polygonal block method. The global estimate and estimation errors associated with each estimation method are discussed.

Assessment of wind products obtained from multiple microwave scatterometers over the China Seas

Sea surface winds （SSWs） are vital to many meteorological and oceanographic applications, especially for regional study of short-range forecasting and Numerical Weather Prediction （NWP） assimilation. Spaceborne seatterometers can provide global ocean surface vector wind products at high spatial resolution. However, given the limited spatial coverage and revisit time for an individual sensor, it is valuable to study improvements of multiple microwave scatterometer observations, including the advanced scatterometer onboard parallel satellites MetOp-A （ASCAT-A） and MetOp-B （ASCAT-B） and microwave scatterometers aboard Oceansat-2 （OSCAT） and HY-2A （HY2-SCAT）. These four scatterometer-derived wind products over the China Seas （0°-40°N, 105°-135°E） were evaluated in terms of spatial coverage, revisit time, bias of wind speed and direction, after comparison with ERA-Interim forecast winds from the European Centre for Medium-Range Weather Forecasts （ECMWF） and spectral analysis of wind components along the satellite track. The results show that spatial coverage of wind data observed by combination of the four sensors over the China Seas is about 92.8% for a 12-h interval at 12：00 and 90.7% at 24：00, respectively. The analysis of revisit time shows that two periods, from 5：30-8：30 UTC and 17：00-21：00 UTC each day, had no observations in the study area. Wind data observed by the four sensors along satellite orbits in one month were compared with ERA-Interim data, indicating that bias of both wind speed and direction varies with wind speed, especially for speeds less than 7 m/s. The bias depends on characteristics of each satellite sensor and its retrieval algorithm for wind vector data. All these results will be important as guidance in choosing the most suitable wind product for applications and for constructing blended SSW products.

STACKING SEQUENCE OPTIMIZA-TION OF LAMINATED COMPOSITE CYLINDER SHELL FOR MAXIMAL BUCKLING LOAD

A new optimization method for the optimization of stacking of composite glass fiber laminates is developed. The fiber orientation and angle of the layers of the cylindrical shells are sought considering the buckling load. The proposed optimization algorithm applies both finite element analysis and the mode-pursuing sampling （MPS）method. The algorithms suggest the optimal stacking sequence for achieving the maximal buckling load. The procedure is implemented by integrating ANSYS and MATLAB. The stacking sequence designing for the symmetric angle-ply three-layered and five-layered composite cylinder shells is presented to illustrate the optimization process, respectively. Compared with the genetic algorithms, the proposed optimization method is much faster and efficient for composite staking sequence plan.

The Theory of Composite and Switching Characteristics under Sampling Scheme-Ⅱ

3.Composite and Switching Characteristics under ISO 2859 Sampling Scheme IS(1)Graphs of sampling program of IS.