Design and fabrication of compound varifocal lens driven by polydimethylsiloxane film elastic deformation

A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave lens form a coaxial compound lens system. The plane-concave lens equipped with driving coils is installed directly above the PDMS lens surrounded by the annular magnet. When different currents are applied, the annular magnet moves up and down, driving the PDMS film to undergo elastic deformation, and then resulting in longitudinal movement of the PDMS lens. The position change of the PDMS lens changes the focal length of the compound lens system. To verify the feasibility and practicability of this design, a prototype of our compound lens system is fabricated in experiment. Our proposed compound lens shows that its zoom ability reaches 9.28 mm when the current ranges from -0.20 A to 0.21 A.

The Flipping-Free Full-Parallax Tabletop Integral Imaging with Enhanced Viewing Angle Based on Space-Multiplexed Voxel Screen and Compound Lens Array

Tabletop integral imaging display with a more realistic and immersive experience has always been a hot spot in three-dimensional imaging technology,widely used in biomedical imaging and visualization to enhance medical diagnosis.However,the traditional structural characteristics of integral imaging display inevitably introduce the flipping effect outside the effective viewing angle.Here,a full-parallax tabletop integral imaging display without the flipping effect based on space-multiplexed voxel screen and compound lens array is demonstrated,and two holographic functional screens with different parameters are optically designed and fabricated.To eliminate the flipping effect in the reconstruction process,the space-multiplexed voxel screen consisting of a projector array and the holographic functional screen is presented to constrain light beams passing through the corresponding lens.To greatly promote imaging quality within the viewing area,the aspherical structure of the compound lens is optimized to balance the aberrations.It cooperates with the holographic functional screen to modulate the light field spatial distribution.Compared with the simulation results,the distortion rate of the imaging display is reduced to less than 9%from more than 30%.In the experiment,the floating high-quality reconstructed three-dimensional image without the flipping effect can be observed with the correct 3D perception at 96°×96°viewing angle,where 44,100 viewpoints are employed.

Optical Microsphere Nano-Imaging:Progress and Challenges

The optical diffraction effect imposes a radical obstacle preventing conventional optical microscopes from achieving an imaging resolution beyond the Abbe diffraction limit and thereby restricting their usage in a multitude of nanoscale applications.Over the past decade,the optical microsphere nanoimaging technique has been demonstrated to be a cost-effective solution for overcoming the diffraction limit and has achieved an imaging resolution of up to about k6k8 in a real-time and label-free manner,making it highly competitive among numerous super-resolution imaging technologies.In this review,we summarize the underlying nano-imaging mechanisms of the microsphere nanoscope and key advancements aimed at imaging performance enhancement:first,to change the working environment or modify the peripheral hardware of a single microsphere nanoscope at the system level;second,to compose the microsphere compound lens;and third,to engineer the geometry or ingredients of microspheres.We also analyze challenges yet to be overcome in optical microsphere nano-imaging,followed by an outlook of this technique.

Focusing high-energy x-rays by a P MMA compound x-ray lens on Beijing synchrotron radiation facility

The x-ray compound lens is a novel refractive x-ray optical device. This paper reports the authors＇ recent research on a polymethyl methacrylate （PMMA） compound x-ray lens. Firstly the designing and LIGA fabrication process for the PMMA compound x-ray lens are briefly described. Then, a method for theoretical analysis, as well as the experimental system for measurement is also introduced. Finally, the focusing spots for 8keV monochromatic x-rays by the PMMA compound x-ray lens are measured and analysed. According to the experimental results, it is concluded that the PMMA compound x-ray lens promises a good focusing performance under the high-energy x-rays.

Integral imaging-based tabletop light field 3D display with large viewing angle

Light field 3D display technology is considered a revolutionary technology to address the critical visual fatigue issues in the existing 3D displays.Tabletop light field 3D display provides a brand-new display form that satisfies multi-user shared viewing and collaborative works,and it is poised to become a potential alternative to the traditional wall and portable display forms.However,a large radial viewing angle and correct radial perspective and parallax are still out of reach for most current tabletop light field 3D displays due to the limited amount of spatial information.To address the viewing angle and perspective issues,a novel integral imaging-based tabletop light field 3D display with a simple flat-panel structure is proposed and developed by applying a compound lens array,two spliced 8K liquid crystal display panels,and a light shaping diffuser screen.The compound lens array is designed to be composed of multiple three-piece compound lens units by employing a reverse design scheme,which greatly extends the radial viewing angle in the case of a limited amount of spatial information and balances other important 3D display parameters.The proposed display has a radial viewing angle of 68.7°in a large display size of 43.5 inches,which is larger than the conventional tabletop light field 3D displays.The radial perspective and parallax are correct,and high-resolution 3D images can be reproduced in large radial viewing positions.We envision that this proposed display opens up possibility for redefining the display forms of consumer electronics.

A method based on diffraction theory for predicting 3D focusing performance of compound refractive X-ray lenses

A method based on the diffraction theory for estimating the three-dimensional (3D) focusing performance of the compound refractive X-ray lenses is presented in this paper. As a special application, the 3D X-ray intensity distribution near the focus is derived for a plano-concave compound refractive X-ray lens. Moreover, the computer codes are developed and some results of 3D focusing performance for a compound refractive X-ray lens with Si material are shown and discussed.

A theoretical method based on Fourier spectrum analysis for the focusing performances of the X-ray compound refractive lenses

It is important to predict the intensity distribution in focusing plane for designing the X-ray compound refractive lenses. On the basis of analyzing the structure of X-ray compound lenses and comparing it with Praunhofer diffraction system, it is concluded that the X-ray focusing system can be regarded as a kind of Praunhofer diffraction system. Therefore, a method based on Fourier spectrum analysis is presented to predict the intensity distribution in the focusing plane for the X-ray lenses. A brief analysis on the relationship between the parameters of X-ray lenses and their focusing performance is also given in this paper.

Optimizing depth of field in 3D light-field display by analyzing and controlling light-beam divergence angle

A concept of divergence angle of light beams(DALB)is proposed to analyze the depth of field(DOF)of a 3D light-field display system.The mathematical model between DOF and DALB is established,and the conclusion that DOF and DALB are inversely proportional is drawn.To reduce DALB and generate clear depth perception,a triple composite aspheric lens structure with a viewing angle of 100°is designed and experimentally demonstrated.The DALB-constrained 3D light-field display system significantly improves the clarity of 3D images and also performs well in imaging at a 3D scene with a DOF over 30 cm.

Design and fabrication of one-dimensional focusing X-ray compound lens with A1 material

A method based on Fourier spectrum analysis for predicting the performances of the X-ray compound lenses is briefly introduced, the theoretical result obtained is the same as that of Fresnel-Kirchhoff approach. A kind of technique named moulding is developed for fabricating the one-dimensional (1D) compound X-ray lens with Al material and the fabrication process is presented. In addition, a two-time coating method is used to improve the numerical apertures of the compound lenses. Furthermore, the focusing performance of the Al compound X-ray lens under the high energy X-rays is measured.