Comprehensive analysis of gene mutations and mismatch repair in Chinese colorectal cancer patients

BACKGROUND RAS,BRAF,and mismatch repair(MMR)/microsatellite instability(MSI)are crucial biomarkers recommended by clinical practice guidelines for colorectal cancer(CRC).However,their characteristics and influencing factors in Chinese patients have not been thoroughly described.AIM To analyze the clinicopathological features of KRAS,NRAS,BRAF,and PIK3CA mutations and the DNA MMR status in CRC.METHODS We enrolled 2271 Chinese CRC patients at the China-Japan Friendship Hospital.MMR proteins were tested using immunohistochemical analysis,and the KRAS/NRAS/BRAF/PIK3CA mutations were determined using quantitative polymerase chain reaction.Microsatellite status was determined using an MSI detection kit.Statistical analyses were conducted using SPSS software and logistic regression.RESULTS The KRAS,NRAS,BRAF,and PIK3CA mutations were detected in 44.6%,3.4%,3.7%,and 3.9% of CRC patients,respectively.KRAS mutations were more likely to occur in patients with moderate-to-high differentiation.BRAF mutations were more likely to occur in patients with right-sided CRC,poorly differentiated,or no perineural invasion.Deficient MMR(dMMR)was detected in 7.9% of all patients and 16.8% of those with mucinous adenocarcinomas.KRAS,NRAS,BRAF,and PIK3CA mutations were detected in 29.6%,1.1%,8.1%,and 22.3% of patients with dMMR,respectively.The dMMR was more likely to occur in patients with a family history of CRC,aged<50 years,right-sided CRC,poorly differentiated histology,no perineural invasion,and with carcinoma in situ,stage I,or stage II tumors.CONCLUSION This study analyzed the molecular profiles of KRAS,NRAS,BRAF,PIK3CA,and MMR/MSI in CRC,identifying key influencing factors,with implications for clinical management of CRC.

Comprehensive Analysis Method of Slope Stability Based on the Limit Equilibrium and Finite Element Methods and Its Application

To study the safety and stability of large slopes, taking the right side slope of the Yuxi’an tunnel of the Yuchu Expressway Bridge in Yunnan Province as an example, limit equilibrium and finite element analysis were applied to engineering examples to calculate the stability coefficient of the slope before and after excavation in the natural state. After comparative analysis, it was concluded that the former had a clear mechanical model and concept, which could quickly provide stability results;the latter could accurately determine the sliding surface of the slope and simulate the stress state changes of the rock and soil mass. The stability coefficients calculated by the two methods were within the stable range, but their values were different. On this basis, combined with the calculation principles, advantages and disadvantages of the two methods, a comprehensive analysis method of slope stability based on the limit equilibrium and finite element methods was proposed, and the rationality of the stability coefficient calculated by this method was judged for a slope case.

Reliability Analysis of Unmanned Aerial Vehicles Flight Control System Based on Reliability Analysis Technologies

The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact of their systems,long distance of remote control and skill of manipulator technology.According to the application of engineering application,failure mode effects and criticality analysis( FMECA),failure reporting analysis and corrective action comprehensive analysis systems( FRACAS)and fault tree analysis( FTA)( 3 F) were combined.And also a set of user-friendly,more time,more efficient and accurate reliability analysis system were explored.

Utilizing comprehensive decision analysis methods to determine an optimal planting pattern and nitrogen application for winter oilseed rape

Oilseed rape is one of the most important oil crops globally.Attaining the appropriate cultivation method(planting pattern and nitrogen level)is necessary to achieve high yield,quality and resource utilization efficiency.However,the optimal method for oilseed rape varies across countries and regions.The objective of the present study was to determine an appropriate cultivation method,including planting pattern and nitrogen application,for winter oilseed rape in northwestern China.Two planting patterns:ridge film mulching and furrow planting(RFMF)and flat planting(FP),and six nitrogen(N)amounts:0(N0),60(N60),120(N120),180(N180),240(N240),and 300(N300)kg N ha–1 were applied across three growing seasons(2014–2017).Three comprehensive decision analysis methods:principal component analysis,grey correlation degree analysis and the combined entropy weight and dynamic technique for order preference by similarity to ideal solution method were used to evaluate the growth and physiological indicators,nutrient uptake,yield,quality,evapotranspiration,and water use efficiency of winter oilseed rape.Planting pattern,nitrogen amount and their interaction significantly affected the indicators aforementioned.The RFMF pattern significantly increased all indicators over the FP pattern.Application of N also markedly increased all the indicators except for seed oil content,but the yield,oil production and water use efficiency were decreased when N fertilizer exceeded 180 kg N ha–1 under FP and 240 kg N ha–1 under RFFM.The evaluation results of the three comprehensive decision analysis methods indicated that RFMF planting pattern with 240 kg N ha–1 is an appropriate cultivation method for winter oilseed rape in northwestern China.These findings are of vital significance to maximize yield,optimize quality and improve resource use efficiencies of winter oilseed rape.

Comprehensive Evaluation Model of Reservoir Operation Based on Improved Set Pair Analysis

A comprehensive evaluation model based on improved set pair analysis is established. Considering the complexity in decision-making process, the model combines the certainties and uncertainties in the schemes, i.e., identical degree, different degree and opposite degree. The relations among different schemes are studied, and the traditional way of solving uncertainty problem is improved. By using the gray correlation to determine the difference degree, the problem of less evaluation indexes and inapparent linear relationship is solved. The difference between the evaluation parameters is smaller in both the fuzzy comprehensive evaluation model and fuzzy matter-element method, and the dipartite degree of the evaluation result is unobvious. However, the difference between each integrated connection degree is distinct in the improved set pair analysis. Results show that the proposed method is feasible and it obtains better effects than the fuzzy comprehensive evaluation method and fuzzy matter-element method.

Comprehensive Reliability Allocation Method for CNC Lathes Based on Cubic Transformed Functions of Failure Mode and Effects Analysis

Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.

Second-Order Adjoint Sensitivity Analysis Methodology for Computing Exactly Response Sensitivities to Uncertain Parameters and Boundaries of Linear Systems: Mathematical Framework

This work presents the “Second-Order Comprehensive Adjoint Sensitivity Analysis Methodology (2nd-CASAM)” for the efficient and exact computation of 1st- and 2nd-order response sensitivities to uncertain parameters and domain boundaries of linear systems. The model’s response (i.e., model result of interest) is a generic nonlinear function of the model’s forward and adjoint state functions, and also depends on the imprecisely known boundaries and model parameters. In the practically important particular case when the response is a scalar-valued functional of the forward and adjoint state functions characterizing a model comprising N parameters, the 2nd-CASAM requires a single large-scale computation using the First-Level Adjoint Sensitivity System (1st-LASS) for obtaining all of the first-order response sensitivities, and at most N large-scale computations using the Second-Level Adjoint Sensitivity System (2nd-LASS) for obtaining exactly all of the second-order response sensitivities. In contradistinction, forward other methods would require (N2/2 + 3 N/2) large-scale computations for obtaining all of the first- and second-order sensitivities. This work also shows that constructing and solving the 2nd-LASS requires very little additional effort beyond the construction of the 1st-LASS needed for computing the first-order sensitivities. Solving the equations underlying the 1st-LASS and 2nd-LASS requires the same computational solvers as needed for solving (i.e., “inverting”) either the forward or the adjoint linear operators underlying the initial model. Therefore, the same computer software and “solvers” used for solving the original system of equations can also be used for solving the 1st-LASS and the 2nd-LASS. Since neither the 1st-LASS nor the 2nd-LASS involves any differentials of the operators underlying the original system, the 1st-LASS is designated as a “first-level” (as opposed to a “first-order”) adjoint sensitivity system, while the 2nd-LASS is designated as a “second-level” (rather than a “second-order”) adjoint sensitivity system. Mixed second-order response sensitivities involving boundary parameters may arise from all source terms of the 2nd-LASS that involve the imprecisely known boundary parameters. Notably, the 2nd-LASS encompasses an automatic, inherent, and independent “solution verification” mechanism of the correctness and accuracy of the 2nd-level adjoint functions needed for the efficient and exact computation of the second-order sensitivities.

Non-isothermal Kinetic Analysis on the Thermal Decomposition of the Phase 517 from Hydration Product of Magnesium Sulfide Cement

In order to better understand the thermodynamic properties of magnesium oxysulfate(MOS)cement,pure reagent was analyzed to prepare magnesium sulfide cement,non-isothermal kinetics calculation of the main hydration products was also carried out,and the conversion process of magnesium sulfide cement 517 phase at different temperatures was investigated.Composition of magnesium sulfide cement prepared was measured by XRD technique,and decomposed by a comprehensive thermal analyzer,and DSC curves of magnesium sulfide cement under different temperature rising rates were processed by Kinssinger method and Dolye-Ozawa method.According to the TG-DSC curves of magnesium sulfide cement,the thermal decomposition reaction process can be divided into five stages under normal conditions.The DSC curve was processed by Kinssinger method and Dolye-Ozawa method,and the kinetic analysis was carried out to calculate the 517 phase activation energy of magnesium sulfide cement.The three stages correspond to different activation energies.Therefore,flame retardant mechanism and thermal decomposition mechanism of magnesium sulfide cement based materials are deduced.

PRIMARY PLASMA CELL LEUKEMIA(A COMPREHENSIVE ANALYSIS OF 44 CASES)

Four cases of primary plasma cell leukemia (PPCL) admitted to Zhongshan Hospital from 1959 to 1987 are reported with a review on additional 40 cases reported in China. Comparing with the 57 cases of multiple myeloma (MM) treated in our hospital, the following features were observed in PPCL: (1) The age was younger, with a mean of 45.2 years, 34.1% of the patients were under 40 years. (2) Onset was abrupt. Duration from onset to diagnosis was 2 months or less in 77% patients but never beyond 6 months. (3) 81.8% patients had liver enlargement, 59.1% splenomegaly and 61.4% sternum tenderness. (4) All patients showed marked anemia with an average hemoglobin of 65 g/L. BPC count was less than 100 × 109/L in 76% patients and WBC was more than 10×109/L in 77%. (5) Plasma cell number in the marrow was markedly increased with an average of 69%, of which the blast cells and immature forms were predominant. (6) No destruction of bones was shown on X-ray film in 68.3% patients. (7) The response to chemotherapy was poor with a total response rate of 18% and a mean survival of 2 months. All the above-mentioned clinical features were significantly different from those of MM. In addition, these two diseases were also different in cytology, cytogenetics and ultrastructure. Therefore, PPCL should be considered as a special type of acute leukemia distinct from MM. High dose of alkylating agents in combination with autologous bone marrow transplantation might improve the prognoses.

The Application of Sensitivity Analysis on Comprehensive Transportation Evaluation

Comprehensive transportation evaluation objects using multi-objective decision method is a process of choosing the best one from a few objects through calculating, analyzing, and comparing the index system. The result may be different because of the difference of the index weight and index value. Therefore, sensitivity analysis should be one of the necessary parts of the decision-making. It is desired to give the index with higher sensitivity and its varying scope to control the index strictly during the execution process. This paper derives transfer index weight, which changes the rank evaluation order of the projects. Meanwhile, a simple, effective and practical method based on sensitivity district and sensitivity matrix is proposed for the sensitivity analysis of decision-making. As an example, the index sensitivity in decision-making of some provinces comprehensive transportation objects, and their influence on the final decision are discussed.

The First-Order Comprehensive Sensitivity Analysis Methodology (1^st-CASAM) for Scalar-Valued Responses: II. Illustrative Application to a Heat Transport Benchmark Model

This work illustrates the application of the 1st-CASAM to a paradigm heat transport model which admits exact closed-form solutions. The closed-form expressions obtained in this work for the sensitivities of the temperature distributions within the model to the model’s parameters, internal interfaces and external boundaries can be used to benchmark commercial and production software packages for simulating heat transport. The 1st-CASAM highlights the novel finding that response sensitivities to the imprecisely known domain boundaries and interfaces can arise both from the definition of the system’s response as well as from the equations, interfaces and boundary conditions that characterize the model and its imprecisely known domain. By enabling, in premiere, the exact computations of sensitivities to interface and boundary parameters and conditions, the 1st-CASAM enables the quantification of the effects of manufacturing tolerances on the responses of physical and engineering systems.

Synthesis Analysis of Soil Erosion for Three-River Headwater Region Based on GIS

In this paper,based on the common soil erosion model,the Three-River Headwaters region was select for study object. GIS methods are applied to conduct Semi-quantitative assessment for different types of soil erosion,and some results are concluded. The water erosion occurs in High Mountain and extra-high mountain of Yushu,Nangqian,Banma and Jiuzhi County in the southeast and south of the Three-River Headwaters region. The degree of erosion is prone to topography,precipitation,river and human activity. The freeze-thaw erosion mainly distributes in the northwest of the Three-River Headwaters region. The area of middle and above middle erosion degree accounts for roughly 50%.

Hierarchical Privacy Protection Model in Advanced Metering Infrastructure Based on Cloud and Fog Assistance

The Advanced Metering Infrastructure(AMI),as a crucial subsystem in the smart grid,is responsible for measuring user electricity consumption and plays a vital role in communication between providers and consumers.However,with the advancement of information and communication technology,new security and privacy challenges have emerged for AMI.To address these challenges and enhance the security and privacy of user data in the smart grid,a Hierarchical Privacy Protection Model in Advanced Metering Infrastructure based on Cloud and Fog Assistance(HPPM-AMICFA)is proposed in this paper.The proposed model integrates cloud and fog computing with hierarchical threshold encryption,offering a flexible and efficient privacy protection solution that significantly enhances data security in the smart grid.The methodology involves setting user protection levels by processing missing data and utilizing fuzzy comprehensive analysis to evaluate user importance,thereby assigning appropriate protection levels.Furthermore,a hierarchical threshold encryption algorithm is developed to provide differentiated protection strategies for fog nodes based on user IDs,ensuring secure aggregation and encryption of user data.Experimental results demonstrate that HPPM-AMICFA effectively resists various attack strategies while minimizing time costs,thereby safeguarding user data in the smart grid.

Planetary health risks in urban agriculture

Urban agriculture is gaining recognition for its potential contributions to environmental resilience and climate change adaptation,providing advantages such as urban greening,reduced heat island effects,and decreased air pollution.Moreover,it indirectly supports communities during weather events and natural disasters,ensuring food security and fostering community cohesion.However,concerns about planetary health risks persist in highly urbanized and climate-affected areas.Employing electronic databases such as Web of Science and PubMed and adhering to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines,we identified 55 relevant papers to comprehend the planetary health risks associated with urban agriculture,The literature review identified five distinct health risks related to urban agriculture:(1)trace metal risks in urban farms;(2)health risks associated with wastewater irrigation;(3)zoonotic risks;(4)other health risks;and(5)social and economic risks.The study highlights that urban agriculture,while emphasizing environmental benefits,particularly raises concerns about trace metal bioaccumulation in soil and vegetables,posing health risks for populations.Other well studied risks included wastewater irrigation and backyard livestock farming.The main limitations in the available literature were in studying infectious diseases and antibiotic resistance associated with urban agriculture.

Transcriptome analysis of adherens junction pathway-related genes after peripheral nerve injury

The neural regeneration process is driven by a wide range of molecules and pathways. Adherens junctions are critical cellular junctions for the integrity of peripheral nerves. However, few studies have systematically characterized the transcript changes in the adherens junction pathway following injury. In this study, a rat model of sciatic nerve crush injury was established by forceps. Deep sequencing data were analyzed using comprehensive transcriptome analysis at 0, 1, 4, 7, and 14 days after injury. Results showed that most individual molecules in the adherens junctions were either upregulated or downregulated after nerve injury. The m RNA expression of ARPC1 B, ARPC3, TUBA8, TUBA1 C, CTNNA2, ACTN3, MET, HGF, NME1 and ARF6, which are involved in the adherens junction pathway and in remodeling of adherens junctions, was analyzed using quantitative real-time polymerase chain reaction. Most of these genes were upregulated in the sciatic nerve stump following peripheral nerve injury, except for CTNNA2, which was downregulated. Our findings reveal the dynamic changes of key molecules in adherens junctions and in remodeling of adherens junctions. These key genes provide a reference for the selection of clinical therapeutic targets for peripheral nerve injury.

Evaluation and Selection of Sealants and Fillers Using Principal Component Analysis for Cracks in Asphalt Concrete Pavements

The objective of this paper was to develop a comprehensive evaluation method and index to evaluate the performance of sealants and fillers for cracks in asphalt concrete pavements using the method of principal component analysis. The performance experiments including cone penetration, softening point, flow, resilience and tension at low temperature respectively were conducted by reference of ASTM D5329 for eight sealants and fillers often used in China. There by a principal component model was developed and weight of every index was calculated. The experimental results show that there are significantly different performances for sealants and fillers often used in China. Principal component analysis is an objective method that evaluates and selects the performance of sealants and fillers for cracks in asphalt concrete pavements.

Property analysis of bistatic forward-looking SAR with arbitrary geometry

Bistatic forward-looking synthetic aperture radar（SAR） has many advantages and applications owing to its twodimensional imaging capability.There could be various imaging configurations because of the geometric flexibility of bistatic platforms,resulting in kinds of models built independently among which there could be some similar even the same motion features.Comprehensive research on such systems in a more comprehensive and general point of view is required to address their difference and consistency.Property analysis of bistatic forwardlooking SAR with arbitrary geometry is achieved including stripmap and spotlight modes on airborne platform,missile-borne platform,and hybrid platform of both.Emphasis is placed on azimuth space variance of some key parameters significantly affecting the subsequent imaging processing,based on which the frequency spectra are further described and compared considering respective features of different platforms for frequency imaging algorithm developing.Simulation results confirm the effectiveness and correctness of our analysis.

Applicable conditions for a classification system of aquifer-protective mining in hallow coal seams

Based on the conclusions of domestic and foreign research, we have analyzed the collapse-fall characteristics of overlying strata and the mechanism of aquifer-protective mining in shallow coal seam working faces at the Shendong Mine. We have selected the height of the water-conducting fracture zone in overlying strata as a composite index and established the applicable conditions of aquifer-protective mining in shallow coal seams with a multi-factor synthetic-index classification method. From our calculations and analyses of variance, we used factors such as the overlying strata strength, mining disturbing factors and rock integrity as related factors of the composite index. We have classified the applicable conditions of aquifer-protective mining in shallow coal seams into seven types by comparing the result of the height of water-conducting fractured zones of long-wall and short-wall working faces with the thickness of the bedrock, the thickness of the weathered zone and the size of safety coal-rock pillars. As a result, we propose the preliminary classification system of aquifer-protective mining in shallow coal seams. It can provide a theoretical guidance for safe applications of aquifer-protective mining technology in shallow coal seams under similar conditions.

Illustrative Application of the 2^nd-Order Adjoint Sensitivity Analysis Methodology to a Paradigm Linear Evolution/Transmission Model: Reaction-Rate Detector Response

This work continues the illustrative application of the “Second Order Comprehensive Adjoint Sensitivity Analysis Methodology” (2nd-CASAM) to a benchmark mathematical model that can simulate the evolution and/or transmission of particles in a heterogeneous medium. The model response considered in this work is a reaction-rate detector response, which provides the average interactions of particles with the respective detector or, alternatively, the time-average of the concentration of a mixture of substances in a medium. The definition of this model response includes both uncertain boundary points of the benchmark, thereby providing both direct and indirect contributions to the response sensitivities stemming from the boundaries. The exact expressions for the 1st- and 2nd-order response sensitivities to the boundary and model parameters obtained in this work can serve as stringent benchmarks for inter-comparing the performances of all (deterministic and statistical) sensitivity analysis methods.