Analyzing crude oils from the Junggar Basin(NW China) using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry(GC×GC-TOFMS)

As a new technology of analyzing crude oils, comprehensive two-dimensional gas chromatography cou- pled with time-of-flight mass spectrometry （GCxGC- TOFMS） has received much research attention. Here we present a case study in the Junggar Basin of NW China. Results show that the hydrocarbons, including saturates and aromatics, were all well-separated without large co- elution, which cannot be realized by conventional one-dimensional GC-MS. The GC×GC technique is especially effective for analyzing aromatics and low-to-middle- molecular-weight hydrocarbons, such as diamondoids. The geochemical characteristics of crude oils in the study area were investigated through geochemical parameters extracted by GC×GC-TOFMS, improving upon the understanding obtained by GC-MS. Thus, the work here represents a new successful application of GC×GC- TOFMS, showing its broad usefulness in petroleum geochemistry.

Identification and Characterization of Sulfur Compounds in Straight-Run Diesel Using Comprehensive Two-Dimensional GC Coupled with TOF MS

The solid-phase extraction using Pd-Al2O3 as the stationary phase was employed to pre-separate the sulfur compounds in straight-run diesel. The isolating effect was evaluated quantitatively by gas chromatography with a sulfur chemiluminescence detector to harvest a satisfactory result. The identification of the structure of sulfur compounds by comprehensive two-dimensional gas chromatography coupled with the time-of-flight mass spectrometry indicated that cyclo-sulfides, benzothiophenes, dibenzothiophenes, dihydro-benzothiophenes and tetrahydro-dibenzothiophenes were included in straightrun diesel obtained from the Arab medium crude(AM). A total of 259 individual compounds were detected and their molecular structures were identified. The analytical method was approved as an effective way to characterize the composition of sulfur compounds, which reduced the interference of other compounds, facilitated the data presentation and provided more detailed information about molecular composition of sulfur compounds.

Identification of petroleum aromatic fraction by comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry(GC×GC-TOFMS) is commercially available in the 1990s,with the characteristics of large peak capacity,high resolution,high sensitivity,etc.However,its application to the petroleum and geological analyses is just emerging in China and overseas.In this research,the analytical method for petroleum aromatic fraction using GC×GC-TOFMS is set up,via the choice of the column system and optimization of setting parameters,such as temperature programming,modulation time,hot pulse time,flow rate of carrier gas,data acquisition rate and data processing.The results indicate that different polar compounds of aromatic fraction distribute as bands on structured GC×GC chromatogram.Within each band,homologous compounds appear as a roof-tile structure based on the number of substituent residues.The aromatic compounds are identified and characterized according to the GC×GC chromatogram and mass spectra.According to the polarity and the number of rings,aromatic compounds are spatially present on one chromatogram,which directly reflects the distribution characteristics of complex compounds of aromatic hydrocarbons.In addition,quantitative analysis is favored as some overlapped peaks on traditional GC-MS chromatogram have been separated completely on GC×GC.Some heterocyclic atom aromatic compounds at trace level can be clearly identified using this method,for polarity differences from other interfered aromatic compounds.The development of this method and chromatogram recognition offer petroleum geologists a practical example for the application performance of GC×GC-TOFMS.

Comparison of geochemical parameters derived from comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry and conventional gas chromatography-mass spectrometry

The saturated and aromatic hydrocarbon fractions of crude oil samples have been analyzed by using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry （GCxGC-TOFMS） and conventional gas chro- matography-mass spectrometry （GC-MS）. In order to investigate the consistency and discrepancy of the obtained data from the two instruments, some petroleum geochemical parameters have been compared. A comparison of 23 geochemical parameters indicates that 10 parameters are comparable from the two instruments with less than 5% deviations. Therefore, GCxGC-TOFMS is equivalent to conventional GC-MS in some geochemical parameter acquisitions. However, the other 13 parameters are discrepant, including gammacerane / αβ-hopane, Ts/Tm, 2-ethyl-naphthalene / 1-ethyl-naphthalene （ENR）, （2, 6-dimethyl-naphthalene ＋2,7-dimethyl-naphthalene） / 1,5-dimethyl-naphthalene （DNR）, etc. Furthermore, compared to GCxGC-TOFMS, some low concentration compounds could not be detected by the conventional GC-MS, which results in the missing of related geochemical data. Normally, this is caused by the limited separation power and peak capacity of the conventional GC column. Besides, the co-eluting peak integrations are also affected significantly due to the incomplete separation of the compounds. Some low concentration compounds might not be detected because of the interference from the baseline noise or from other substances. GCxGC-TOFMS prevails in compound separation against the conventional GC-MS by avoiding co-elution, which achieves more accurate and precise peak area measurement with the presence of a true baseline. So petroleum geochemical parameters obtained from the GCxGC-TOFMS GCxGC-TOFMS may become one of the most effective analytical are more reliable than those from the conventional GC-MS tools for the oil and gas geochemical study.

Un raveling the acetals as ageing markers of Chinese Highland Qingke Baijiu using comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry combined with metabolomics approach

Objectives:The ageing process has a significant impact on the aroma of Chinese Baijiu,which could strengthen the desirable flavor characteristics and reduce the undesirable ones.The aim of this study was to observe the in itiation of mean in gful cha nges in volatile fracti on and locate the ageing markers during ageing storage of Chinese Highland Qingke Baijiu.Materials and Methods:Samples of Chinese Qingke Baijiu were aged for 0,1,2,3,4,5,6,7,8,9,10,and 11 mon ths before an alysis.The samples were isolated by liquid-liquid extraction and then analyzed by comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry.The acquired data were processed by untargeted and targeted metabolomics approach to locate the ageing markers.Results:The untargeted metabolomics analysis(hierarchical clustering analysis,HCA)shows that the chemical composition of Qingke Baijiu presents a statistically sigrdficant deviation from the reference scenario after 5 mon ths.Subsequently,supervised statistics analysis(orthogo nal partial least squares discrimination analysis)was performed to locate the markers,which changed sigrdficantly during ageing.Fifteen markers were located,and seven of them were acetals.Notably,1,1-diethoxy-propane,1,1-diethoxy-butane,and 1,1-diethoxy-3-methyl-butane are important contributors to the flavor of Chinese Baijiu.The identified markers were applied for the untargeted metabolomics(HCA),and the results revealed that these markers could divide the Qingke Baijiu into two ageing stages,0-5 months and 6-11 months.Conclusion:The results suggest that it is a valuable tool for monitoring the changes of volatile compounds and locating the age markers in Chinese Baijiu.

Qualitative Analysis of A Sulfur-fumigated Chinese Herbal Medicine by Comprehensive Two-Dimensional Gas Chromatography and High-Resolution Time of Flight MassSpectrometry Using Colorized Fuzzy Difference Data Processing

To investigate the chemical transformation of volatile compounds in sulfur-fumigated Radix Angelicae Sinensis. A comprehensive two-dimensional gas chromatography (GCxGC) and high-resolution time-of-flight mass spectrometry (HR-TOF/MS) with colorized fuzzy difference (CFD) method was used to investigate the effect of sulfur-fumigation on the volatile components from Radix Angelicae Sinensis. Twenty-five compounds that were found in sun-dried samples disappeared in sulfur-fumigated samples. Seventeen volatile components including two sulfur-containing compounds were newly generated for the first time in volatile oils of sulfur-fumigated Radix Angelicae Sinensis. The strategy can be successfully applied to rapidly and holistically discriminate sun-dried and sulfur-fumigated Radix Angelicae Sinensis. GCxGC-HR-TOF/MS based CFD is a powerful and feasible approach for the global quality evaluation of Radix Angelicae Sinensis as well as other herbal medicines.

COMPREHENSIVE TWO-DIMENSIONAL LIQUID CHROMATOGRAPHY COUPLED WITH QUADRUPLE TIME-OF-FLIGHT MASS SPECTROMETRY FOR CHEMICAL CONSTITUENTS ANALYSIS OF TRIPTERYGIUM GLYCOSIDES TABLETS

Comprehensive two-dimensional liquid chromatography platform(LC×LC)coupled with quadrupole time-of-flight(QTOF)mass spectrometry(MS)is developed to separate,identify and relatively determine the chemical constituents of two types of tripterygium glycosides tablets(TGT).The types and relative contents of the constituents discovered in two kinds of TGT tablets were subsequently compared.C8andC18 column were used for the separation of the first

A GC×GC-ToFMS Investigation of the Unresolved Complex Mixture and Associated Biomarkers in Biodegraded Petroleum

Heavy biodegraded crude oils have larger numbers of coeluting compounds than nonbiodegraded oils, and they are typically not resolved with conventional gas chromatography（GC）. This unresolved complex mixture（UCM） has been investigated using comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry（GC×GC-To FMS） within a set of biodegraded petroleums derived from distinct sedimentary basins, including northwestern Sichuan（Neoproterozoic, marine）, Tarim（Early Paleozoic, marine）, Bohai Bay（Eocene, saline/brackish） and Pearl River Mouth（Eocene, freshwater）. In general, the hydrocarbons that constitute the UCM in petroleum saturate fractions can be classified into three catalogues based on the distributions of resolved compounds on two dimensional chromatograms. Group 1 is composed mainly of normal and branched alkanes, isoprenoid alkanes and monocyclic alkanes; Group 2 comprises primarily terpanes ranging from two to five rings, and Group 3 is dominated by monoaromatic hydrocarbons such as tetralins and monoaromatic steranes. In addition, the UCM is source dependent and varies between oil populations. i.e., the UCM of petroleum derived from Precambrian and Early Paleozoic marine, Eocene saline/brackish and freshwater source rocks is specifically rich in higher homologues of A-norsteranes, series of 1,1,3-trimethyl-2-alkylcyclohexanes（carotenoid-derived alkanes）, and tetralin and indane compounds, respectively.

Analysis of black-streak defects on food-container screw caps

The cause of black-streak defects on food-container screw caps is analyzed by two-dimensional gas chromatography time-of-flight mass spectrometry,morphological analysis,and energy-dispersive X-ray spectroscopy.An immersion experiment was conducted with the cap immersed in different concentrations of acetic acid to simulate the growth of black streaks.The experimental results show that the acetic acid concentration in food is closely related to the appearance of the black-streak defects.Acetic acid is speculated to permeate into the gaps of the cap,followed by the formation of ferric acetate(light brown solid).The ferric acetate then breaks through the paint surface and its color coincides with that of the paint,which leads to the formation of the black-streak defects.

Insight of unresolved complex mixtures of saturated hydrocarbons in heavy oil via GC×GC-TOFMS analysis

The saturated hydrocarbon fraction of a heavily biodegraded crude oil from Liaohe oilfield was analyzed by using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC×GC-TOFMS). The "humps", which was termed as unresolved complex mixtures (UCMs) in conventional gas chromatographic analysis, was separated for identification of the individual compound. Main compounds of UCMs were identified according to the combined information of characteristics of GC×GC chromatogram and time-of-flight mass spectra. It's found that UCMs are mainly composed of great number of ring compounds with extremely low concentration. The ring compounds are separated according to their boiling point diversity in the first dimension column, then to their polarity or ring number variety in the second dimension column. In the sample there are two groups of UCMs, i.e., the first group compounds with boiling point lower that of C24 and the second group compounds with boiling point higher than that of C24. The first group of UCMs mainly consists of monocyclic, bicyclic and tricyclic ring compounds. The first group of UCMs is mainly composed of saturated hydrocarbons, in which the percentage of ring compounds with signal-to-noise ratio above 100 is about 75% of the total quantity of saturated hydrocarbon, while its mass is over 80% of the total saturated hydrocarbon. The second group of UCMs is mainly composed of tetracyclic and pentacyclic ring compounds, in which the percentage of UCM compounds with signal-to-noise ratio over 100 is about 17% of the total quantity of saturated hydrocarbon, and its mass is about 0.5% of the total saturated hydrocarbon. The results of this study are helpful for heavy oil developing and genesis mechanism understanding.