Compression Properties and Energy Absorption of A Novel Double Curved Beam Negative Stiffness Honeycomb Structures

This paper presents the design of a novel honeycomb structure with a double curved beam.The purpose of this design is to achieve vibration isolation for the main engine of an offshore platform and reduce impact loads.An analytical formula for the force-displacement relationship of the honeycomb single-cell structure is presented based on the modal superposition method.This formula provides a theoretical basis for predicting the compression performance of honeycomb structures.The effects of structural geometric parameters,series and parallel connection methods on the mechanical and energy absorption properties are investigated through mathematical modeling and experimental methods.Furthermore,the study focuses on the vibration isolation and impact resistance performance of honeycomb panels.The results show that the designed honeycomb structure has good mechanical and energy absorption performance,and its energy absorption effect is related to the geometric parameters and series and parallel connection methods of the structure.The isolation efficiency of the honeycomb with 4 rows and 3 columns reaches 38%.The initial isolation frequency of the isolator is 11.7 Hz.

Prediction of Load-Displacement Curve of Flexible Pipe Carcass Under Radial Compression Based on Residual Neural Network

The carcass layer of flexible pipe comprises a large-angle spiral structure with a complex interlocked stainless steel cross-section profile, which is mainly used to resist radial load. With the complex structure of the carcass layer, an equivalent simplified model is used to study the mechanical properties of the carcass layer. However, the current equivalent carcass model only considers the elastic deformation, and this simplification leads to huge errors in the calculation results. In this study, radial compression experiments were carried out to make the carcasses to undergo plastic deformation. Subsequently, a residual neural network based on the experimental data was established to predict the load-displacement curves of carcasses with different inner diameter in plastic states under radial compression.The established neural network model’s high precision was verified by experimental data, and the influence of the number of input variables on the accuracy of the neural network was discussed. The conclusion shows that the residual neural network model established based on the experimental data of the small-diameter carcass layer can predict the load-displacement curve of the large-diameter carcass layer in the plastic stage. With the decrease of input data, the prediction accuracy of residual network model in plasticity stage will decrease.

Comparative Analysis of Equal and Unequal Grounding Grid Configurations by Compression Ratio and Least Square Curve Fitting Techniques

The primary aim of the power system grounding is to safeguard the person and satisfying the performance of the power systemtomaintain reliable operation.With equal conductor spacing grounding grid design,the distribution of the current in the grid is not uniform.Hence,unequal grid conductor span in which grid conductors are concentrated more at the periphery is safer to practice than equal spacing.This paper presents the comparative analysis of two novel techniques that create unequal spacing among the grid conductors:the least-square curve fitting technique and the compression ratio techniquewith equal grid configuration for both square and rectangular grids.Particle Swarm Optimization(PSO)is adopted for finding out one optimal feasible solution among many feasible solutions of equal grid configuration for both square and rectangular grids.Comparative analysis is also carried out between square and rectangular grids using the least square curve fitting technique as it results in only one unequal grid configuration.Simulation results are obtained by theMATLAB software developed.Percentage of improvement in ground potential rise,step voltage,touch voltage,and grid resistancewith variation in compression ratios are plotted.

The Complete Stress-strain Curve of Recycled Aggregate Concrete under Uniaxial Compression Loading

The mechanical performance of recycled aggregate concrete （RAC） is investigated. An experiment on the complete stress-strain curve under uniaxial compression loading of RAC is carried out. The experimental results indicate that the peak stress, peak strain, secant modulus of the peak point and original point increase with the strength grade of RAC enhanced. On the contrary, the residual stress of RAC decreases with the strength grade enhancing, and the failure of RAC is often broken at the interface between the recycled aggregate and the mortar matrix. Finally, the constitutive model of stress-strain model of RAC has been constituted, and the results from the constitutive model of stress-strain meet the experiment results very well.

Improving the Transmission Security of Vein Images Using a Bezier Curve and Long Short-Term Memory

The act of transmitting photos via the Internet has become a routine and significant activity.Enhancing the security measures to safeguard these images from counterfeiting and modifications is a critical domain that can still be further enhanced.This study presents a system that employs a range of approaches and algorithms to ensure the security of transmitted venous images.The main goal of this work is to create a very effective system for compressing individual biometrics in order to improve the overall accuracy and security of digital photographs by means of image compression.This paper introduces a content-based image authentication mechanism that is suitable for usage across an untrusted network and resistant to data loss during transmission.By employing scale attributes and a key-dependent parametric Long Short-Term Memory(LSTM),it is feasible to improve the resilience of digital signatures against image deterioration and strengthen their security against malicious actions.Furthermore,the successful implementation of transmitting biometric data in a compressed format over a wireless network has been accomplished.For applications involving the transmission and sharing of images across a network.The suggested technique utilizes the scalability of a structural digital signature to attain a satisfactory equilibrium between security and picture transfer.An effective adaptive compression strategy was created to lengthen the overall lifetime of the network by sharing the processing of responsibilities.This scheme ensures a large reduction in computational and energy requirements while minimizing image quality loss.This approach employs multi-scale characteristics to improve the resistance of signatures against image deterioration.The proposed system attained a Gaussian noise value of 98%and a rotation accuracy surpassing 99%.

Unified analytical stressstrain curve for quasibrittle geomaterial in uniaxial tension, direct shear and uniaxial compression

Considering strain localization in the form of a narrow band initiated just at peak stress, three analytical expressions for stressstrain curves of quasibrittle geomaterial (such as rock and concrete) in uniaxial tension, direct shear and uniaxial compression were presented, respectively. The three derived stressstrain curves were generalized as a unified formula. Beyond the onset of strain localization, a linear strain-softening constitutive relation for localized band was assigned. The size of the band was controlled by internal or characteristic length according to gradient-dependent plasticity. Elastic strain within the entire specimen was assumed to be uniform and decreased with the increase of plastic strain in localized band. Total strain of the specimen was decomposed into elastic and plastic parts. Plastic strain of the specimen was the average value of plastic strains in localized band over the entire specimen. For different heights, the predicted softening branches of the relative stressstrain curves in uniaxial compression are consistent with the previously experimental results for normal concrete specimens. The present expressions for the post-peak stressdeformation curves in uniaxial tension and direct shear agree with the previously numerical results based on gradient-dependent plasticity.

An analytical p-y curve method based on compressive soil pressure model in sand soil

With the high-quality development of urban buildings,higher requirements are come up with for lateral bearing capacity of laterally loaded piles.Consequently,a more accurate analysis to predict the lateral response of the pile within an allowable displacement is an important issue.However,the current p-y curve methods cannot fully take into account the pile-soil interaction,which will lead to a large calculation difference.In this paper,a new analytical p-y curve is established and a finite difference method for determining the lateral response of pile is proposed,which can consider the separation effect of pile-soil interface and the coefficient of circumferential friction resistance.In particular,an analytical expression is developed to determine the compressive soil pressure by dividing the compressive soil pressure into two parts:initial compressive soil pressure and increment of compressive soil pressure.In addition,the relationship between compressive soil pressure and horizontal displacement of the pile is established based on the reasonable assumption.The correctness of the proposed method is verified through four examples.Based on the verified method,a parametric analysis is also conducted to investigate the influences of factors on lateral response of the pile,including internal friction angle,pile length and elastic modulus of pile.

Determination of Material Parameters of EVA Foam under Uniaxial Compressive Testing Using Hyperelastic Models

The objective of this research was to determine the mechanical parameter from EVA foam and also investigate its behavior by using Blatz-Ko,Neo-Hookean,Mooney model and experimental test.The physical characteristic of EVA foam was also evaluated by scanning electron microscopy(SEM).The results show that Blatz-Ko and Neo-Hookean model can fit the curve at 5%and 8%strain,respectively.The Mooney model can fit the curve at 50%strain.The modulus of rigidity evaluated from Mooney model is 0.0814±0.0027 MPa.The structure of EVA foam from SEM image shows that EVA structure is a closed cell with homogeneous porous structure.From the result,it is found that Mooney model can adjust the data better than other models.This model can be applied for mechanical response prediction of EVA foam and also for reference value in engineering application.

An h-Adaptivity DG Method on Locally Curved Tetrahedral Mesh for Solving Compressible Flows

For the numerical simulation of compressible flows,normally different mesh sizes are expected in different regions.For example,smaller mesh sizes are required to improve the local numerical resolution in the regions where the physical variables vary violently(for example,near the shock waves or in the boundary layers)and larger elements are expected for the regions where the solution is smooth.h-adaptive mesh has been widely used for complex flows.However,there are two difficulties when employing h-adaptivity for high-order discontinuous Galerkin(DG)methods.First,locally curved elements are required to precisely match the solid boundary,which significantly increases the difficulty to conduct the"refining"and"coarsening"operations since the curved information has to be maintained.Second,h-adaptivity could break the partition balancing,which would significantly affect the efficiency of parallel computing.In this paper,a robust and automatic h-adaptive method is developed for high-order DG methods on locally curved tetrahedral mesh,for which the curved geometries are maintained during the h-adaptivity.Furthermore,the reallocating and rebalancing of the computational loads on parallel clusters are conducted to maintain the parallel efficiency.Numerical results indicate that the introduced h-adaptive method is able to generate more reasonable mesh according to the structure of flow-fields.

Compression characteristics of saturated re-compacted glacial tills in Tianmo Gully of Tibet, China

Glacial tills are highly compressible soils composed of loosely cemented sandy silt particles.Their role,for instance,as initial filler materials in geo-technical projects along temperate glacier regions warrant a systematic evaluation of their compressive characteristics.As such,we carry out a series of onedimensional compression tests on re-compacted glacial till samples obtained from Tianmo Gully,Tibet,with the aims of evaluating their compressive behavior under controlled initial stress conditions.The yield stress was determined from the void ratio versus consolidation pressure(e-log)planes.Its compression and swelling behaviors were observed during the primary and secondary compressions of the consolidation tests.From the compression curves,a correlation can be found between the consolidation stress and the void index.In addition,we find that the compression curves of glacial tills collapse into a single curve when normalized by the compression index.The experimental results in this study provide a basic understanding of the compression characteristics of the glacial tills in Tibet,China.

The Testing Strength Curves of Lightweight Aggregate Concrete by Rebound Method and Ultrasonic-rebound Combined Method

The strength curves of lightweight aggregate concrete （LWAC） were tested based on detecting LWAC with density of 1 400-1 900 kg/m3 and LWAC with strength grade of LC15-LC50 by rebound method and ultrasonic-rebound combined method.The results show that the common measured strength curves tested by above two methods can not satisfy the required accuracy of LWAC strength test.In addition,specified compressive strength curves of testing LWAC by rebound method and ultrasonic-rebound combined method are obtained,respectively.

Deformability characteristics of jointed rock masses under uniaxial compression

We investigated the combined influence of joint inclination angle and joint continuity factor on deforma- tion behavior of jointed rock mass for gypsum specimens with a set of non-persistent open flaws in uni- axial compression. Complete axial stress-strain curves were classified into four types, i.e., single peak, softening after multi-peak yield platform, hardening after multi-peak yield platform and multi-peak dur- ing softening. Observation of crack evolution on the specimen surface reveals that the deformation behavior is correlated to the closure of pre-existing joint, development of fractures in rock matrix and teeth shearing of the shear plane. To investigate the brittleness of the specimens, the ratio of the residual strength to the maximum peak strength as well as the first and last peak strains were studied. At the same joint inclination angle, the ratios between residual strength and the maximum peak strength and the last peak strains increased while the first peak strain decreased with the increase of joint continuity factor. At the same joint continuity factor, the curves of the three brittleness parameters vs. joint inclina- tion angle can either be concave or convex single-oeak or wave-shaoed.

Analysis of One-Dimensional Compression under a Wide Range of Stress with Densely Arrayed BPM

In this paper,the densely arrayed bonded particle model is proposed for simulation of granular materials with discrete element method(DEM)considering particle crushing.This model can solve the problem of pore calculation after the grains are crushed,and reduce the producing time of specimen.In this work,several one-dimensional compressing simulations are carried out to investigate the effect of particle crushing on mechanical properties of granular materials under a wide range of stress.The results show that the crushing process of granular materials can be divided into four different stages according to er-logσy curves.At the end of the second stage,there exists a yield point,after which the physical and mechanical properties of specimens will change significantly.Under extremely high stress,particle crushing will wipe some initial information of specimens,and specimens with different initial gradings and void ratios present some similar characteristics.Particle crushing has great influence on grading,lateral pressure coefficient and compressibility of granular materials,and introduce extra irreversible volume deformation,which is necessary to be considered in modelling of granular materials in wide stress range.

Sheet metal hardening curve determined by laminated sample and its adaptability to sheet forming processes

The hardening curve for sheet metal can be determined from the load-displacement curve of tensile specimen with rectangular cross-section. Therefore,uniaxial compression test on cylinder specimen made from laminated sample is put forward. Considering the influence of anisotropy on hardening properties and the stress state in popular forming process,plane strain compression test on cubic specimen made from laminated sample was advanced. Results show that the deformation range of hardening curves obtained from the presented methods is wide,which meets the need for the application in sheet metal forming processes. In view of the characteristics of methods presented in the paper and the stress strain state of various forming processes,the adaptability of the two methods presented in this paper is given.

THE TECHNIQUE OF QUASI-LOSSLESS COMPRESSION OF THE REMOTE SENSING IMAGE

In this paper,the technique of quasi_lossless compression based on the image restoration is presented.The technique of compression described in the paper includes three steps,namely bit compression,correlation removing and image restoration based on the theory of modulation transfer function (MTF).The quasi_lossless compression comes to a high speed.The quality of the reconstruction image under restoration is up to par of the quasi_lossless with higher compression ratio.The experiments of the TM and SPOT images show that the technique is reasonable and applicable.

Stress-strain Model of Corroded Concrete under Uniaxial Compressive Loading

The prism specimens of corroded concrete were subjected to uniaxial compressive load to develop the stress-strain model. Compared to the un-corroded concrete, the mechanical prop- erties of corroded concrete, such as peak strength, Young＇s modulus, and residual deformation, et al are degraded. The concrete, which were subjected to the aggressive media in the environment, were resulted in randomly distributed pre-loading flaws and defects. The propagation of these corrosion flaws during the procedure of loading was the main reason of degradation of corroded concrete properties. By the application of the statistic theory of continuum damage, the compressive stress-strain curve of corroded concrete was simulated. The initial damage factor was introduced to represent the corrosive effects of different media. The present damage constitutive model agreed well with the test results.

Spanning Pre-disks in a Compression Body

A properly embedded essential planar surface P（not a disk） in a compression body V is called a spanning pre-disk with respect to J, if one boundary component of P is lying in ?;V and all other boundary components of P are lying in?;V and coplanar with J. In this paper, we show that the number of boundary components of spanning pre-disks in a compression body is unbounded. But the number of a maximal collection of spanning pre-disks is bounded.

Mesoscale Modeling of Hooked-End Steel Fiber Reinforced Concrete under Uniaxial Compression Using Cohesive Elements

Based on the cohesive zone model, the 2D mesostructures were developed for numerical studies of multi-phase hooked-end steel fiber reinforced concrete under uniaxial compression. The zero-thickness cohesive interface elements were inserted within the mortar, on interfaces of mortar and aggregates and interfaces of mortar and fibers to simulate the failure process of fiber reinforced concrete. The results showed that the numerical results matched well the experimental results in both failure modes and stress-strain behavior. Hooked-end steel fiber reinforced concrete exhibited ductile failure and maintained integrity during a whole failure process. Compared with normal concrete, HES fiber reinforced concrete was greater stiffness and compressive strength;the descending branch of the stress-strain curve was significantly flatter;the residual stress was higher.

MRI三维重建技术在颅神经血管压迫综合征中的应用价值

目的探讨MRI三维重建技术在颅神经血管压迫综合征责任血管识别和神经受压判定中的应用价值。方法在微血管减压术前对91例三叉神经痛及72例面肌痉挛患者行桥小脑角池段颅神经和血管成像,将获得的MRI原始数据分别进行二维和三维水平(曲面及仿真内窥镜)重建,多维度评价责任血管的数目、来源和颅神经受压程度,并将影像诊断结果与术中所见进行比较。结果三维重建技术对三叉神经痛责任血管的正确识别率为95.6%,对血管压迫神经判定的准确性为94.5%。此技术对面肌痉挛责任血管的正确识别率为91.7%,对血管压迫神经判定的准确性为89.5%。三维重建技术对责任血管与颅神经单纯性接触的判定准确率明显高于二维图像(P<0.05)。结论MRI三维重建技术可以提高责任血管识别的正确率,更加准确地检测颅神经受压程度,对于多支责任血管造成的颅神经复杂性压迫更为适用。

准静态压缩下“EPE/瓦楞纸板”缓冲系统能量吸收的研究

本研究主要探讨了发泡类材料与瓦楞纸板的共同缓冲作用。本研究将“EPE/瓦楞纸板”看作缓冲包装系统,并对其进行准静态压缩试验,得到材料的应力-应变曲线和能量吸收图,探究环境温度、EPE密度、EPE厚度对缓冲包装系统力学性能、能量吸收性能的影响。在应变为0.6时,组合缓冲系统(EPE_3、EPE_5)标准化能量(W/Es)吸收分别为0.2266、0.2024,较对照组EPE(W/Es=0.1835)增加了23.5%、10.3%;应变为0.6时,随着温度由-20℃增加至23℃、40℃,EPE_3吸收的标准化能量明显减小,EPE_3吸收的能量分别减少17.7%、20.9%,而EPE_5吸收的能量分别减少11.8%、19.9%;在上述应变状态下,EPE密度为24g/cm3的试样组合缓冲系统(EPE_3、EPE_5)具有最高的标准化能量吸收,分别为0.1916、0.1745;EPE厚度为30mm、40mm、50mm的组合材料(EPE_3、EPE_5)能量吸收曲线(W/Es-ε)重合度较高。瓦楞纸板在组合缓冲系统(EPE_3、EPE_5)中的缓冲作用不可被忽略;温度升高,组合缓冲系统的能量吸收会减少;EPE密度对组合缓冲系统力学性能有影响且存在“阈值效应”。EPE厚度对组合缓冲系统的力学性能影响不显著,增加EPE厚度会导致能量吸收曲线(W/Es-σ/Es)趋于平滑,使得最佳吸能点难以辨识。