The fatigue crack growth rate (CGR) of ultra high strength steel 30CrMnSiNi2A in distilled water at 18,35 and 55℃ were measured.It was confirmed that the temperature is strongly af- fected on the corrosion fatigue CG...The fatigue crack growth rate (CGR) of ultra high strength steel 30CrMnSiNi2A in distilled water at 18,35 and 55℃ were measured.It was confirmed that the temperature is strongly af- fected on the corrosion fatigue CGR of ultra high strength steel.An expression concerning the effects of Δ K and temperature on the CGR was proposed.The fact that the apparent activation energy (36.6 kJ/mol) resulted from regressive analysis of CGR data was similar to the activation energy of hydrogen diffusion in γ-Fe,strongly supporting the theory of hydrogen-assisted crack growth.The overload retardation effect was greatly reduced in cor- rosion fatigue crack growth,especially at lower frequency,e.g.,0.1 Hz.This phenomenon might be due to the increase of the SCC component of CGR after an overload.展开更多
The effect of single overload on the fatigue crack growth in 2024-T3 and 7075-T6 Al alloys was analyzed.Fatigue tests under constantamplitude loading with overload peak were carried out on V-notched specimens.Fractogr...The effect of single overload on the fatigue crack growth in 2024-T3 and 7075-T6 Al alloys was analyzed.Fatigue tests under constantamplitude loading with overload peak were carried out on V-notched specimens.Fractographic analysis was used as a principal approach to explain the crack growth retardation due to the overload.Scanning electron microscopy(SEM)analyses were conducted on the fractured surface of failed specimens to study the retardation effect.The obtained results show that the overload application generates a plastic zone in both aluminum alloys.The generated plastic zone is three times larger in the case of 2024-T3 compared to 7075-T6,and thus,a significant crack retardation was induced for 2024-T3.The retardation effect due to the overload for 2024-T3 and 7075-T6 lasted for about 10 mm and 1 mm,respectively,from the point of overload application.展开更多
In this study,orthogonal experiments were conducted to investigate the influence of expandable graphite(EG),dimethyl methylphosphonate(DMMP),triethanolamine(TEA),and isocyanate content on the compressive and bonding s...In this study,orthogonal experiments were conducted to investigate the influence of expandable graphite(EG),dimethyl methylphosphonate(DMMP),triethanolamine(TEA),and isocyanate content on the compressive and bonding strengths,oxygen index,and fluidity of rigid polyurethane foam(RPUF).The results revealed that EG significantly increased the oxygen index of RPUF,enlarged the diameter of foam cells,and decreased the cell-closed content in foam;thus,leading to a pressure drop in RPUF.However,excessive EG was capable of reducing the fluidity of polyurethane slurry.TEA exhibited significant influence on the compressive strength of RPUF,which dropped initially,and then increased.DMMP had a remarkable effect on the flame retardant property and compressive strength of RPUF.Compressive strength of RPUF initially displayed an increase followed by a decrease with increasing dosage of DMMP,and achieved the maximum value at DMMP dosage of 4%.DMMP could effectively reduce the diameter of RPUF cells leading to an increase in the percentage of close area in foam.DMMP displayed the flame-retardation effects mainly in the gas phase leading to a significant enhancement in the oxygen index of RPUF.Moreover,the compressive strength and bonding strength of RPUF decrease significantly with the increase of isocyanate content due to the increased blowing efficiency by the CO_2.The oxygen index and flowing length of foam increased with the increase in isocyanate dosage.展开更多
This paper is concerned with fatigue behavior of glass fiber reinforced aluminium laminates (GLARE) under overload fatigue loading. The effect of single overload on the crack growth rates in GLARE was investigated, an...This paper is concerned with fatigue behavior of glass fiber reinforced aluminium laminates (GLARE) under overload fatigue loading. The effect of single overload on the crack growth rates in GLARE was investigated, and the mechanism of the retardation of crack growth determined. Crack growth retardation by overload was observed in GLARE, but much smaller than monolithic metals. The retardation of crack growth in GLARE is only controlled by the effective stress intensity factor experienced by the constituent metals at crack tips.展开更多
Based on a large number of orthogonal tests and theoretical analyses, the retarding mortar which meets the requirements of retard-bonded prestressed concrete was prepared. Initial setting time of the retarding mortar ...Based on a large number of orthogonal tests and theoretical analyses, the retarding mortar which meets the requirements of retard-bonded prestressed concrete was prepared. Initial setting time of the retarding mortar may vary from several hours to 15 d at 5 ℃-35 ℃ due to quantities and average curing temperature. And its 28 d compressive strength is above 35 MPa. Thus the influence of quantities on setting time and 28 d compressive strength, and the relationship between setting time and average curing temperature were investigated. The optimum quantities were obtained by studying the interaction of admixtures, and the retarding mechanism was discussed. Based on 52 retard-bonded prestressed strands by manual work from 24 retard-bonded prestressed concrete T-beams, static friction drag, change factor κ and friction factor μ were obtained from the test when retard-bonded prestressed strands were tensioned. Application of the retarding mortar will be vast in practical concrete projects.展开更多
文摘The fatigue crack growth rate (CGR) of ultra high strength steel 30CrMnSiNi2A in distilled water at 18,35 and 55℃ were measured.It was confirmed that the temperature is strongly af- fected on the corrosion fatigue CGR of ultra high strength steel.An expression concerning the effects of Δ K and temperature on the CGR was proposed.The fact that the apparent activation energy (36.6 kJ/mol) resulted from regressive analysis of CGR data was similar to the activation energy of hydrogen diffusion in γ-Fe,strongly supporting the theory of hydrogen-assisted crack growth.The overload retardation effect was greatly reduced in cor- rosion fatigue crack growth,especially at lower frequency,e.g.,0.1 Hz.This phenomenon might be due to the increase of the SCC component of CGR after an overload.
基金the Deanship of Scientific Research at King Saud University for funding the work through the research group (No. RGP-VPP-035)
文摘The effect of single overload on the fatigue crack growth in 2024-T3 and 7075-T6 Al alloys was analyzed.Fatigue tests under constantamplitude loading with overload peak were carried out on V-notched specimens.Fractographic analysis was used as a principal approach to explain the crack growth retardation due to the overload.Scanning electron microscopy(SEM)analyses were conducted on the fractured surface of failed specimens to study the retardation effect.The obtained results show that the overload application generates a plastic zone in both aluminum alloys.The generated plastic zone is three times larger in the case of 2024-T3 compared to 7075-T6,and thus,a significant crack retardation was induced for 2024-T3.The retardation effect due to the overload for 2024-T3 and 7075-T6 lasted for about 10 mm and 1 mm,respectively,from the point of overload application.
基金supported by the National Natural Science Foundation of China(No.51304027)China Postdoctoral Science Foundation(2014M560567 and 2015T80730)+4 种基金Shandong Province Science and Technology Development Plan(2014GSF120012)the State Key Program of Coal Joint Funds of National Natural Science Foundation of China(Nos.51134020 and U1261205)Shandong Province Natural Science Foundation(No.ZR2011EL036)the Doctoral Scientific Research Foundation of Binzhou University(No.2013Y06)the Key Technology Projects for Preventing Major Accident of National Security State Administration of Work Safety
文摘In this study,orthogonal experiments were conducted to investigate the influence of expandable graphite(EG),dimethyl methylphosphonate(DMMP),triethanolamine(TEA),and isocyanate content on the compressive and bonding strengths,oxygen index,and fluidity of rigid polyurethane foam(RPUF).The results revealed that EG significantly increased the oxygen index of RPUF,enlarged the diameter of foam cells,and decreased the cell-closed content in foam;thus,leading to a pressure drop in RPUF.However,excessive EG was capable of reducing the fluidity of polyurethane slurry.TEA exhibited significant influence on the compressive strength of RPUF,which dropped initially,and then increased.DMMP had a remarkable effect on the flame retardant property and compressive strength of RPUF.Compressive strength of RPUF initially displayed an increase followed by a decrease with increasing dosage of DMMP,and achieved the maximum value at DMMP dosage of 4%.DMMP could effectively reduce the diameter of RPUF cells leading to an increase in the percentage of close area in foam.DMMP displayed the flame-retardation effects mainly in the gas phase leading to a significant enhancement in the oxygen index of RPUF.Moreover,the compressive strength and bonding strength of RPUF decrease significantly with the increase of isocyanate content due to the increased blowing efficiency by the CO_2.The oxygen index and flowing length of foam increased with the increase in isocyanate dosage.
文摘This paper is concerned with fatigue behavior of glass fiber reinforced aluminium laminates (GLARE) under overload fatigue loading. The effect of single overload on the crack growth rates in GLARE was investigated, and the mechanism of the retardation of crack growth determined. Crack growth retardation by overload was observed in GLARE, but much smaller than monolithic metals. The retardation of crack growth in GLARE is only controlled by the effective stress intensity factor experienced by the constituent metals at crack tips.
文摘Based on a large number of orthogonal tests and theoretical analyses, the retarding mortar which meets the requirements of retard-bonded prestressed concrete was prepared. Initial setting time of the retarding mortar may vary from several hours to 15 d at 5 ℃-35 ℃ due to quantities and average curing temperature. And its 28 d compressive strength is above 35 MPa. Thus the influence of quantities on setting time and 28 d compressive strength, and the relationship between setting time and average curing temperature were investigated. The optimum quantities were obtained by studying the interaction of admixtures, and the retarding mechanism was discussed. Based on 52 retard-bonded prestressed strands by manual work from 24 retard-bonded prestressed concrete T-beams, static friction drag, change factor κ and friction factor μ were obtained from the test when retard-bonded prestressed strands were tensioned. Application of the retarding mortar will be vast in practical concrete projects.
