The aerodynamic performance of compressor airfoil is significantly affected by the surface roughness at low Reynolds number(Re).In the present study,numerical simulations have been conducted to investigate the impact ...The aerodynamic performance of compressor airfoil is significantly affected by the surface roughness at low Reynolds number(Re).In the present study,numerical simulations have been conducted to investigate the impact of surface roughness on the profile loss of a high subsonic compressor airfoil at Re=1.5×10^(5).Four roughness locations,covering 10%,30%,50%and 100%of the suction surface from the leading edge and seven roughness magnitudes(Ra)ranging from 52 to525 lm were selected.Results showed that the surface roughness mainly determined the loss generation process by influencing the structure of the Laminar Separation Bubble(LSB)and the turbulence level near the wall.For all the roughness locations,the variation trend for the profile loss with the roughness magnitude was similar.In the transitionally rough region,the negative displacement effect of the LSB was suppressed with the increase of roughness magnitude,leading to a maximum decrease of 14.6%,16.04%,16.45%and 10.20%in the profile loss at Ra=157 lm for the four roughness locations,respectively.However,with a further increase of the roughness magnitude in the fully rough region,the stronger turbulent dissipation enhanced the growth rate of the turbulent boundary layer and increased the profile loss instead.By comparison,the leading edge roughness played a dominant role in the boundary layer development and performance variation.To take fully advantage of the surface roughness reducing profile loss at low Re,the effects of roughness on suppressing LSB and inducing strong turbulent dissipation should be balanced effectively.展开更多
A comparison of the results of a computational simulation and an experimental measurement indicates a good agreement between them： the bowed blade lowers the energy loss coefficient of engine by 11% in the simulation...A comparison of the results of a computational simulation and an experimental measurement indicates a good agreement between them： the bowed blade lowers the energy loss coefficient of engine by 11% in the simulation and by 13% in the measurement. To further discuss the application conditions of bowed blade in compressor, with incidence equal to zero and other boundary conditions unchanged, a computational investigations on four series of linear stators with different aerofoil turning angles are achieved. It is found that the bowed blade has much positive effect in high airfoil turning angle cascade, for example, the optimal retrofit of 30° bow angle highly reduces the energy loss coefficient by 17.9%, when the aerofoil turning angle is 59.5 °. But the optimal retrofit of 15° has only 0.7% reduction when the aerofoil turning angle is 39.5°, or even the compressor performance will get worse with the bow angle gradually increasing. Consequently, it is verified that the turning angle is one of the important factors to decide whether to apply the bowed blade into compressor at low Math number.展开更多
In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes ...In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes installed at the stator leading-edge（LE）.The airfoil-probes have a negative influence on the compressor aerodynamic performance at all operating points.A streamwise vortex is induced by the airfoil-probe along both sides of the blade.At the mid-operating point,the vortex is notable along the pressure side and is relatively small along the suction side（SS）.At the near-stall point,the vortex is slightly suppressed in the pressure surface（PS）,but becomes remarkable in the suction side.A small local-separation is induced by the interactions between the vortex and the end-wall boundary layer in the corner region near the hub.That the positive pitch angle of the airfoil-probe at 6.5% span is about 15° plays an important role in the vortex evolution near the hub,which causes the fact that the airfoil-probe near the hub has the largest effects among the four airfoil-probes.In order to get a further understanding of the vortex evolution in the stator in the numerical simulation,a flow visualization experiment in a water tunnel is performed.The flow visualization results give a deep insight into the evolution of the vortex induced by the airfoil-probe.展开更多
基金the financial support of the National Natural Science Foundation of China (No. 51836008)the National Major Science and Technology Project of China (No. 2017-Ⅱ-0010-0024) for this project。
文摘The aerodynamic performance of compressor airfoil is significantly affected by the surface roughness at low Reynolds number(Re).In the present study,numerical simulations have been conducted to investigate the impact of surface roughness on the profile loss of a high subsonic compressor airfoil at Re=1.5×10^(5).Four roughness locations,covering 10%,30%,50%and 100%of the suction surface from the leading edge and seven roughness magnitudes(Ra)ranging from 52 to525 lm were selected.Results showed that the surface roughness mainly determined the loss generation process by influencing the structure of the Laminar Separation Bubble(LSB)and the turbulence level near the wall.For all the roughness locations,the variation trend for the profile loss with the roughness magnitude was similar.In the transitionally rough region,the negative displacement effect of the LSB was suppressed with the increase of roughness magnitude,leading to a maximum decrease of 14.6%,16.04%,16.45%and 10.20%in the profile loss at Ra=157 lm for the four roughness locations,respectively.However,with a further increase of the roughness magnitude in the fully rough region,the stronger turbulent dissipation enhanced the growth rate of the turbulent boundary layer and increased the profile loss instead.By comparison,the leading edge roughness played a dominant role in the boundary layer development and performance variation.To take fully advantage of the surface roughness reducing profile loss at low Re,the effects of roughness on suppressing LSB and inducing strong turbulent dissipation should be balanced effectively.
基金National Natural Science Foundation of China(50236020).
文摘A comparison of the results of a computational simulation and an experimental measurement indicates a good agreement between them： the bowed blade lowers the energy loss coefficient of engine by 11% in the simulation and by 13% in the measurement. To further discuss the application conditions of bowed blade in compressor, with incidence equal to zero and other boundary conditions unchanged, a computational investigations on four series of linear stators with different aerofoil turning angles are achieved. It is found that the bowed blade has much positive effect in high airfoil turning angle cascade, for example, the optimal retrofit of 30° bow angle highly reduces the energy loss coefficient by 17.9%, when the aerofoil turning angle is 59.5 °. But the optimal retrofit of 15° has only 0.7% reduction when the aerofoil turning angle is 39.5°, or even the compressor performance will get worse with the bow angle gradually increasing. Consequently, it is verified that the turning angle is one of the important factors to decide whether to apply the bowed blade into compressor at low Math number.
基金National Natural Science Foundation of China(51161130525)"111" Project (B08009)
文摘In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes installed at the stator leading-edge（LE）.The airfoil-probes have a negative influence on the compressor aerodynamic performance at all operating points.A streamwise vortex is induced by the airfoil-probe along both sides of the blade.At the mid-operating point,the vortex is notable along the pressure side and is relatively small along the suction side（SS）.At the near-stall point,the vortex is slightly suppressed in the pressure surface（PS）,but becomes remarkable in the suction side.A small local-separation is induced by the interactions between the vortex and the end-wall boundary layer in the corner region near the hub.That the positive pitch angle of the airfoil-probe at 6.5% span is about 15° plays an important role in the vortex evolution near the hub,which causes the fact that the airfoil-probe near the hub has the largest effects among the four airfoil-probes.In order to get a further understanding of the vortex evolution in the stator in the numerical simulation,a flow visualization experiment in a water tunnel is performed.The flow visualization results give a deep insight into the evolution of the vortex induced by the airfoil-probe.
