The computerized LASSI-BC Test versus the Standard LASSI-L Paper-and-Pencil Version in Community-Based-Samples

Proactive Semantic Interference (PSI) and failure to recover from PSI (frPSI), are novel constructs assessed by the LASSI-L. These measures are sensitive to cognitive changes in early Mild Cognitive Impairment (MCI) and preclinical AD determined by Aβ load using PET. The goal of this study was to compare a new computerized version of the LASSI-L (LASSI-Brief Computerized) to the standard paper-and-pencil version of the test. In this study, we examined 110 cognitively unimpaired (CU) older adults and 79 with amnestic MCI (aMCI) who were administered the paper-and-pencil form of the LASSI-L. Their performance was compared with 62 CU older adults and 52 aMCI participants examined using the LASSI-BC. After adjustment for covariates (degree of initial learning, sex, education, and language of evaluation) both the standard and computerized versions distinguished between aMCI and CU participants. The performance of CU and aMCI groups using either form was relatively commensurate. Importantly, an optimal combination of Cued B2 recall and Cued B1 intrusions on the LASSI-BC yielded an area under the ROC curve of .927, a sensitivity of 92.3% and specificity of 88.1%, relative to an area under the ROC curve of .815, a sensitivity of 72.5%, and a specificity of 79.1% obtained for the paper-and-pencil LASSI-L. Overall, the LASSI-BC was comparable, and in some ways, superior to the paper-and-pencil LASSI-L. Advantages of the LASSI-BC include a more standardized administration, suitability for remote assessment, and an automated scoring mechanism that can be verified by a built-in audio recording of responses.

COMPUTER SIMULATION IN MAN-MACHINE-ENVIRONMENT SYSTEM ENGINEERING

The applications and trends of computer simulation of man-machine-en-vironment systems are presented in this paper.Topics such as the modeling of a humanphysiological system,simulation of the nucro-environment in an aireraft cabin,and thecomputer graphic

Micro-computerized Three-dimensional Reconstruction of the Palmar Arteries and Its Clinical Significance

Thirty adult upper extremities were used to study the arteries of the hand byangiography,cross-sectional dissection and three-dimensional reconstruction withmicrocomputer.The arterial skeleton of the palm was composed of superficial,deep anddorsal planes.There were three main anastomotic pathways between the radial and ulnararteries or their branches in the radio-ulnar direction,while in the palmar dorsal dirce-tion there were three anastomotic zones between the palrnar and dorsal arterial plancs.The branches of the deep palmar arch radiated distally,proximally,palmarly anddorsally,so that the arch acted as the center of the arterial network of the hand.Thetransverse arterial allocations in the carpo-metacarpal segment of the palm were four intypes,but in the mid-palmar and metacarpo-phalangcal segments were three only.Accord-ing to the sources,cross-sectional area,irrigation territories and anastomoses of the ar-teries in each segment,the clinical significance in the rcplantation of the amputatcd palmshas been

Screening for lung cancer with chest computerized tomography: Is it cost efficient?

Despite lung cancer(LC) screening by low-dose computerized tomography(LDCT) gaining many proponents worldwide, for many years it was not recognized as a life-prolonging and cost-effective procedure, until recently. Prospective observational studies had not been able to prove that this screening prolongs survival, but they helped to specify the inclusion and exclusion criteria. Long-awaited results of a prospective, randomized trial finally provided the evidence that LC screening with LDCT can prolong survival of the screened population. Several costeffectiveness analyses were performed to justify mass introduction of this screening. Results of these analyses are equivocal, although conclusions highly depend upon inclusion and exclusion criteria, methods of analysis and prices of medical procedures which differ between countries as well as the incidence of other pulmonary nodules, especially tuberculosis. Therefore, costeffectiveness analysis should be performed separately for every country. Cost-effectiveness depends especially upon the rate of false-positive results and the rate of unnecessary diagnostic, screening and treatment procedures. To ensure high cost-effectiveness, LC screening should be performed in accordance with screening protocol, in dedicated screening centers equipped with nodule volume change analysis, or as a prospective non-randomized trial, to ensure compliance with the inclusion and exclusion criteria. To ensure high cost-effectiveness of LC screening, future research should concentrate on determination of highrisk groups and further specifying the inclusion and exclusion criteria.

COMPUTERIZED SIMULATION AND EXPERIMENTAL RESEARCH ON SOFT-SWITCHING ARC WELDING INVERTER POWER SOURCE

Based on the existing component models in the Pspice software package, a combined model for Insulat- ed the Bipolar Transistor (IGBT) is established, in which a non - linear is introduced to represent the parasitic capacitance. Using this model, computerized simulation is conducted for the FB - ZVZCS - PWM soft - ewitching converter,the switching and energy-transferring characteristics of the components are analyzed.The simulation results are testified by experiments.It is proved that by abopting appropriate models,computerized simulation becomes an effective tool for investigation of arc welding inverter power source.

Identification of Porphyra lines using computerized DNA fingerprinting

RAPD (Randomly Amplified Polymorphic DNA) analysis was performed with filaments of 15 Porphyra lines representing four important groups (P. yezoensis, P. haitanensis, P. katadai var. Hemiphylla and P. digospermatangia). Eight stable and repeatable RAPD bands amplified with two primers, OPN-02 and OPJ-18, were selected for the construction of DNA fingerprinting. The RAPD results were scored based on the presence or absence of each of the 8 bands and then converted to computer language expressed with two digitals, 1 and 0, which represented the presence (numbered as 1) or absence (numbered as 0) of each band, respectively. Based on these results, a model DNA fingerprint and a computerized DNA fingerprint were constructed. In the constructed DNA fingerprint, each Porphyra line has its unique fingerprinting pattern and can be easily distinguished from each other. Later, a software, named as PhGI, was designed based on this DNA fingerprinting. It can be used in practical Porphyra line identification.

Adult reference values of the computerized diplopia test

AIM： To estimate the adult reference values for measured deviations by a computerized diplopia test and testify the validity.METHODS： Totally 391 participants were recruited and taken the computerized diplopia test. The plots and amplitude of deviations were recorded. The differences in different gender, age and visual acuity groups were analyzed respectively. Of 30 subjects were enrolled to testify the interobserver reliability. Another 46 subjects（including 26 normal subjects and 20 patients） were taken the test and theirs deviations were recorded to testify the validity of the reference value.RESULTS： The max horizontal and vertical deviations were 2.55° and 0.76° with normal corrected visual acuity while 3.88° and 1.46° for subjects with poor corrected vision. The differences between age groups was insignificant（Z =3.615, 4.758; P =0.461, 0.313 for horizontal and vertical respectively）. The max horizontal deviation of female was smaller than male（Z =-2.177; P =0.029）,but the difference in max vertical deviation was insignificant（Z =-1.296; P =0.195）. The mean difference between observers were both-0.1°, with 95% confidence limits（CI） of-1.4° and 1.6° in max horizontal deviations while-2.1° and 1.8° in max vertical deviation. The mean deviation of 26 normal subjects was 1.02° ±0.84° for horizontal and 0.47° ±0.30° for vertical which both within the range of reference values. The mean deviation of 20 patients was 13.51°±11.69° for horizontal and 8.34°±8.58°for vertical which both beyond the reference range.CONCLUSION： The max amplitude of horizontal and vertical deviation is pointed as the numerical parameters of computerized diplopia test. The reference values are different between normal corrected visual acuity and poor corrected vision. These values may useful for evaluating patients with diplopia in veriety conditions during clinical practice.

Peripancreatic collections in acute pancreatitis: Correlation between computerized tomography and operative fi ndings

AIM: To evaluate the ability of contrast-enhanced computerized tomography (CECT) to characterize the nature of peripancreatic collections.METHODS: Twenty five patients with peripancreatic collections on CECT and who underwent operative intervention for severe acute pancreatitis were retrospectively studied. The collections were classified into (1) necrosis without frank pus; (2) necrosis with pus; and (3) fluid without necrosis. A blinded radiologist assessed the preoperative CTs of each patient for necrosis and peripancreatic fluid collections. Peripancreatic collections were described in terms of volume, location, number, heterogeneity, fluid attenuation, wall perceptibility, wall enhancement, presence of extraluminal gas, and vascular compromise.RESULTS: Fifty-four collections were identif ied at operation, of which 45 (83%) were identif ied on CECT. Of these, 25/26 (96%) had necrosis without pus, 16/19 (84%) had necrosis with pus, and 4/9 (44%) had fluid without necrosis. Among the study characteristics, fluid heterogeneity was seen in a greater proportion of collections in the group with necrosis and pus, compared to the other two groups (94% vs 48% and 25%, P = 0.002 and 0.003, respectively). Among the wall characteristics, irregularity was seen in a greater proportion of collections in the groups with necrosis with and without pus, when compared to the group with fluid without necrosis (88% and 71% vs 25%, P = 0.06 and P < 0.01, respectively). The combination of heterogeneity and presence of extraluminal gas had a specif icity and positive likelihood ratio of 92% and 5.9, respectively, in detecting pus. CONCLUSION: Most of the peripancreatic collections seen on CECT in patients with severe acute pancreatitis who require operative intervention contain necrotic tissue. CECT has a somewhat limited role in differentiating the different types of collections.

Positron emission tomography/computerized tomography in the evaluation of primary non-Hodgkin's lymphoma of prostate

Primary malignant lymphoma of the prostate is exceedingly rare.Here we report a case of a 65-year-old man who presented with increased urinary frequency,urinary urgency,and urinary incontinence for two years.Benign prostatic hypertrophy was suspected at primary impression.Ultrasound revealed a hypoechoic lesion of the prostate.The total serum prostate-specific antigen was within normal range.Positron emission tomography/computerized tomography(PET/CT)showed a hypermetabolic prostatic lesion.Prostate biopsy was consistent with a non-germinal center diffuse large B cell lymphoma.There was complete remission of the prostatic lesion following six cycles of chemotherapy as shown on the second PET/CT imaging.18F-fluoro-deoxy glucose PET/CT is not only a complement to conventional imaging,but also plays a significant role in the diagnosis and evaluation of treatment response of prostatic lymphoma.

Application of Proton Magnetic Resonance Spectroscopy and Computerized Tomography in the Diagnosis and Treatment of Nonalcoholic Fatty Liver Disease

In order to investigate the application of proton magnetic resonance spectroscopy （ill-MRS） and computerized tomography （CT） in the quantitative diagnosis of nonalcoholic fatty liver disease （NAFLD） and evaluation of therapeutic effects, 22 patients with NAFLD were selected according to the Chinese Medical Association＇s （CMA） standard of the NAFLD in comparison with 20 healthy volunteers （as control group）. Blood samples for biochemistry were collected. The severity of hepatosteatosis was evaluated by ^1H-MRS scan and CT scan of liver. The intrahepatic content of lipid （IHCL） and CT value ratio of liver to spleen were calculated. The patients in NAFLD group were treated with Ganzhixiao Capsule for 8 weeks. The changes in IHCL and CT value ratio of liver to spleen were observed before and after treatment. In NAFLD group serum ALT, TG, IHCL calculated by ^1HMRS were increased and CT value ratio of liver to spleen decreased significantly as compared with control group. After treatment for 8 weeks serum ALT, TG, IHCL were decreased significantly, while CT value ratio of liver to spleen increased significantly in NAFLD group. It was suggested that IHCL could be measured precisely by ^1HMRS. NAFLD was treated effectively by Ganzhixiao capsule.

COMPUTERIZED SIMULATION OF MOLTEN SALT SOLUTION OF Li,KF,Cl SYSTEM BY MOLECULAR DYNAMIC METHOD

The structure and properties of molten salt solution o J Li,K|F,Cl system have been investiged by computerized simulation of molecular dynamic method.The partial RDF,the partial molar energy of mixing and the diffusion coeffients of Li^+,K^+,F^- and Cl^- have been calculated. The results are in agreement with the experimental values.The regularities of the distribution of ions and mieroscopic holes are discussed based on the results of computerized simulation.

The Clinical Application of Computerized Three-Dimensional Mimic Operation for Maxillofacial Bone Tumor

Facial bone, as the frame to support maxillofacial region and with several sinuses and cavities, is structurally complicated and the maxillofacial tumors,benign or malignant, in this region usually grows into the deep tissues, sinus-cav-ities and orbit and destroys the bone. In this study, the maxillofacial tumors were subjected to a mimic operation on a computer following CT scanning and 3-dimen-sional reconstruction. The data similar to those of real operation were obtained,which could be used for developing operative plans. As compared with data on the basis of conditions in the real operation, computerized mimic operation reflected the real conditions during operation. Computerized mimic operation is valuable for the preoperative planning and the prediction of probable intraoperative events.

Applied Strain Field on Microstructure Optimization of Ti-Al-Nb Alloy Computer Simulated by Phase Field Approach

The effects of applied tensile strain on the coherent α_2→O-phase transformation in Ti-Al-Nb alloys are explored bycomputer simulation using a phase-field method. The focus is on the influence of the applied strain direction onthe microstructure and volume fraction of the O-phase precipitates. It is found that altering applied strain directioncan modify microstructure of Ti-25Al-10～12Nb (at. pct) alloy during α_2→O-phase transformation effectively andfull laminate microstructure in the Ti-25Al-10Nb (at. pct) alloy can be realized by an applied strain only along thedirection 30°away from the α_2 phase <1010> in magnitude equivalent to the stress-free transformation strain. Thesimulation also shows that not only the magnitude of applied strain but also the applied strain direction influencesthe O-phase volume fraction and the effect of strain direction on the volume fraction is up to 25%.

Effects of Irregular Respiratory Motion on the Positioning Accuracy of Moving Target with Free Breathing Cone-Beam Computerized Tomography

For positioning a moving target, a maximum intensity projection (MIP) or average intensity projection (AIP) image derived from 4DCT is often used as the reference image which is matched to free breathing cone-beam CT (FBCBCT) before treatment. This method can be highly accurate if the respiratory motion of the patient is stable. However, a patient’s breathing pattern is often irregular. The purpose of this study is to investigate the effects of irregular respiration on positioning accuracy for a moving target aligned with FBCBCT. Nine patients’ respiratory motion curves were selected to drive a Quasar motion phantom with one embedded cubic and two spherical targets. A 4DCT of the phantom was acquired on a CT scanner (Philips Brilliance 16) equipped with a Varian RPM system. The phase binned 4DCT images and the corresponding MIP and AIP images were transferred into Eclipse for analysis. FBCBCTs of the phantom driven by the same respiratory curves were also acquired on a Varian TrueBeam and fused such that both CBCT and MIP/AIP images share the same target zero positions. The sphere and cube volumes and centroid differences (alignment error) determined by MIP, AIP and FBCBCT images were calculated, respectively. Compared to the volume determined by MIP, the volumes of the cube, large sphere, and small sphere in AIP and FBCBCT images were smaller. The alignment errors for the cube, large sphere and small sphere with center to center matches between MIP and FBCBCT were 2.5 ± 1.8 mm, 2.4 ± 2.1 mm, and 3.8 ± 2.8 mm, and the alignment errors between AIP and FBCBCT were 0.5 ± 1.1 mm, 0.3 ± 0.8 mm, and 1.8 ± 2.0 mm, respectively. AIP images appear to be superior reference images to MIP images. However, irregular respiratory pattern could compromise the positioning accuracy, especially for smaller targets.

AN ANALYSIS OF ACOUSTIC CHARACTERISTICS OFCLEFT PALATE SPEECH WITH COMPUTERIZED SPEECH SIGNAL PROCESSING SYSTEM

The acoustic characteristics or the chinese vowels of 24 children with cleft palate and 10 normal control children were analyzed by computerized speech signal processing system (CSSPS),and the speech articulation was judged with Glossary of clert palate speech(GCPS).The listening judgement showed that the speech articulation was significantly different between the two groups(P<0.01).The objective quantitative measurement suggested that the formant pattern(FP)of vowels in children with cleft palate was different from that of normal control children except vowel[a](P< 0.05).The acoustic vowelgraph or the Chinese vowels which demonstrated directly the relationship of vocal space and speech perception was stated with the first formant frequence(F1)and the second formant frequence(F2).The authors conclude that the values or F1 and F2 point out the upward and backward tongue movement to close the clert, which reflects the vocal characteristics of trausmission of clert palate speech.

Changes in reaction time, coefficient of variance of reaction time, and autonomic nerve function in the mental fatigue state caused by long-term computerized Kraepelin test workload in healthy volunteers

Fatigue is a common sense caused by crushing labor, stressful social events and various illnesses. It is usually judged by their subjective symptoms, but it should be evaluated in an objective perspective. Here we show that the decrease of working efficiency and sympathetic hyperactivity are associated with mental fatigue state caused by prolonged mental workload. Recently we made a new mental fatigue model of healthy volunteers caused by long-term computerized Kraepelin test (CKT) workload. CKT is our new software for automatically checking the calculation capability, with which it is easy to determine the reaction time (RT), coefficient of variance of reaction time (CV), and accuracy of the answers (AC) during tasks. We put 24 healthy volunteers into the fatigue state by subjecting them to 120 minutes’ CKT workload, and then studied the changes in fatigue sensation, RT, CV, and AC before and after the CKT workload. The fatigue sensation, RT, and CV were clearly increased by the fatigue-inducing task and recovered during the resting period. We also studied the changes in autonomic nerve activity by using heart rate variability analysis. The low/high frequency component ratio (LF/HF) was signifi-cantly increased by the fatigue-inducing task and decreased by resting, suggesting that mental stress causes a relatively sympathetic nerve activity-dominant state. Therefore, our new fatigue model involving a long-term CKT workload is a good mental fatigue model to provide much information about the fatigue state simultane-ously, and the increase of RT, CV, and proportion of sympathetic activity (LF/HF) are associated with mental fatigue state. These might be useful objective biomarkers or evaluating a mental fatigue state.

The Differences of Interstitial Lung Diseases in High-Resolution Computerized Tomography and Pulmonary Function Test among Different Connective Tissue Diseases, and the Correlated Factors

Objective. To study the difference of interstitial lung diseases (ILDs) in high-resolution computerized tomography and pulmonary function test among different connective tissue diseases (CTDs). Methods. 209 patients with different CTDs were recruited and underwent lung HRCT and PFT. Eerythrocyte sedimentation rate (ESR), C-reactive protein (CRP), serum ferritin (SF), anti-SSA, and so on were tested. Based on HRCT, a patient was classified into ILD group (CTD+ILD) or non-ILD group (CTD-ILD). HRCT, PFT, and laboratory markers were compared according to CTDs and CTD-associated ILDs. Results. The incidences of ILD were 79.6%, 82.0%, 89.7%, and 97.1% respectively for Rheumatoid arthritis (RA), primary Sjogren’s symptom (pSS), dermatomyositis/polymyositis (DM/PM), and systemic sclerosis (SSc) groups. RA and pSS patients exhibited more nodules, patching, ground-glass opacity, and cord shadow foci in HRCT, DM/PM and SSc patients exhibited more reticular opacity and honeycombing foci. RA and pSS patients exhibited more obstructive ventilatory disorder, small airway dysfunction and emphysema in PFT, and DM/PM and SSc patients exhibited more restrictive ventilatory disorder, mixed ventilatory disorder. ESR, CRP and SF were significantly higher in total CTD+ILD group than in total CTD-ILD group (P = 0.047, 0.006, 0.004, respectively), and higher in different CTD+ ILD groups than in comparable CTD-ILD groups (P = 0.049, 0.048, and 0.023, pSS+ILD, SSc+ILD and RA+ILD compared to pSS-ILD, SSc-ILD and RA-ILD, respectively for ESR, CRP, SF). The positive rate of anti-SSA was significantly higher in DM/PM+ILD group than in DM/PM-ILD group (P = 0.025). Conclusions. The manifestations and incidences of ILDs differ among different CTDs in HRCT and PFT, and inflammation and anti-SSA are positively correlated with ILDs in different CTDs, which provide important evidences for judging disease condition and prognosis.

Computer-Aided Solution to the Vibrational Effect of Instabilities in Gas Turbine Compressors

Surge and stall are the two main types of instabilities that often occur on the compressor system of gas turbines. The effect of this instability often leads to excessive vibration due to the back pressure imposed to the system by this phenomenon. In this work, fouling was observed as the major cause of the compressor instability. A step to analyze how this phenomenon can be controlled with the continuous examination of the vibration amplitude using a computer approach led to the execution of this work. The forces resulting to vibration in the system is usually external to it. This external force is aerodynamic and the effect was modeled using force damped vibration analysis. A gas turbine plant on industrial duty for electricity generation was used to actualize this research. The data for amplitude of vibration varied between -15 and 15 mm/s while the given mass flow rate and pressure ratio were determined as falling between 6.1 to 6.8 kg/s and 9.3 to 9.6 respectively. A computer program named VICOMS written in C++ programming language was developed. The results show that the machine should not be run beyond 14.0 mm vibration amplitude in order to avoid surge, stall and other flow-induced catastrophic breakdown.

Geometric Computing Based on Computerized Descriptive Geometric

Computer-aided Design （CAD）, video games and other computer graphic related technology evolves substantial processing to geometric elements. A novel geometric computing method is proposed with the integration of descriptive geometry, math and computer algorithm. Firstly, geometric elements in general position are transformed to a special position in new coordinate system. Then a 3D problem is projected to new coordinate planes. Finally, according to 2D/3D correspondence principle in descriptive geometry, the solution is constructed computerized drawing process with ruler and compasses. In order to make this method a regular operation, a two-level pattern is established. Basic Layer is a set algebraic packaged function including about ten Primary Geometric Functions （PGF） and one projection transformation. In Application Layer, a proper coordinate is established and a sequence of PGFs is sought for to get the final results. Examples illustrate the advantages of our method on dimension reduction, regulatory and visual computing and robustness.

Designing of A Computerized Cognitive Adaptive Testing Model

Therecouldbenoscienceasweknowitwithoutmeasurement.Testing,includingallformsoflanguagetestingandpsychometricsitself,isoneformofmeasurement.Alanguagetestmaybedefinedasaprocedureforelicitinglanguageperformanceandaprocedureforassessingthatperformance.How...