To reduce the computing time of composite computer-generated holograms （CGHs） gen- eration based upon the angular projection algorithm for holographic three-dimensional （3D） display, a grid-based holographic displ...To reduce the computing time of composite computer-generated holograms （CGHs） gen- eration based upon the angular projection algorithm for holographic three-dimensional （3D） display, a grid-based holographic display （ GHD ） scheme was designed. The grid computing technology was applied to numerically process the different angular projections of an object in distributed-parallel manner to create the corresponding CGHs. The whole treatment of a projection was regarded as a job executed on the grid node machine. The number of jobs which were submitted to grid nodes, therefore, was equal to that of the projections of the object. A Condor-based grid testbed was constructed to verify the feasibility of the GHD scheme, and a graphical user interface （GUI） program and several service modules were developed for it. A 3D terrain model as an example was processed on the testbed. The result showed that the scheme was feasible and able to improve the execution elficiency greatly.展开更多
面向机载探测系统大视场光学成像的需求,开展了大视场光学成像系统光学设计、自由曲面光学元件超精密加工、形位误差同步检测以及系统集成与成像实验研究。首先,采用视场扩展法进行大视场自由曲面离轴反射光学系统的设计;其次,进行铝合...面向机载探测系统大视场光学成像的需求,开展了大视场光学成像系统光学设计、自由曲面光学元件超精密加工、形位误差同步检测以及系统集成与成像实验研究。首先,采用视场扩展法进行大视场自由曲面离轴反射光学系统的设计;其次,进行铝合金自由曲面反射镜纳米精度加工和高频抑制工艺探索,并实现了基于计算全息元件的自由曲面形位高精度检测;最后,进行了光学系统的装调集成与成像实验。结果表明,系统的视场角为30°×5°,全视场光学传递函数值大于0.7,接近衍射极限,最大像元均方根半径为2.075μm,自由曲面光学元件的面形精度均方根(Root Mean Square,RMS)值优于20 nm,位置精度优于1μm,装配集成后能够满足大视场高分辨的场景使用要求,同时具备稳定可靠和快响制造等特点。展开更多
Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is u...Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is used to model ideal aspheric wavefront. Reflective Fresnel zones located in a ring area concentric to the CGH structure is designed to reduce or eliminate alignment errors. Substrate figure error, pattern distortion, etching and duty cycle variations that influence the reconstructed wavefront are quantitatively analyzed in theory and corresponding error equations are obtained to guide the tolerance distribution during CGH fabricating. A design example is given and the uncertainty of t achieves λ20.展开更多
Freeform surfaces are increasingly used in the design of compact optical systems. Interferometric null test with computer generated hologram （CGH）, which has been successfully used in highly accurate test of aspheri...Freeform surfaces are increasingly used in the design of compact optical systems. Interferometric null test with computer generated hologram （CGH）, which has been successfully used in highly accurate test of aspheric surfaces, is adopted to test the freeform surfaces. The best fitting sphere of the freeform surface under the test is firstly calculated to quickly estimate the possibility of null test. To decrease the maximum spatial frequency of the null CGH, the position of the CGH and the direction of optical axis are optimized. The estimated maximum spatial frequency of the CGH is 7.8% apart from the optimized one, which shows the validity of the best fitting sphere.展开更多
Interferometric optical testing using computer-generated hologram （CGH） can give highly accurate measurement of aspheric surfaces has been proved. After the system is designed, a phase function is obtained according...Interferometric optical testing using computer-generated hologram （CGH） can give highly accurate measurement of aspheric surfaces has been proved. After the system is designed, a phase function is obtained according to the CGH＇s surface plane. For the requirement of accuracy, an optimization algorithm that transfers the phase function into a certain mask pattern file is presented in this letter, based on the relationship between the pattern error of CGH and the output wavefront accuracy. Then the writing machine is able to fabricate such a mask with this kind of file. With that mask, an improved procedure on fabrication of phase type CGH is also presented. Interferometrie test results of an aspherie surface show that the whole test system obtains the demanded accuracy.展开更多
A three-dimensional （3D） object reconstruction technique that uses pure-phase computer-generated holograms （CGHs） and a phase-only spatial light modulator （SLM） is proposed. The full parallax CGHs are generated ...A three-dimensional （3D） object reconstruction technique that uses pure-phase computer-generated holograms （CGHs） and a phase-only spatial light modulator （SLM） is proposed. The full parallax CGHs are generated by the point source method and the wave-oriented method without paraxial approximation. Different from conventional CGHs, the pure-phase information on the hologram plane is loaded on the SLM to reconstruct the 3D diffusive objects without considering the reference wave. This technique is more efficient in its utilization of the space-bandwidth product of the SLMs. Numerical simulations and experiments are performed, and the results show that our proposed method can reconstruct 3D diffusive objects successfully.展开更多
We investigate the computer-generated hologram with full parallax and which can be reconstructed with white light. The object of the hologram is processed from three-dimensional computer graphics polygon data and has ...We investigate the computer-generated hologram with full parallax and which can be reconstructed with white light. The object of the hologram is processed from three-dimensional computer graphics polygon data and has shaded surface for hidden surface removal. The optically reconstructed image from the printed hologram is evaluated.展开更多
We propose a method for color electroholography using a simple red-green-blue （RGB） gradation representa- tion method without controlling the respective brightness of tile reference RGB-colored lights. The proposed ...We propose a method for color electroholography using a simple red-green-blue （RGB） gradation representa- tion method without controlling the respective brightness of tile reference RGB-colored lights. The proposed method uses RGB multiple bit planes comprising RGB binary-weighted computer-generated holograms with various light transmittanees. The object points of a given three-dimensional （3D） object are assigned to RGB nmltiple bit planes according to their RGB gradation levels. The RGB multiple bit planes are sequentially displayed in a tim-division-multiplexe- manner. Consequently, the proposed method yields a color gradation representation of a reconstructed 3D object.展开更多
Full-parallax light-field is captured by a small-scale 3D image scanning system and applied to holographic display. A vertical camera array is scanned horizontally to capture full-parallax imagery, and the vertical vi...Full-parallax light-field is captured by a small-scale 3D image scanning system and applied to holographic display. A vertical camera array is scanned horizontally to capture full-parallax imagery, and the vertical views between cameras are interpolated by depth image-based rendering technique. An improved technique for depth estimation reduces the estimation error and high-density light-field is obtained. The captured data is employed for the calculation of computer hologram using ray-sampling plane. This technique enables high-resolution display even in deep 3D scene although a hologram is calculated from ray information, and thus it makes use of the important advantage of holographic 3D display.展开更多
文摘To reduce the computing time of composite computer-generated holograms （CGHs） gen- eration based upon the angular projection algorithm for holographic three-dimensional （3D） display, a grid-based holographic display （ GHD ） scheme was designed. The grid computing technology was applied to numerically process the different angular projections of an object in distributed-parallel manner to create the corresponding CGHs. The whole treatment of a projection was regarded as a job executed on the grid node machine. The number of jobs which were submitted to grid nodes, therefore, was equal to that of the projections of the object. A Condor-based grid testbed was constructed to verify the feasibility of the GHD scheme, and a graphical user interface （GUI） program and several service modules were developed for it. A 3D terrain model as an example was processed on the testbed. The result showed that the scheme was feasible and able to improve the execution elficiency greatly.
文摘面向机载探测系统大视场光学成像的需求,开展了大视场光学成像系统光学设计、自由曲面光学元件超精密加工、形位误差同步检测以及系统集成与成像实验研究。首先,采用视场扩展法进行大视场自由曲面离轴反射光学系统的设计;其次,进行铝合金自由曲面反射镜纳米精度加工和高频抑制工艺探索,并实现了基于计算全息元件的自由曲面形位高精度检测;最后,进行了光学系统的装调集成与成像实验。结果表明,系统的视场角为30°×5°,全视场光学传递函数值大于0.7,接近衍射极限,最大像元均方根半径为2.075μm,自由曲面光学元件的面形精度均方根(Root Mean Square,RMS)值优于20 nm,位置精度优于1μm,装配集成后能够满足大视场高分辨的场景使用要求,同时具备稳定可靠和快响制造等特点。
基金the Ministerial Level Foundation (4645103030401)
文摘Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is used to model ideal aspheric wavefront. Reflective Fresnel zones located in a ring area concentric to the CGH structure is designed to reduce or eliminate alignment errors. Substrate figure error, pattern distortion, etching and duty cycle variations that influence the reconstructed wavefront are quantitatively analyzed in theory and corresponding error equations are obtained to guide the tolerance distribution during CGH fabricating. A design example is given and the uncertainty of t achieves λ20.
文摘Freeform surfaces are increasingly used in the design of compact optical systems. Interferometric null test with computer generated hologram （CGH）, which has been successfully used in highly accurate test of aspheric surfaces, is adopted to test the freeform surfaces. The best fitting sphere of the freeform surface under the test is firstly calculated to quickly estimate the possibility of null test. To decrease the maximum spatial frequency of the null CGH, the position of the CGH and the direction of optical axis are optimized. The estimated maximum spatial frequency of the CGH is 7.8% apart from the optimized one, which shows the validity of the best fitting sphere.
文摘Interferometric optical testing using computer-generated hologram （CGH） can give highly accurate measurement of aspheric surfaces has been proved. After the system is designed, a phase function is obtained according to the CGH＇s surface plane. For the requirement of accuracy, an optimization algorithm that transfers the phase function into a certain mask pattern file is presented in this letter, based on the relationship between the pattern error of CGH and the output wavefront accuracy. Then the writing machine is able to fabricate such a mask with this kind of file. With that mask, an improved procedure on fabrication of phase type CGH is also presented. Interferometrie test results of an aspherie surface show that the whole test system obtains the demanded accuracy.
基金supported by the Innovation Team Development Program of the Ministry of Education of China (No IRT0606)the National Basic Research Program of China (No 2006CB302901)
文摘A three-dimensional （3D） object reconstruction technique that uses pure-phase computer-generated holograms （CGHs） and a phase-only spatial light modulator （SLM） is proposed. The full parallax CGHs are generated by the point source method and the wave-oriented method without paraxial approximation. Different from conventional CGHs, the pure-phase information on the hologram plane is loaded on the SLM to reconstruct the 3D diffusive objects without considering the reference wave. This technique is more efficient in its utilization of the space-bandwidth product of the SLMs. Numerical simulations and experiments are performed, and the results show that our proposed method can reconstruct 3D diffusive objects successfully.
基金supported by the Futaba Electronics Memorial Foundation
文摘We investigate the computer-generated hologram with full parallax and which can be reconstructed with white light. The object of the hologram is processed from three-dimensional computer graphics polygon data and has shaded surface for hidden surface removal. The optically reconstructed image from the printed hologram is evaluated.
基金supported by the Japan Society for the Promotion of Science through a Grant-in-Aid for Scientific Research(C)(No.15K00153)
文摘We propose a method for color electroholography using a simple red-green-blue （RGB） gradation representa- tion method without controlling the respective brightness of tile reference RGB-colored lights. The proposed method uses RGB multiple bit planes comprising RGB binary-weighted computer-generated holograms with various light transmittanees. The object points of a given three-dimensional （3D） object are assigned to RGB nmltiple bit planes according to their RGB gradation levels. The RGB multiple bit planes are sequentially displayed in a tim-division-multiplexe- manner. Consequently, the proposed method yields a color gradation representation of a reconstructed 3D object.
基金partly supported by the JSPS Grant-in-Aid for Scientific Research #17300032
文摘Full-parallax light-field is captured by a small-scale 3D image scanning system and applied to holographic display. A vertical camera array is scanned horizontally to capture full-parallax imagery, and the vertical views between cameras are interpolated by depth image-based rendering technique. An improved technique for depth estimation reduces the estimation error and high-density light-field is obtained. The captured data is employed for the calculation of computer hologram using ray-sampling plane. This technique enables high-resolution display even in deep 3D scene although a hologram is calculated from ray information, and thus it makes use of the important advantage of holographic 3D display.
