Research on the Computer Network Protocol Test Model based on Genetic and Random Walk Algorithm

In this paper, we conduct research on the computer network protocol test model based on genetic and random walk algorithm.Network protocol is the abstract concept, is important in the process of the development of network system. Fully understand and grasp of thenetwork protocols for managers is there is a big diffi cult. Network covert channel is the evaluation of intrusion detection system and fi rewallsecurity performance of an important means, the paper will start from the angle of the attacker, the fl aws of the research, and use this kind ofdefect to realize network covert channel, the random walk algorithm will be feasible for dealing with this issue. For achieving this, we integratethe genetic and random walk algorithm for systematic optimization.

Quantum key distribution series network protocol with M-classical Bobs

Secure key distribution among classical parties is impossible both between two parties and in a network. In this paper, we present a quantum key distribution （QKD） protocol to distribute secure key bits among one quantum party and numerous classical parties who have no quantum capacity. We prove that our protocol is completely robust, i.e., any eavesdropping attack should be detected with nonzero probability. Our calculations show that our protocol may be secure against Eve＇s symmetrically individual attack.

Identifying and Verifying Vulnerabilities through PLC Network Protocol and Memory Structure Analysis

Cyberattacks on the Industrial Control System(ICS)have recently been increasing,made more intelligent by advancing technologies.As such,cybersecurity for such systems is attracting attention.As a core element of control devices,the Programmable Logic Controller(PLC)in an ICS carries out on-site control over the ICS.A cyberattack on the PLC will cause damages on the overall ICS,with Stuxnet and Duqu as the most representative cases.Thus,cybersecurity for PLCs is considered essential,and many researchers carry out a variety of analyses on the vulnerabilities of PLCs as part of preemptive efforts against attacks.In this study,a vulnerability analysis was conducted on the XGB PLC.Security vulnerabilities were identified by analyzing the network protocols and memory structure of PLCs and were utilized to launch replay attack,memory modulation attack,and FTP/Web service account theft for the verification of the results.Based on the results,the attacks were proven to be able to cause the PLC to malfunction and disable it,and the identified vulnerabilities were defined.

Network Protocol Recognition Based on Convolutional Neural Network

How to correctly acquire the appropriate features is a primary problem in network protocol recognition field.Aiming to avoid the trouble of artificially extracting features in traditional methods and improve recognition accuracy,a network protocol recognition method based on Convolutional Neural Network(CNN)is proposed.The method utilizes deep learning technique,and it processes network flows automatically.Firstly,normalization is performed on the intercepted network flows and they are mapped into two-dimensional matrix which will be used as the input of CNN.Then,an improved classification model named Ptr CNN is built,which can automatically extract the appropriate features of network protocols.Finally,the classification model is trained to recognize the network protocols.The proposed approach is compared with several machine learning methods.Experimental results show that the tailored CNN can not only improve protocol recognition accuracy but also ensure the fast convergence of classification model and reduce the classification time.

EECLP: AWireless Sensor Networks Energy Efficient Cross-Layer Protocol

Recent advancements in wireless communications have allowed the birth of novel wireless sensor networks(WSN).A sensor network comprises several micro-sensors deployed randomly in an area of interest.A micro-sensor is provided with an energy resource to supply electricity to all of its components.However,the disposed energy resource is limited and battery replacement is generally infeasible.With this restriction,the sensors must conserve energy to prolong their lifetime.Various energy conservation strategies for WSNs have been presented in the literature,from the application to the physical layer.Most of these solutions focus only on optimizing a single layer in terms of energy consumption.In this research,a novel cross-layer technique for WSNs’effective energy usage is presented.Because most energy consumption factors exist in the Medium Access Control(MAC)layer and network layer,our EECLP protocol(Energy Efficient Cross-Layer Protocol for Wireless Sensor Networks)integrates these two layers to satisfy energy efficiency criteria.To gain access to the transmission channel,we implement a communication regime at the MAC layer based on CSMA/CA(Carrier Sense Multiple Access/Collision Avoidance)techniques.Next,depending on the activity and a standby period,we employ the RTS/CTS(Request to Send/Clear to Send)method to prevent collisions and resolve hidden node concerns by utilizing the network allocation vector(NAV)to calculate the transmission duration.Employing a greedy strategy,we establish chains amongst cluster members to mitigate the issue of high energy consumption in routing data.An objective function was utilized to determine the optimal cross-chain path based on the distances to the base station(BS)and residual energy(RE).The simulation,testing,and comparison of the proposed protocol to peer protocols have shown superior outcomes and a prolonged network lifespan.Using the suggested protocol,the network lifetime increases by 10%compared to FAMACO(Fuzzy and Ant Colony Optimization based MAC/Routing Cross-layer)protocol,and it increases by 90%and 95%compared to IFUC(Improved Fuzzy Unequal Clustering)and UHEED(Unequal Hybrid Energy Efficient and Distributed)protocols successively.

Falcon Optimization Algorithm-Based Energy Efficient Communication Protocol for Cluster-Based Vehicular Networks

Rapid development in Information Technology(IT)has allowed several novel application regions like large outdoor vehicular networks for Vehicle-to-Vehicle(V2V)transmission.Vehicular networks give a safe and more effective driving experience by presenting time-sensitive and location-aware data.The communication occurs directly between V2V and Base Station(BS)units such as the Road Side Unit(RSU),named as a Vehicle to Infrastructure(V2I).However,the frequent topology alterations in VANETs generate several problems with data transmission as the vehicle velocity differs with time.Therefore,the scheme of an effectual routing protocol for reliable and stable communications is significant.Current research demonstrates that clustering is an intelligent method for effectual routing in a mobile environment.Therefore,this article presents a Falcon Optimization Algorithm-based Energy Efficient Communication Protocol for Cluster-based Routing(FOA-EECPCR)technique in VANETS.The FOA-EECPCR technique intends to group the vehicles and determine the shortest route in the VANET.To accomplish this,the FOA-EECPCR technique initially clusters the vehicles using FOA with fitness functions comprising energy,distance,and trust level.For the routing process,the Sparrow Search Algorithm(SSA)is derived with a fitness function that encompasses two variables,namely,energy and distance.A series of experiments have been conducted to exhibit the enhanced performance of the FOA-EECPCR method.The experimental outcomes demonstrate the enhanced performance of the FOA-EECPCR approach over other current methods.

Multi-scale physics-informed neural networks for solving high Reynolds number boundary layer flows based on matched asymptotic expansions

Multi-scale system remains a classical scientific problem in fluid dynamics,biology,etc.In the present study,a scheme of multi-scale Physics-informed neural networks is proposed to solve the boundary layer flow at high Reynolds numbers without any data.The flow is divided into several regions with different scales based on Prandtl's boundary theory.Different regions are solved with governing equations in different scales.The method of matched asymptotic expansions is used to make the flow field continuously.A flow on a semi infinite flat plate at a high Reynolds number is considered a multi-scale problem because the boundary layer scale is much smaller than the outer flow scale.The results are compared with the reference numerical solutions,which show that the msPINNs can solve the multi-scale problem of the boundary layer in high Reynolds number flows.This scheme can be developed for more multi-scale problems in the future.

Dynamic Routing Protocol for Computer Networkswith Clustering Topology

This paper presents a hierarchical dynamic routing protocol (HDRP) based on the discrete dynamic programming principle. The proposed protocol can adapt to the dynamic and large computer networks (DLCN) with clustering topology. The procedures for realizing routing update and decision are presented in this paper. The proof of correctness and complexity analysis of the protocol are also made. The performance measures of the HDRP including throughput and average message delay are evaluated by using of simulation. The study shows that the HDRP provides a new available approach to the routing decision for DLCN or high speed networks with clustering topology.

A Priority-aware Frequency Domain Polling MAC Protocol for OFDMA-based Networks in Cyber-physical Systems

Wireless networking in cyber-physical systems (CPSs) is characteristically different from traditional wireless systems due to the harsh radio frequency environment and applications that impose high real-time and reliability constraints. One of the fundamental considerations for enabling CPS networks is the medium access control protocol. To this end, this paper proposes a novel priority-aware frequency domain polling medium access control (MAC) protocol, which takes advantage of an orthogonal frequency-division multiple access (OFDMA) physical layer to achieve instantaneous priority-aware polling. Based on the polling result, the proposed work then optimizes the resource allocation of the OFDMA network to further improve the data reliability. Due to the non-polynomial-complete nature of the OFDMA resource allocation, we propose two heuristic rules, based on which an efficient solution algorithm to the OFDMA resource allocation problem is designed. Simulation results show that the reliability performance of CPS networks is significantly improved because of this work. © 2014 Chinese Association of Automation.

A Multi-Token Sector Antenna Neighbor Discovery Protocol for Directional Ad Hoc Networks

In this paper,we propose a Multi-token Sector Antenna Neighbor Discovery(M-SAND)protocol to enhance the efficiency of neighbor discovery in asynchronous directional ad hoc networks.The central concept of our work involves maintaining multiple tokens across the network.To prevent mutual interference among multi-token holders,we introduce the time and space non-interference theorems.Furthermore,we propose a master-slave strategy between tokens.When the master token holder(MTH)performs the neighbor discovery,it decides which 1-hop neighbor is the next MTH and which 2-hop neighbors can be the new slave token holders(STHs).Using this approach,the MTH and multiple STHs can simultaneously discover their neighbors without causing interference with each other.Building on this foundation,we provide a comprehensive procedure for the M-SAND protocol.We also conduct theoretical analyses on the maximum number of STHs and the lower bound of multi-token generation probability.Finally,simulation results demonstrate the time efficiency of the M-SAND protocol.When compared to the QSAND protocol,which uses only one token,the total neighbor discovery time is reduced by 28% when 6beams and 112 nodes are employed.

A CSMA/CA based MAC protocol for hybrid Power-line/Visible-light communication networks:Design and analysis

Hybrid Power-line/Visible-light Communication(HPVC)network has been one of the most promising Cooperative Communication(CC)technologies for constructing Smart Home due to its superior communication reliability and hardware efficiency.Current research on HPVC networks focuses on the performance analysis and optimization of the Physical(PHY)layer,where the Power Line Communication(PLC)component only serves as the backbone to provide power to light Emitting Diode(LED)devices.So designing a Media Access Control(MAC)protocol remains a great challenge because it allows both PLC and Visible Light Communication(VLC)components to operate data transmission,i.e.,to achieve a true HPVC network CC.To solve this problem,we propose a new HPC network MAC protocol(HPVC MAC)based on Carrier Sense Multiple Access/Collision Avoidance(CSMA/CA)by combining IEEE 802.15.7 and IEEE 1901 standards.Firstly,we add an Additional Assistance(AA)layer to provide the channel selection strategies for sensor stations,so that they can complete data transmission on the selected channel via the specified CSMA/CA mechanism,respectively.Based on this,we give a detailed working principle of the HPVC MAC,followed by the construction of a joint analytical model for mathematicalmathematical validation of the HPVC MAC.In the modeling process,the impacts of PHY layer settings(including channel fading types and additive noise feature),CSMA/CA mechanisms of 802.15.7 and 1901,and practical configurations(such as traffic rate,transit buffer size)are comprehensively taken into consideration.Moreover,we prove the proposed analytical model has the solvability.Finally,through extensive simulations,we characterize the HPVC MAC performance under different system parameters and verify the correctness of the corresponding analytical model with an average error rate of 4.62%between the simulation and analytical results.

Priority Based Energy Efficient MAC Protocol by Varying Data Ratefor Wireless Body Area Network

Wireless Body Area Network(WBAN)is a cutting-edge technology that is being used in healthcare applications to monitor critical events in the human body.WBAN is a collection of in-body and on-body sensors that monitor human physical parameters such as temperature,blood pressure,pulse rate,oxygen level,body motion,and so on.They sense the data and communicate it to the Body Area Network(BAN)Coordinator.The main challenge for the WBAN is energy consumption.These issues can be addressed by implementing an effective Medium Access Control(MAC)protocol that reduces energy consumption and increases network lifetime.The purpose of the study is to minimize the energy consumption and minimize the delay using IEEE 802.15.4 standard.In our proposed work,if any critical events have occurred the proposed work is to classify and prioritize the data.We gave priority to the highly critical data to get the Guarantee Tine Slots(GTS)in IEEE 802.15.4 standard superframe to achieve greater energy efficiency.The proposed MAC provides higher data rates for critical data based on the history and current condition and also provides the best reliable service to high critical data and critical data by predicting node similarity.As an outcome,we proposed a MAC protocol for Variable Data Rates(MVDR).When compared to existing MAC protocols,the MVDR performed very well with low energy intake,less interruption,and an enhanced packet-sharing ratio.

Neural-Network-Based Control for Discrete-Time Nonlinear Systems with Input Saturation Under Stochastic Communication Protocol

In this paper,an adaptive dynamic programming(ADP)strategy is investigated for discrete-time nonlinear systems with unknown nonlinear dynamics subject to input saturation.To save the communication resources between the controller and the actuators,stochastic communication protocols(SCPs)are adopted to schedule the control signal,and therefore the closed-loop system is essentially a protocol-induced switching system.A neural network(NN)-based identifier with a robust term is exploited for approximating the unknown nonlinear system,and a set of switch-based updating rules with an additional tunable parameter of NN weights are developed with the help of the gradient descent.By virtue of a novel Lyapunov function,a sufficient condition is proposed to achieve the stability of both system identification errors and the update dynamics of NN weights.Then,a value iterative ADP algorithm in an offline way is proposed to solve the optimal control of protocol-induced switching systems with saturation constraints,and the convergence is profoundly discussed in light of mathematical induction.Furthermore,an actor-critic NN scheme is developed to approximate the control law and the proposed performance index function in the framework of ADP,and the stability of the closed-loop system is analyzed in view of the Lyapunov theory.Finally,the numerical simulation results are presented to demonstrate the effectiveness of the proposed control scheme.

Joint channel assignment and cross-layer routing protocol for multi-radio multi-channel Ad Hoc networks

To study multi-radio multi-channel （MR-MC） Ad Hoc networks based on 802.11, an efficient cross-layer routing protocol with the function of joint channel assignment, called joint channel assignment and cross-layer routing （JCACR）, is presented. Firstly, this paper introduces a new concept called channel utilization percentage （CUP）, which is for measuring the contention level of different channels in a node’s neighborhood, and deduces its optimal value for determining whether a channel is overloaded or not. Then, a metric parameter named channel selection metric （CSM） is designed, which actually reffects not only the channel status but also corresponding node’s capacity to seize it. JCACR evaluates channel assignment by CSM, performs a local optimization by assigning each node a channel with the smaller CSM value, and changes the working channel dynamically when the channel is overloaded. Therefore, the network load balancing can be achieved. In addition, simulation shows that, when compared with the protocol of weighted cumulative expected transfer time （WCETT）, the new protocol can improve the network throughput and reduce the end-to-end average delay with fewer overheads.

A Physical Layer Network Coding Based Tag Anti-Collision Algorithm for RFID System

In RFID(Radio Frequency IDentification)system,when multiple tags are in the operating range of one reader and send their information to the reader simultaneously,the signals of these tags are superimposed in the air,which results in a collision and leads to the degrading of tags identifying efficiency.To improve the multiple tags’identifying efficiency due to collision,a physical layer network coding based binary search tree algorithm(PNBA)is proposed in this paper.PNBA pushes the conflicting signal information of multiple tags into a stack,which is discarded by the traditional anti-collision algorithm.In addition,physical layer network coding is exploited by PNBA to obtain unread tag information through the decoding operation of physical layer network coding using the conflicting information in the stack.Therefore,PNBA reduces the number of interactions between reader and tags,and improves the tags identification efficiency.Theoretical analysis and simulation results using MATLAB demonstrate that PNBA reduces the number of readings,and improve RFID identification efficiency.Especially,when the number of tags to be identified is 100,the average needed reading number of PNBA is 83%lower than the basic binary search tree algorithm,43%lower than reverse binary search tree algorithm,and its reading efficiency reaches 0.93.

Self-organization of Reconfigurable Protocol Stack for Networked Control Systems

In networked control systems （NCS）,the control performance depends on not only the control algorithm but also the communication protocol stack.The performance degradation introduced by the heterogeneous and dynamic communication environment has intensified the need for the reconfigurable protocol stack.In this paper,a novel architecture for the reconfigurable protocol stack is proposed,which is a unified specification of the protocol components and service interfaces supporting both static and dynamic reconfiguration for existing industrial communication standards.Within the architecture,a triple-level self-organization structure is designed to manage the dynamic reconfiguration procedure based on information exchanges inside and outside the protocol stack.Especially,the protocol stack can be self-adaptive to various environment and system requirements through the reconfiguration of working mode,routing and scheduling table.Finally,the study on the protocol of dynamic address management is conducted for the system of controller area network （CAN）.The results show the efficiency of our self-organizing architecture for the implementation of a reconfigurable protocol stack.

Dependability in Future Battle Network System —Transport Layer Ability to Maintain Quality of Service

Modernization of armies is a constant process and is driven by intuitive fact that those who do not modernize will become extinct. In last five decades, the development of modern armies has taken place around Colonel John Boyd’s theory of OODA loop that deals with information superiority. Building a robust, mobile and capable network that could provide for novel appliances and information superiority is the main challenge which modernizers are facing. Network, suitable for future combat operations, and able to transport a vast amount of information on a battlefield, is expensive to build. Every mistake in design and the need to correct those mistakes could halt development in an army for years. Therefore, system dependability analysis during system design phase is needed. In this report, the concept of a future Battle Network System is described. The Report evaluates operational environment of BNS and possible failure reasons of the service, and illustrates the change in BNS Quality of Service due to probable transport layer errors. This paper describes the method of testing the concept of proposed network systems on the drawing board, and emphasizes design points for a new system. Nevertheless, the proposed method is by no means conclusive. Rather, it describes an engineering approach to define the main problems while creating MANET-based networking systems.

Cross-Layer Design Based Optimized Link State Routing Protocol for Wireless Mesh Networks

A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact factors in route calculation through the cross-layer operation mechanism： the node available bandwidth, the node load, the link delivery rate, and the link interference, and thus the effect of route selection is optimized greatly. The simulation results show that the proposed CL-OLSR protocol can not only improve the network throughput to a large extent, but also reduce the end-to-end delay, while achieving load balance route results.

Physical layer design of wireless sensor network nodes

Major consideration dimensions for the physical layer design of wireless sensor network （WSN） nodes is analyzed by comparing different wireless communication approaches, diverse mature standards, important radio frequency （RF） parameters and various microcontroller unit （MCU） solutions. An implementation of the WSN node is presented with experimental results and a novel ＂one processor working at two frequencies＂ energy saving strategy. The lifetime estimation issue is analyzed with consideration to the periodical listen required by common WSN media access control （MAC） algorithms. It can be concluded that the startup time of the RF which determines the best sleep time ratio and the shortest backoff slot time of MAC, the RF frequency and modulation methods which determinate the RX and TX current, and the overall energy consumption of the dual frequency MCU SOC （ system on chip） are the most essential factors for the WSN node physical layer design.

A Stream Control Transmission Protocol Based OAM System of 3G Cellular Network

OAM (Operations, Administration and Maintenance) system is a very impo rtant component of 3G cellular network. In order to acquire overall managemen t, fast response and steady operation, an SCTP (Stream Control Transmission Prot ocol) based OAM, i.e., SOAM system was proposed. SOAM implements new characters of SCTP such as multi-stream, enforced SACK and heartbeat mechanism on its tran sport layer. These characters help SOAM decrease the message transmission delay and accelerate the link failure detection. Besides, a new component named SOAM agent was introduced to improve the operation efficiency of SOAM. The experim ental results prove the proposed SOAM system achieves better performance on sign aling transmission compared with conventional TCP based OAM system.