In the urban residential building stock, a major proportion is constituted by low-rise individual buildings. In addition to cost, quality and duration, energy consumed for the project needs to be accounted in the deci...In the urban residential building stock, a major proportion is constituted by low-rise individual buildings. In addition to cost, quality and duration, energy consumed for the project needs to be accounted in the decision making process. Minimizing the cost of construction without compromising on the architectural and structural requirements is the primary objective of the residential buildings of stake-holders, especially the owners. The choice of structural system and the materials used for construction play a crucial role in this effort. This means that the use of expensive and/or voluminous materials such as cement, steel, masonry etc. is optimized. This could lead to significant reduction in embodied energy as well, if the choice of the structural system is prudently made. In this paper, an attempt has been made to quantify the cost and embodied energy benefits for a low-rise residential building by choosing two different structural systems, namely moment resisting framed (MRF) construction system and the partly load-bearing (PLB) system. The influence of choice of materials, contributing to reduction of cost and/or energy is discussed. It is clearly noticed that, when the structural system is re-configured as a PLB system from the existing MRF system there is significant reduction in cost and embodied energy without changing the architectural form.展开更多
Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildin...Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildings. On the other hand, ordinary buildings are commonly analysed via response spectrum analysis following the rules of conventional seismic codes, most of which do not take near-field effects into account. This study evaluates the necessity and the adequacy of near-source factors for ordinary fixed-base buildings that are not specifically classified as tall, by comparing dynamic responses of 3, 8, and 15-story benchmark buildings obtained via （1） linear time history analyses using 220 record components from 13 historical earthquakes and 45 synthetic earthquake records of different magnitudes and fault distances and （2） response spectrum analyses in accordance with the Turkish Earthquake Code 2007 -representing seismic codes not taking near-field effects into account- and the Uniform Building Code 1997 which takes near-field effects into account via near-source factors that amplify design response spectrum. It is shown that near-source factors are crucial for the safe design of not-so-tall ordinary fixed-base buildings but those defined in UBC97 may still not be adequate for those located in the vicinity of the fault.展开更多
The research presents an improved method of rational design of energy-efficient low-rise residential buildings according to their life cycle. The mathematical model for finding the optimal version of draft power-effic...The research presents an improved method of rational design of energy-efficient low-rise residential buildings according to their life cycle. The mathematical model for finding the optimal version of draft power-efficient residential building has been developed. For conditions of Ukraine the optimization problem has been set and solved （finding the optimal version of the draft energy-efficient buildings）. The calculations prove the fact that the construction of passive houses in Ukraine today is economically feasible. Scientific and practical regulations, outlined in the research, can be used by all participants of the investment programs, and energy-efficiency projects, renovation projects and developing normative-technical documents.展开更多
Gable roofs with overhangs （eaves） are the common constructions of low-rise buildings on the southeastern coast of China, and they were vulnerable to typhoons from experience. The wind pressure distributions on gabl...Gable roofs with overhangs （eaves） are the common constructions of low-rise buildings on the southeastern coast of China, and they were vulnerable to typhoons from experience. The wind pressure distributions on gable roofs of low-rise buildings are investigated by a series of wind tunnel tests which consist of 99 test cases with various roof pitches, height-depth ratios and width-depth ratios. The block pressure coefficients and worst negative （block） pressure coefficients on different roof regions of low-rise buildings are proposed for the main structure and building envelope, respectively. The effects of roof pitch, height-depth ratio, and width-depth ratio on the pressure coefficients of each region are analyzed in detail. In addition, the pressure coefficients on the roofs for the main structure and building envelope are fitted according to roof pitch, height-depth ratio and width-depth ratio of the low-rise building. Meanwhile, the rationality of the fitting formulas is verified by comparing the fitting results with the codes of different countries. Lastly, the block pressure coefficients and worst negative pressure coefficients are recommended to guide the design of low-rise buildings in typhoon area and act as references for the future＇s modification of wind load codes.展开更多
This study presents a development of an advanced cyberbased database-enabled design module for low- rise buildings （DEDM-LR） which provides estimation of the wind-induced responses for main wind force resisting fram...This study presents a development of an advanced cyberbased database-enabled design module for low- rise buildings （DEDM-LR） which provides estimation of the wind-induced responses for main wind force resisting frames by making direct use of pressure time histories measured at a large number of pressure taps over a suite of building models. These responses may be considered in lieu of code-specified load effects in which the overall accuracy may be influenced by the inherent simplifications in codes. In addition, this new automated approach is particularly attractive and advantageous as it allows a web-based online analysis/design via intuitive user-friendly interfaces for both the input and output in terms of familiar web-style forms that are nowadays very common in most of web-based services. Presently, the DEDM-LR hosts an aerodynamic database developed by the Tokyo Polytechnic University （TPU）, Japan for a variety of building configurations like flat, gable, and hip roofs under suburban terrain flow condition with immediate application to other databases. The paper shows the efficacy and validity of the DEDM-LR by walking through its details and examples on selected gable-roofed buildings. The architecture of DEDM-LR platform offers the ability to pool resources by hosting other databases that may become available in the near future.展开更多
This paper presents an extensive review of existing techniques used in estimating design wind pressures considering Reynolds number and turbulence effects,as well as a case study of a reference building investigated e...This paper presents an extensive review of existing techniques used in estimating design wind pressures considering Reynolds number and turbulence effects,as well as a case study of a reference building investigated experimentally.We shed light on the limitations of current aerodynamic testing techniques,provisions in design standards,and computational fluid dynamics(CFD)methods to predict wind-induced pressures.The paper highlights the reasons for obstructing the standardization of the wind tunnel method.Moreover,we introduce improved experimental and CFD techniques to tackle the identified challenges.CFD provides superior and efficient performance by employing wall-modeled large-eddy simulation(WMLES)and hybrid RANS-LES models.In addition,we tested a large-scale building model and compared the results with published small-scale data.The findings reinforce our hypothesis concerning the scaling issues and Reynolds number effects in aerodynamic testing.展开更多
文摘In the urban residential building stock, a major proportion is constituted by low-rise individual buildings. In addition to cost, quality and duration, energy consumed for the project needs to be accounted in the decision making process. Minimizing the cost of construction without compromising on the architectural and structural requirements is the primary objective of the residential buildings of stake-holders, especially the owners. The choice of structural system and the materials used for construction play a crucial role in this effort. This means that the use of expensive and/or voluminous materials such as cement, steel, masonry etc. is optimized. This could lead to significant reduction in embodied energy as well, if the choice of the structural system is prudently made. In this paper, an attempt has been made to quantify the cost and embodied energy benefits for a low-rise residential building by choosing two different structural systems, namely moment resisting framed (MRF) construction system and the partly load-bearing (PLB) system. The influence of choice of materials, contributing to reduction of cost and/or energy is discussed. It is clearly noticed that, when the structural system is re-configured as a PLB system from the existing MRF system there is significant reduction in cost and embodied energy without changing the architectural form.
文摘Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildings. On the other hand, ordinary buildings are commonly analysed via response spectrum analysis following the rules of conventional seismic codes, most of which do not take near-field effects into account. This study evaluates the necessity and the adequacy of near-source factors for ordinary fixed-base buildings that are not specifically classified as tall, by comparing dynamic responses of 3, 8, and 15-story benchmark buildings obtained via （1） linear time history analyses using 220 record components from 13 historical earthquakes and 45 synthetic earthquake records of different magnitudes and fault distances and （2） response spectrum analyses in accordance with the Turkish Earthquake Code 2007 -representing seismic codes not taking near-field effects into account- and the Uniform Building Code 1997 which takes near-field effects into account via near-source factors that amplify design response spectrum. It is shown that near-source factors are crucial for the safe design of not-so-tall ordinary fixed-base buildings but those defined in UBC97 may still not be adequate for those located in the vicinity of the fault.
文摘The research presents an improved method of rational design of energy-efficient low-rise residential buildings according to their life cycle. The mathematical model for finding the optimal version of draft power-efficient residential building has been developed. For conditions of Ukraine the optimization problem has been set and solved （finding the optimal version of the draft energy-efficient buildings）. The calculations prove the fact that the construction of passive houses in Ukraine today is economically feasible. Scientific and practical regulations, outlined in the research, can be used by all participants of the investment programs, and energy-efficiency projects, renovation projects and developing normative-technical documents.
文摘Gable roofs with overhangs （eaves） are the common constructions of low-rise buildings on the southeastern coast of China, and they were vulnerable to typhoons from experience. The wind pressure distributions on gable roofs of low-rise buildings are investigated by a series of wind tunnel tests which consist of 99 test cases with various roof pitches, height-depth ratios and width-depth ratios. The block pressure coefficients and worst negative （block） pressure coefficients on different roof regions of low-rise buildings are proposed for the main structure and building envelope, respectively. The effects of roof pitch, height-depth ratio, and width-depth ratio on the pressure coefficients of each region are analyzed in detail. In addition, the pressure coefficients on the roofs for the main structure and building envelope are fitted according to roof pitch, height-depth ratio and width-depth ratio of the low-rise building. Meanwhile, the rationality of the fitting formulas is verified by comparing the fitting results with the codes of different countries. Lastly, the block pressure coefficients and worst negative pressure coefficients are recommended to guide the design of low-rise buildings in typhoon area and act as references for the future＇s modification of wind load codes.
文摘This study presents a development of an advanced cyberbased database-enabled design module for low- rise buildings （DEDM-LR） which provides estimation of the wind-induced responses for main wind force resisting frames by making direct use of pressure time histories measured at a large number of pressure taps over a suite of building models. These responses may be considered in lieu of code-specified load effects in which the overall accuracy may be influenced by the inherent simplifications in codes. In addition, this new automated approach is particularly attractive and advantageous as it allows a web-based online analysis/design via intuitive user-friendly interfaces for both the input and output in terms of familiar web-style forms that are nowadays very common in most of web-based services. Presently, the DEDM-LR hosts an aerodynamic database developed by the Tokyo Polytechnic University （TPU）, Japan for a variety of building configurations like flat, gable, and hip roofs under suburban terrain flow condition with immediate application to other databases. The paper shows the efficacy and validity of the DEDM-LR by walking through its details and examples on selected gable-roofed buildings. The architecture of DEDM-LR platform offers the ability to pool resources by hosting other databases that may become available in the near future.
基金The second author(A.M.Aly)received financial support from the Louisiana Board of Regents(RCS,LEQSF(2021-22)-RD-A-30)Also,the second author received funds from the NSF I-Corps program at Louisiana State University.The findings are those of the authors and do not necessarily reflect the position of the funding sponsors.
文摘This paper presents an extensive review of existing techniques used in estimating design wind pressures considering Reynolds number and turbulence effects,as well as a case study of a reference building investigated experimentally.We shed light on the limitations of current aerodynamic testing techniques,provisions in design standards,and computational fluid dynamics(CFD)methods to predict wind-induced pressures.The paper highlights the reasons for obstructing the standardization of the wind tunnel method.Moreover,we introduce improved experimental and CFD techniques to tackle the identified challenges.CFD provides superior and efficient performance by employing wall-modeled large-eddy simulation(WMLES)and hybrid RANS-LES models.In addition,we tested a large-scale building model and compared the results with published small-scale data.The findings reinforce our hypothesis concerning the scaling issues and Reynolds number effects in aerodynamic testing.
