The impacts of low and high-frequency variability from teleconnections between large scale atmospheric processes and local weather as well as emissions changes on concentrations of particulate matter of 2.5 μm or les...The impacts of low and high-frequency variability from teleconnections between large scale atmospheric processes and local weather as well as emissions changes on concentrations of particulate matter of 2.5 μm or less in diameter ([PM2.5]) were examined for the Fairbanks Metropolitan Area (FMA). October to March and May to August mean [PM2.5] were 1.8 and 3.1 μg·m-3 higher for positive than negative annual mean Pacific Decadal Oscillation. Annual mean [PM2.5] were 3.8 μg·m-3 lower for positive than negative Southern Oscillation Index. On 1999-2018 average, [PM2.5] decreased 2.9 μg·m-3·decade-1. On average over October to March, decadal and inter-annual variability caused higher or similar differences in mean observed [PM2.5] and its species than emission-control measures. The 2006 implementation of Tier 2 for new vehicles decreased observed sulfate concentrations the strongest (~4.95 μg·m-3·decade-1) of all occurred emissions changes. On average, observed [PM2.5] showed elevated values at all sites when wind blew from directions of hot springs. The same was found for the sulfate, ammonium and non-metal components of PM2.5. Observations showed that these geothermal waters contain sulfate, ammonia, boric acid and non-metals. Hot springs of such composition are known to emit hydrogen sulfide and ammonia that can serve as precursors for ammonium and sulfate aerosols.展开更多
The fatigue behavior of high speed steel （HSS） roll materials for hot rolling was researched under watercooling conditions by laser impacting. The microstructure of HSS sample and the morphologies of fatigue samples...The fatigue behavior of high speed steel （HSS） roll materials for hot rolling was researched under watercooling conditions by laser impacting. The microstructure of HSS sample and the morphologies of fatigue samples were observed by scanning electron microscope. The phase structure was detected by XRD. The morphology of situ oxide scale was observed by optical microscope, and the expansion coefficient was measured by TGA. The experiment results indicate that the cracks come into being at the carbide-matrix interface, but there are no cracks in the matrix after many times of laser impacting treatment, for the situ sample taken from the fractured roll surface, big carbides are more sensitive to the fatigue, and peel off prior to small ones. The relevant fatigue mechanisms are also discussed.展开更多
文摘The impacts of low and high-frequency variability from teleconnections between large scale atmospheric processes and local weather as well as emissions changes on concentrations of particulate matter of 2.5 μm or less in diameter ([PM2.5]) were examined for the Fairbanks Metropolitan Area (FMA). October to March and May to August mean [PM2.5] were 1.8 and 3.1 μg·m-3 higher for positive than negative annual mean Pacific Decadal Oscillation. Annual mean [PM2.5] were 3.8 μg·m-3 lower for positive than negative Southern Oscillation Index. On 1999-2018 average, [PM2.5] decreased 2.9 μg·m-3·decade-1. On average over October to March, decadal and inter-annual variability caused higher or similar differences in mean observed [PM2.5] and its species than emission-control measures. The 2006 implementation of Tier 2 for new vehicles decreased observed sulfate concentrations the strongest (~4.95 μg·m-3·decade-1) of all occurred emissions changes. On average, observed [PM2.5] showed elevated values at all sites when wind blew from directions of hot springs. The same was found for the sulfate, ammonium and non-metal components of PM2.5. Observations showed that these geothermal waters contain sulfate, ammonia, boric acid and non-metals. Hot springs of such composition are known to emit hydrogen sulfide and ammonia that can serve as precursors for ammonium and sulfate aerosols.
基金ItemSponsored by National Natural Science Foundation of China (50274028) State Key Fundamental Research Project(G19990650)
文摘The fatigue behavior of high speed steel （HSS） roll materials for hot rolling was researched under watercooling conditions by laser impacting. The microstructure of HSS sample and the morphologies of fatigue samples were observed by scanning electron microscope. The phase structure was detected by XRD. The morphology of situ oxide scale was observed by optical microscope, and the expansion coefficient was measured by TGA. The experiment results indicate that the cracks come into being at the carbide-matrix interface, but there are no cracks in the matrix after many times of laser impacting treatment, for the situ sample taken from the fractured roll surface, big carbides are more sensitive to the fatigue, and peel off prior to small ones. The relevant fatigue mechanisms are also discussed.
