Effect of Shrinkage Reducing Agent and Steel Fiber on the Fluidity and Cracking Performance of Ultra-High Performance Concrete

Due to the low water-cement ratio of ultra-high-performance concrete(UHPC),fluidity and shrinkage cracking are key aspects determining the performance and durability of this type of concrete.In this study,the effects of different types of cementitious materials,chemical shrinkage-reducing agents(SRA)and steel fiber(SF)were assessed.Compared with M2-UHPC and M3-UHPC,M1-UHPC was found to have better fluidity and shrinkage cracking performance.Moreover,different SRA incorporation methods,dosage and different SF types and aspect ratios were implemented.The incorporation of SRA and SF led to a decrease in the fluidity of UHPC.SRA internal content of 1%(NSRA-1%),SRA external content of 1%(WSRA-1%),STS-0.22 and STE-0.7 decreased the fluidity of UHPC by 3.3%,8.3%,9.2%and 25%,respectively.However,SRA and SF improved the UHPC shrinkage cracking performance.NSRA-1%and STE-0.7 reduced the shrinkage value of UHPC by 40%and 60%,respectively,and increased the crack resistance by 338%and 175%,respectively.In addition,the addition of SF was observed to make the microstructure of UHPC more compact,and the compressive strength and flexural strength of 28 d were increased by 26.9%and 19.9%,respectively.

Anti-cracking Property of EVA-modified Polypropylene Fiber-reinforced Concrete Under Thermal-cooling Cycling Curing

In order to investigate the synergistic effect of re-dispersible powder-ethylene-vinyl acetate copolymer(EVA) and polypropylene fiber on the crack resistance of concrete under thermal fatigue loading, the compressive strength, ultimate tensile strength, ultimate tensile strain and tensile modulus of elasticity were tested. In addition, ultrasonic method and scanning electron microscope analysis were used to explain the microstructure mechanism. The results show that polypropylene fiberreinforced concrete presents a better performance on crack resistance than ordinary concrete, and the synergism of EVA and polypropylene fiber can improve the anti-cracking ability of concrete further.

Influence of MgO-type Expansive Agent Hydration Behaviors on Expansive Properties of Concrete

The hydration behaviors and expansive properties of MgO-type expansive agent curing at different temperatures and environment were investigated.When the curing temperatures changed from 25℃ to 50℃,the conductivities of MgO samples increased from 40 to 80 μs/cm,and the hydrations of MgO were quickened up obviously.Through SEM observation,the hydration product of MgO cured at 50℃ for 28 day was about 2-3μm in length.The expansion of pastes with 5% of the MgO-type expansive agent was from 0.36% to 1.01% when the curing temperature changed from 25oC to 50℃.When 8% of the MgO-type expansive agent was added,the early shrinkage of concrete was reduced.The expansion ratio increased with the curing temperature,and the expansive cracking of concrete with MgO-type expansive agent might be decreased by blending fly ash.

Development of Soda Residue Concrete Expansion Agent

A new type of concrete expansion agent has been successfully developed for the first time in the world by utilizing an industrial waste residue soda residue and an industrial wasteliquor.Adding 3%-6% of the agent into Portland cement enables a shrinkage compensating concrete to be prepared.Mortar and concrete containing this expansion agent have better shrinkage compensating and mechanical properties.The raw materials component,production process,technical properties,micro analysis of mortar made with this expansion agent,mechanism of expansion and research results are described in this article.The experimental results show that the new type of concrete expansion agent accords with the standard and its main mineral component is xCaO ySO 3 zAl 2O 3.

Effect of Fly Ash and Early Strength Agent on Durability of Concrete Exposed to the Cyclic Sulfate Environment

The effect of fly ash and early strength agent on resistance of concrete to the cyclic sulfate environment was studied.Concrete specimens made with ordinary portland cement or ordinary portland cement incorporating fly ash with the replacement of 10% or 20%,or 1% early strength agent and fly ash with the replacement of 20%,were made and subjected to 250 cycles of exposure to the cyclic sulfate environment.Concrete properties including loss of mass,chloride ion diffusion coefficient,compressive strength and flexural strength were measured.Microstructure and chemical component of samples were determined by means of X-ray diffraction,scanning electron microscopy and energy dispersive spectroscopy.The experimental results indicated that effect of fly ash on the cyclic sulfate resistance of concretes was mostly dependent on the amount of fly ash.Early strength agent improved performances of concrete with 20% fly ash exposed to cyclic sulfate environment.

The Influence of Chemical Admixtures on the Fluidity,Viscosity and Rheological Properties of Ultra-High Performance Concrete

To achieve higher strength and better durability,ultra-high performance concrete(UHPC)typically employs a relatively small water-binder ratio.However,this generally leads to an undesired increase in the paste viscosity.In this study,the effects of liquid and powder polycarboxylate superplasticizers(PCE)on UHPC are compared and critically discussed.Moreover,the following influential factors are considered:air-entraining agents(AE),slump retaining agents(SA),and defoaming agents(DF)and the resulting flow characteristics,mechanical properties,and hydration properties are evaluated assuming UHPC containing 8‰powder PCE(PCE-based UHPC).It is found that the spread diameter of powder PCE is 5%higher than that of liquid PCE.Among the chemical admixtures studied,AEs have the best effect on improving UHPC workability,while DFs have the worst effect.When the addition of AE and SA is 1.25‰and 14.7%of PCE,paste viscosity reduces by 35%and 19%,respectively compared to the paste with only 8‰PCE.A low AE dosage(1.25‰)decreases compressive strength by 4.1%,while SA(8.1%)increases UHPC compressive strength by 9.1%.Both AE and SA significantly delay the UHPC hydration process,reducing the hydration heat release peaks by 76%and 27%,respectively.

On the Preparation of Low-Temperature-Rise and Low-Shrinkage Concrete Based on Phosphorus Slag

The effects of different contents of a MgO expansive agent and phosphorus slag on the mechanical properties,shrinkage behavior,and the heat of hydration of concrete were studied.The slump flow,setting time,dry shrinkage,and hydration heat were used as sensitive parameters to assess the response of the considered specimens.As shown by the results,in general,with an increase in the phosphorus slag content,the hydration heat of concrete decreases for all ages,but the early strength displays a downward trend and the dry shrinkage rate increases.The 90-d strength and dry shrinkage of concrete could be improved with a phosphorus residue content between 0%-20%,with the best performances in terms of mechanical properties and shrinkage characteristics being achieved for a content of 20 kg/m^(3).On the basis of these results,it can be concluded that appropriate amounts of phosphorus slag and MgO expansive agent can be used to improve the compressive strength of concrete in the later stage by reducing the hydration heat and dry shrinkage rate,respectively.

Mechanism and Process of Sulfate Attack on Roller Compacted Concrete with MgO Expansive Agent

The mechanisms and processes of sulfate attack on roller compacted concrete(RCC)with MgO expansive agent are proposed by investigating the microstructure and hydration products in specimens immersed in 5%sodium sulfate solution for one year with the optical micrograph,scanning electron microscopy(SEM)and scanning electron microscopy-energy dispersive spectrometer(SEM-EDS).The results show that the deterioration of concrete due to the sulfate attack is mainly loss of stiffness,strength and adhesion,and expansion cracking is mainly caused by the formation of gypsum and ettringite.In the presence of MgO expansive agent,the microstructures of RCC can be improved by hydration and un-hydrated products,the large pores and permeability are reduced,and the resistance to sulfate corrosion of concrete and durability of hydraulic structure are improved slightly.

Cracking and Mechanical Properties of Airport Concrete Pavement with Fiber and Expansive Agent

Polypropylene fiber and expansive agent are used in airport concrete to improve its shrinkage cracking resistance and mechanical properties.The concrete specimens with amount content of polypropylene fiber or expansive agent or both of them are prepared.The morphology of specimens is observed by scanning electron microscope,the time when the first crack occurred is recorded through slap test,and the mechanical properties such as compressive strength and impact energies of concrete are measured.The results show that polypropylene fiber in concrete can reduce the shrinkage and delay the first crack,improve the impact resistance obviously,and improve the compressive strength slightly.Expansive agent can compensate the shrinkage and reduce cracks of concrete pavement markedly,and improve the mechanical properties of concrete pavement slightly.The study provides recommendations for cracking control of airport concrete pavement in the future.

Expansion Performance and Microstructure of High-performance Concrete using Differently Scaled MgO Agents and Mineral Powder

To investigate the assumptions proposed in this paper,the evolution law governing the strength and expansion performance of MgO and nano-MgO micro-expansive concrete in the environment of mineral powder was firstly observed in this study.Secondly,SEM,XRD,and TG-DSC microscopic tests were conducted to reveal the effects of the active mineral-powder admixture on the hydration degree and expansion performance of MgO and nano-MgO in HPC.Our experimental results successfully verified our hypothesis,which indicated that the expansion performance of macro-MgO and nano-MgO was indeed depressed by the addition of active mineral power admixtures,even though the mechanical property of concrete composites was effectively improved.Furthermore,the hydration test also demonstrated the negative interference on the mineral powders,which was induced by the expansion agents.It is found the amounts of hydrates tend to decrease because the mineral powder ratio reaches and exceeds 40%.Moreover,it is also concluded the effect of expansion agents is governed by the alkalinity cement paste,especially for the nano-MgO.In other words,the expansion performance of nano-MgO will vary more obviously with the hydration process,than MgO.The results of this study provide that effective experimental and theoretical data support the hydration-inhibition mechanism of magnesium expansive agents.

Interactions between Superplasticizer and Release Agents at the Concrete/Formwork Interface

Improving the knowledge of rheological and tribological characteristics of fresh concrete is important to contribute to the progress of construction sites and the final quality of the work. The objective of this study is to identify the effect of a superplasticizer based on polycarboxylic ether on the tribological behavior of fresh concrete at the concrete/formwork and concrete/oil/formwork interfaces. Friction tests on fresh concrete were carried out using a plan/plan tribometer. In order to study the behavior of the superplasticizer close to the formwork, three concretes with 30% of paste and different dosage of superplasticizer were formulated. The results show that the increase of the dosage of superplasticizer reduces the friction stress. The properties of the superplasticizer generate a deflocculating action of concrete grains and lead to a stabilisation of the soap-oil micellae present in the vicinity of the formwork. Thus, the efficiency of superplasticizer depends on the quantity of fines, on the quantity of soap formed and so, on the release agent formulation.

STUDY ON OPTIMIZATION OF HIGH PERFORMANCE CONCRETE ADMIXTURES

Influences of admixtures on the workability and strength of high performance concrete （HPC） are in- vestigated. The types of investigated admixtures include naphthalene series high range water reducing agent, polycarboxlic series high range water reduce agent and sodium sulfate hardening accelerating agent. Two kinds of curing condition, namely steam curing condition and standard curing condition, are adopted. The result shows that HPC, added with polycarboxlic series of high performance water reducer, has high workability and strength, while sodium sulfate accelerating agent causes poor workability and low strength. Thus for vapor-cured HPC and its formulations, naphthalene series high range water reducing agent with less sodium sulfate should be given pri- ority. Therefore, the differences of curing conditions should be considered when selecting HPC admixtures.

Influence of MB-value of Manufactured Sand on the Shrinkage and Cracking of High Strength Concrete

The relation between methylene blue （MB） value of MS and its limestone dust content and clay content was investigated. The effects of MB value ranging from 0.35 to 2.5 on the workability of fresh concrete and crack propagation characteristics at the age of 24 hours, and effects on the mechanical properties, dry shrinkage of the harden concrete were tested. The experimental results show that the MB value is not related with the limestone dust content of MS, but in direct proportion to clay content. With the increase of MB value, the concrete workability decreases, and the flexural strength and 7 d compressive strength reduce markedly, whearas the 28 d compressive strength is not affected. When the MB-value is less than or equal to 1.35, the change of the MB-value has a little influence on early plastic cracking and dry shrinkage property of concrete, but when the MB-value is more than 1.35, the tendency of plastic cracking and dry shrinkage is remarkable.

Rheological Properties of Self-compacting Concrete Paste Containing Chemical Admixtures

Self-compacting concrete （SCC） was used for the filling layer of CRTSⅢ plate ballastless track, which needs excellent workability. The rheological properties of SCC cement paste containing chemical admixtures （CA） such as polycarboxylate-based superplasticizer （PCE）, air-entraining agent （AE） and defoamer （DF） were investigated using a Brookfield R/S SST2000 soft solid tester with a vane geometry spindle. The cementitious materials were designed as one, two and, three components systems by addition of ordinary portland cement （OPC） with these chemical admixtures. The rheological properties of one-component system （PCE paste） were improved with increasing the content of PCE. For two components systems of PCE-AE and PCE-DF, yield stress and plastic viscosity reduced firstly and increased afterward with the increasing of AE content. And the plastic viscosity reached the optimum when the content of AE is 0.004wt%. In general, the trend of yield stress and plastic viscosity decreased with the increasing of the DF content. For three components systems, PCE-AE-DF systems, the rheological properties were improved compared with the sample with AE or DF, which attributed to mixes of the active components mentioned above （CA） which could have a synergetic effect.

Effects of Shale and CaO Incorporation on Mechanical Properties and Autogenous Deformation of Early-age Concrete

The pre-soaked shale employed as an internal curing agent and CaO employed as expansion agent were incorporated into concrete to investigate their effects on the mechanical properties and autogenous deformation of early-age concrete.We have conducted the relevant tests for setting time,mechanical properties,internal relative humidity and autogenous deformation of early-age concrete with shale or/and CaO incorporation.The results indicate that the set behavior is delayed by shale addition but is accelerated with CaO.The shale addition firstly enhances and subsequently decreases the strength,but CEA addition has a weakening effect.Additionally,shale or/and CaO incorporation deteriorates the elastic modulus.The shale and CaO incorporation significantly improve the internal relative humidity of concrete.The internal curing efficacy of shale could synergistically mitigate the autogenous shrinkage,that is,could enhance the expansion of CaO and then greatly reduce the contraction,which is significantly beneficial to impede the shrinkage-introduced cracks of early-age concrete.

Research on the influence of the fly ash on the concrete carbonation

The influence of fly ash on the fresh properties, mechanical properties and carbonation properties were studied in this paper. The performance of a kind of curing agent which was applied to the hardened concrete surface was evaluated. Incorporating large volume of fly ash will risk the concrete carbonation. The curing agent could prevent the concrete carbonation, and the mechanism was explained.

Effi ciency of Concrete Crack-healing based on Biological Carbonate Precipitation

The aim of this study was to improve the capacity for crack-repair in concrete by developing a new way. The self-healing agent based on biological carbonate precipitation was developed. Crack-healing capacity of the cement paste specimens with this biochemical agent was researched. Scanning electron microscopy（SEM） and X-ray diffraction（XRD） were used to characterize the precipitation in cracks.The healing efficiency was evaluated by measuring the water permeability after crack healing as well.The experimental results show that the applied biochemical agent can successfully improve the self-healing capacity of the cement paste specimens as larger cracks can be healed. The cracks with a width of 0.48 mm in the specimens with the biochemical agent are nearly fully healed by the precipitation after 80 d repair. SEM and XRD analysis results demonstrate that the white precipitation in cracks is calcium carbonate, which displays spherical crystal morphology. Meanwhile, the water permeability test result shows that the biochemical agent can significantly decrease the water permeability of the cement paste specimens, the water permeability of specimens with the biochemical agent respectively decreases by 84% and 96% after 7 d and 28 d immersion in water, however the control specimens only respectively decrease by 41% and 60%, which indicates that the bacteria-based concrete appears to be a promising approach to increase concrete durability.

Performance Investigation of Square Concrete-filled Steel Tube Columns

The behaviour of square concrete-filled steel tube columns under concentrical loading was studied. More than one hundred specimens were tested to investigate the effects of thickness of steel tube on the load carrying capacity of the concrete-filled tubular columns （CFTs）. The effect of the grade of concrete and content of expansive agent were also investigated. The effect of these parameters on the confinement of the concrete core was studied as well. From the experimental study it was found that for both CFTs with different strength grade concrete core, the ultimate load carrying capacity increases with the increase in percentage of expansive agent up to 20% but it again decreases at 25% of expansive agent content. It was also shown that the failure mode of CFTs depends on the strength grade of concrete core.

THE SHRINKAGE OF EXPANSIVE CONCRETE FILLED STEEL TUBE AND ITS IMPROVEMENT METHOD

The shrinkage characteristics tics of expansive concrete filled steel tube (CFST) are analyzed, Cold shrinkage, creep and autogenous shrinkage are considered as the main reasons of causing CFST contraction. In accordance with the shrinkage characteristics of expansive CFST, a kind of energy-stored delayed expansive agent is exploited, which can not only compensate the shrinkage of the core concrete in every stages, but also make CFST expand according to the delayed expansion mechanism. As the result, the prestress loss weill be reduced and expansive energy will be utilized effectively.

Freeze-thaw bond properties of new-old concrete

Using composite cubic specimens of new-old concrete,the bond splitting tensile strength and failure mechanism for the interface of new-old concrete in saturating state were explored when exposed to freeze-thaw cycling. Specimens were experienced for 0,25,50,75,100 and 125 freezing cycles. The roughness and adhesion agent including cement paste,cement mortar and cement paste with 10 percent of UEA expanding agent were also investigated. The test results indicate that the bond splitting tensile strength decreases with increased numbers of freezing-and-thawing cycles. The roughness and adhesion agent have different effects on the bond strength.