Formwork lateral pressure of precast normal-concrete composite shear walls infilled with self-compacting concrete

Wall cracking and mold expanding due to concrete vibrations can be effectively solved through the application of precast normal-concrete composite shear walls infilled with self-compacting concrete(SCC). However, the high liquidity of SCC will induce a higher lateral pressure. Therefore, it is important to obtain a better understanding of the template lateral pressure. In this work, nine composite shear walls were experimentally investigated, focusing on the effects of two parameters, i.e., the casting rate and the section width of the formwork. The time-varying pressure was monitored during the SCC pouring. It is found that the increase of casting rate from 3.2 m/h to 10.3 m/h resulted in a higher maximum lateral pressure. The higher casting rate led to a longer time required for the lateral pressure to drop to a steady value. There was no correlation between the section width and the rate of decrease in the initial formwork pressure and stable value. Based on the test results, a formula considering the effect of casting speed for the calculation of SCC formwork pressure was established to fill the gap in the current standards and for engineering applications.

Experimental and analytical study on seismic behavior of steel-concrete multienergy dissipation composite shear walls

In this paper, a steel-concrete multi-energy dissipation composite shear wall, comprised of steel-reinforced concrete （SRC） columns, steel plate （SP） deep beams, a concrete wall and energy dissipation strips, is proposed. In order to study the multi-energy dissipation behavior and restorability after an earthquake, two stages of low cyclic loading tests were carded out on ten test specimens. In the first stage, test on five specimens with different number of SP deep beams was carried out, and the test lasted until the displacement drift reached 2%. In the second stage, thin SPs were welded to both sides of the five specimens tested in the first stage, and the same test was carried out on the repaired specimens （designated as new specimens）. The load-bearing capacity, stiffness, ductility, hysteretic behavior and failure characteristics were analyzed for both stages and the results are discussed herein. Extrapolating from these results, strength calculation models and formulas are proposed herein and simulations using ABAQUS carried out, they show good agreement with the test results. The study demonstrates that SRC columns, SP deep beams, concrete wall and energy dissipation strips cooperate well and play an important role in energy dissipation. In addition, this study shows that the shear wall has good recoverability after an earthquake, and that the welding of thin SP＇s to repair a deformed wall is a practicable technique.

Research on seismic performance of shear walls with concrete filled steel tube columns and concealed steel trusses

In order to further improve the seismic performance of RC shear walls, a new composite shear wall with concrete filled steel tube （CFT） columns and concealed steel trusses is proposed. This new shear wall is a double composite shear wall; the first composite being the use of three different force systems, CFT, steel truss and shear wall, and the second the use of two different materials, steel and concrete. Three 1/5 scaled experimental specimens： a traditional RC shear wall, a shear wall with CFT columns, and a shear wall with CFT columns and concealed steel trusses, were tested under cyclic loading and the seismic performance indices of the shear walls were comparatively analyzed. Based on the data from these experiments, a thorough elastic-plastic finite element analysis and parametric analysis of the new shear walls were carried out using ABAQUS software. The finite element results of deformation, stress distribution, and the evolution of cracks in each phase were compared with the experimental results and showed good agreement. A mechanical model was also established for calculating the load-carrying capacity of the new composite shear walls. The results show that this new type of shear wall has improved seismic performance over the other two types of shear wails tested.

Analysis and seismic tests of composite shear walls with CFST columns and steel plate deep beams

A composite shear wall concept based on concrete filled steel tube （CFST） columns and steel plate （SP） deep beams is proposed and examined in this study. The new wall is composed of three different energy dissipation elements： CFST columns; SP deep beams; and reinforced concrete （RC） strips. The RC strips are intended to allow the core structural elements - the CFST columns and SP deep beams - to work as a single structure to consume energy. Six specimens of different configurations were tested under cyclic loading. The resulting data are analyzed herein. In addition, numerical simulations of the stress and damage processes for each specimen were carried out, and simulations were completed for a range of location and span-height ratio variations for the SP beams. The simulations show good agreement with the test results. The core structure exhibits a ductile yielding mechanism characteristic of strong column-weak beam structures, hysteretic curves are plump and the composite shear wall exhibits several seismic defense lines. The deformation of the shear wall specimens with encased CFST column and SP deep beam design appears to be closer to that of entire shear walls. Establishing optimal design parameters for the configuration of SP deep beams is pivotal to the best seismic behavior of the wall. The new composite shear wall is therefore suitable for use in the seismic design of building structures.

钢管混凝土键连接框架梁和剪力墙的受剪性能

目的 研究钢管混凝土键连接框架梁和剪力墙的受剪性能,为工程应用提供设计依据。方法 应用有限元分析软件ABAQUS对比钢管混凝土键连接与现浇连接梁墙的结构受剪性能,分析前者受剪机理及不同因素对受剪性能的影响。结果 钢管混凝土键连接梁墙的结构承载力和延性系数较现浇结构分别提高约10%和34%;钢材强度从Q235到Q390,初始刚度增加8.44%;截面高度从100 mm到120 mm,延性系数提高17.73%;截面厚度每增加2 mm,承载力提高约15%;截面长度和混凝土强度等级对承载力、初始刚度和延性系数的影响均小于15%,纵向距离对其受剪性能几乎无影响。结论 采用钢管混凝土键连接梁墙的结构总体受剪性能优于现浇结构;钢材强度和截面厚度分别是影响初始刚度和承载力的主要因素。

装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能

为研究装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能,对1个足尺轻钢框架结构试件和3个足尺轻钢框架-轻钢骨架轻混凝土墙板结构试件进行了低周反复荷载下的抗震性能试验及理论分析,试件变量包括:2种装配构造,即内嵌式装配墙板、外贴式装配墙板;2种轻钢骨架轻混凝土墙板,即框架式轻钢骨架轻混凝土墙板、桁架式轻钢骨架轻混凝土墙板。研究了各试件的破坏特征和损伤演化过程,分析了结构滞回特性、承载力、变形能力、刚度退化、耗能性能和应变。结果表明:装配式轻钢框架-轻钢骨架轻混凝土墙板结构共同工作性能良好,其水平承载力相比轻钢框架提高了204.7%~210.4%,抗侧刚度提高了257.3%~512.5%,结构变形及耗能能力有显著提高;内嵌墙板的自攻钉连接构造以及外贴墙板的螺栓连接构造传力性能可靠,结构具备2道抗震防线的受力特征;基于简化塑性分析模型以及拉压杆软化桁架模型,对试件承载力进行了计算,计算结果与试验符合较好。

焊接多腔双钢板-混凝土组合剪力墙抗震性能分析

大多数双钢板-混凝土组合剪力墙采用螺栓连接或焊接肋的方式使钢板和混凝土协同工作。然而,这种连接方式可能导致整体性和塑性变形效率较低,且制作复杂,焊接多腔双钢板-混凝土组合剪力墙能够有效地避免这些问题。为了深入研究焊接多腔双钢板-混凝土组合剪力墙的抗震性能,基于约束混凝土真三轴塑性-损伤本构模型和钢材弹塑性混合强化-韧性损伤本构模型,建立了组合剪力墙的精细化三维实体-壳模型,将模拟所得的滞回曲线、骨架曲线、刚度退化曲线、弹性刚度、承载力、累积耗能、等效阻尼粘滞系数和延性系数与已有拟静力试验结果相比较,发现两者吻合较好。分析结果表明:轴压比对组合剪力墙模型算例刚度和承载力的影响较小,而随剪跨比增大,组合剪力墙模型算例的刚度和承载力呈线性降低;轴压比对组合剪力墙模型算例总塑性耗能的影响较小,而剪跨比的影响较大,剪力墙总塑性耗能随剪跨比增大而降低;轴压比和剪跨比都不会改变算例各部件的耗能分配机制,即组合剪力墙模型算例以外钢板和内隔板耗能为主。

自攻钉集块连接混凝土复合剪力墙抗震性能试验

提出了适用于装配式混凝土复合剪力墙结构的自攻钉集块连接构造,为研究自攻钉集块连接混凝土复合剪力墙的抗震性能,设计制作了3个剪跨比为1.39的足尺剪力墙试件,进行了低周反复荷载试验,主要变量包括自攻钉集块连接构造、自攻钉集块与后浇条带组合连接构造以及L形边框构造柱。分析了试件破坏模式、承载力、滞回特性、刚度及退化、变形能力、耗能性能和应变特征等。结果表明:自攻钉集块连接构造装配便捷,受力性能可靠;采用自攻钉集块与后浇条带组合连接构造试件的承载力及刚度相比自攻钉集块连接构造分别提高了8.54%和6.03%;设置L形边框构造柱的试件承载力、刚度及耗能分别提高了67.48%、129.33%和277.93%。自攻钉集块连接复合剪力墙具有良好的抗震性能,满足装配式低层住宅混凝土复合剪力墙结构的抗震设计要求,可用于实际工程。

新型部分填充钢-混凝土组合梁受剪性能试验及有限元模拟研究

采用合理的材料本构关系,利用ABAQUS有限元软件建立足尺有限元模型,对新型部分填充钢-混凝土组合梁进行受剪承载力分析。结合试验研究,通过改变剪跨比、型钢强度等级、梁高度、型钢腹板厚度、翼缘栓钉间距等因素对新型组合梁组合截面受剪承载力进行了研究。结果表明,新型组合梁有较好的受剪承载力,混凝土强度等级和新型组合梁高度对峰值承载力的影响不显著,但混凝土显著提高了新型组合梁的整体稳定性;而新型组合梁高度每增加50mm,其峰值剪力值约提高7%~21%;型钢腹板厚度每增大2mm,新型组合梁峰值剪力就提高10%左右,腹板对其受剪承载力影响较大。运用叠加原理,结合腹板、翼缘内侧混凝土、翼缘栓钉和箍筋的受剪贡献,对《组合结构设计规范》(JGJ 138—2016)中组合梁截面受剪承载力计算公式进行了优化。结果表明,修正后的计算公式具有良好精度。

装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙轴压性能研究

提出一种装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙,设计3个具有不同配筋形式和混凝土种类的墙板试件进行轴心受压试验,获得墙板在轴压作用下的破坏模式、荷载-位移曲线、荷载-应变曲线、承载力储备系数、延性系数、材料利用率等性能指标。通过ABAQUS有限元分析软件对墙板进行参数化分析,研究内嵌钢板强度和厚度对其轴压性能的影响。结果表明,墙板具有良好的承载力储备能力和延性性能;混凝土中掺入1%体积比的钢纤维可显著提高墙板内混凝土的抗拉性能,使混凝土强度得到更加充分的利用,布置钢筋可以显著提高墙板延性;墙板的承载力和延性随内嵌钢板厚度和强度的增加而增大,强度为Q355、厚度为4、6mm时,墙板材料利用率更高。提出适用于该类墙板的轴压承载力设计公式,考虑钢板屈曲和截面组合效应的墙板轴心受压承载力设计公式计算结果较精确。

带PBL剪力键的钢芯板混凝土组合剪力墙低周往复加载试验研究

为研究带PBL剪力键的钢芯板混凝土组合剪力墙的抗震性能,对1个型钢混凝土组合剪力墙和4个钢芯板混凝土组合剪力墙进行了循环往复加载试验;观察带PBL剪力键的钢芯板混凝土组合剪力墙在水平循环荷载下的破坏全过程,并分析该类剪力墙的滞回特征、变形能力、承载能力、耗能性能、刚度和强度退化能力。结果表明:钢芯板混凝土组合剪力墙的破坏模式主要为弯曲型破坏,滞回曲线较为饱满;配置钢芯板的剪力墙承载力、延性性能和耗能能力较优;PBL剪力键的构造方式可保证钢芯板与混凝土之间的黏结性能完好,PBL剪力键平放会导致剪力墙出现沿PBL剪力键的水平通缝,影响剪力墙承载能力的发挥,建议采用PBL剪力键竖放的构造形式。

界面焊接环向钢筋的钢管混凝土叠合柱抗剪性能研究

为研究界面焊接环向钢筋的钢管混凝土叠合柱的抗剪性能,以环向钢筋的布置间距和直径为研究参数,对6根叠合柱试件进行了横向剪切静力试验和数值模拟,分析了各参数对试件的破坏过程、破坏形态、荷载-跨中挠度曲线以及抗剪承载力的影响规律。研究结果表明:界面环向钢筋布置方案不同的叠合柱试件破坏形态基本相同,均发生斜压破坏;试件的受力过程可划分为弹性阶段、弹塑性阶段、强化阶段和破坏阶段四个阶段;随着界面环向钢筋布置间距的减小,试件的抗剪承载力提高显著,最大增幅达22%;增大界面环向钢筋的直径可提高试件的抗剪承载力,但作用效果有限,最大增幅仅为6.1%。通过试验数据对有限元模型的有效性进行验证,并进一步分析了不同阶段有限元模型的应力状态,明确了此类叠合柱的受剪机理。

部分充填式窄幅钢箱-UHPC组合梁负弯矩下抗剪强度

为研究部分充填式窄幅钢箱-超高性能混凝土(ultra-high performance concrete,UHPC)组合梁在负弯矩下的裂缝开展、局部屈曲和竖向抗剪强度,对5根不同UHPC翼板层厚和钢箱不同充填高强混凝土(high strength concrete,HSC)高度的组合梁试件进行反置正向加载,得到了试件在加载过程中的破坏过程、荷载-裂缝宽度曲线、荷载-跨中挠度曲线、跨中应变分布和腹板应力应变等并进行分析。结果表明:相比于普通混凝土(normal concrete,NC)翼板试件,半UHPC和全UHPC翼板试件其抗剪承载力提升不大,仅8.3%和11.6%;相比于未充填试件,半充填和全充填试件其抗剪承载力分别提升了61.7%和87.2%。用UHPC替换部分NC翼板后试件能有效地控制裂缝发展,钢箱内充填HSC能有效地减小腹板局部屈曲。考虑翼板、钢梁和充填HSC对抗剪承载力的贡献,通过分项叠加法确定试件的抗剪承载力计算方法,能较准确地计算试件的抗剪承载力。

钢板-混凝土组合剪力墙裂缝控制及监测分析

以实际工程为背景,对1.7 m厚钢板-混凝土组合剪力墙的裂缝控制及监测进行分析。大体积混凝土构件,由于其水化热比较高容易产生温度裂缝,基于此首先对原材料及配合比进行优化设计,降低混凝土水化热。然后对大厚度组合剪力墙浇筑后采取合理的养护措施控制其内部温度以及对裂缝发生情况进行实测分析,最后经过一系列针对性的裂缝控制措施及监测结果表明,采用优化设计对大厚度组合剪力墙的裂缝控制优于同类工程的裂缝控制效果。

十字形钢管束高强混凝土组合剪力墙的抗剪承载力研究

为研究不同参数对十字形钢管束高强混凝土组合剪力墙抗剪承载力的影响,通过ABAQUS有限元软件建立了十字形钢管束高强混凝土组合剪力墙的有限元模型,重点考察钢材强度、混凝土强度、钢板厚度、钢管厚度、轴压比、墙体长度、墙体高度、腔体长度等参数对此类组合剪力墙抗剪承载力的影响。分析结果表明:随着钢材强度、钢板厚度、钢管厚度、墙体长度的增加和墙体高度的减小,试件的抗剪承载力呈显著增大趋势;随着混凝土强度的提高和腔体长度的减小,试件的抗剪承载力略呈增大趋势;当轴压比较小时(n∈(0,0.3]),轴压比对试件的抗剪承载力有一定的提高作用;当轴压比较大时(n∈(0.3,0.8]),随着轴压比的增加其抗剪承载力逐渐降低。最后,提出了十字形钢管束高强混凝土组合剪力墙的抗剪承载力计算公式。

钢框架+钢管混凝土束剪力墙结构装配式施工研究

以某市场升级改造工程为实例进行分析,研究钢框架和钢管混凝土束剪力墙结构体系在装配式施工中的应用。该工程采用了多层结构,其中地上主体结构采用了创新的钢框架和钢管混凝土束剪力墙结构,并详细探讨了该结构体系的结构优势以及装配率的计算方法。研究表明,钢管混凝土束组合结构住宅体系具有抗震性能好、施工周期缩短、工业化生产、现场装配化施工、节能环保等优点,对提高建筑工程的质量和效率具有重要意义。

装配式部分包覆钢-混凝土组合剪力墙受弯承载力计算

为研究装配式部分包覆钢-混凝土组合短肢剪力墙的受弯承载力和抗震性能,设计制作了5片短肢剪力墙。通过拟静力试验,分析轴压比、翼缘板厚度、混凝土强度和型钢强度对试件破坏形态、滞回性能、受弯承载力、变形能力、刚度退化和耗能能力的影响。试验结果表明:短肢剪力墙表现为典型的压弯破坏;轴压比由0.4增大至0.6,试件的承载力及延性均降低;翼缘板厚度的变化对试件的承载力和延性影响较小;随着混凝土和型钢强度的增大,试件的承载力随之增大;罕见地震作用下,试件表现出良好的抗震性能,提出部分包覆钢-混凝土组合剪力墙受弯承载力计算公式,计算结果与试验值吻合度较高。

螺旋箍筋约束钢管混凝土组合暗柱剪力墙抗震性能试验研究

研究以钢管等效代替约束边缘构件范围内的纵向受力钢筋,并在钢管外侧滚焊螺旋箍筋代替边缘构件箍筋的新型配置螺旋箍筋约束钢管混凝土组合暗柱的剪力墙结构的抗震性能.考虑高宽比、轴压比等参数设计制作新型配置螺旋箍筋约束组合暗柱的剪力墙与传统钢筋混凝土剪力墙进行低周反复荷载加载试验;分析了剪力墙的破坏形态、滞回性能、耗能能力、延性和刚度退化.研究结果表明:螺旋箍筋约束钢管混凝土组合暗柱对改善中高传统钢筋混凝土剪力墙承载能力和变形能力具有较好的效果,螺旋箍筋约束钢管混凝土组合暗柱的构造形式对耗散地震能量具有较好的作用.

钢筋混凝土扶壁卸荷板组合挡土墙卸荷效应研究

为了解决高填方边坡挡土结构内力大和工程成本高等难题,提出钢筋混凝土扶壁+卸荷板组合挡土墙形式,利用卸荷板的卸荷效应,降低墙后土压力,减小结构内力。将库伦滑动楔体理论和Klein方法结合,给出组合挡土墙土压力计算方法和挡土墙理论计算方法。针对大连20.5 m高填方边坡工程,采用组合挡土墙方案及理论计算方法,并研究组合挡土墙卸荷效应影响因素。结果表明:组合挡土墙结构剪力和弯矩的最大值均比扶壁式挡土墙的小将近1/3;现场监测结果与理论计算结果比较接近;影响组合挡土墙卸荷效应的因素主要是卸荷板埋置深度和卸荷板长度;从结构剪力及弯矩均衡的角度考虑,卸荷板最优设置方案为,卸荷板埋置深度为挡土墙高度的中间位置,卸荷板长度与其对应的挡墙段高度比值为1.2~1.5。

轴压比对T形钢管束混凝土组合剪力墙抗震性能的影响研究

为研究轴压比对T形钢管束混凝土组合剪力墙抗震性能的影响,本文运用数值模拟软件ABAQUS设计并建立了轴压比为0、0.1、0.2、0.3、0.4、0.5、0.6、0.7、0.8的九个试件,进行有限元分析,系统分析了试件的抗震性能。分析结果表明:随着轴压比增大,T形钢管束混凝土组合剪力墙的承载能力有所降低,耗能能力有所提高;当轴压比大于0.6时,初始刚度显著降低。