Mechanical Properties and Microstructure of Portland Cement Concrete Prepared with Coral Reef Sand

The feasibility of using coral reef sand（CRS） in Portland cement concrete is investigated by testing the mechanical property and microstructure of concrete. The composition, structure and properties of the CRS are analyzed. Mechanical properties and microstructure of concrete with CRS are studied and compared to concrete with natural river sand. The relationship between the microstructure and performance of CRS concrete is established. The CRS has a porous surface with high water intake capacity, which contributes to the mechanical properties of concrete. The interfacial transition zone between the cement paste and CRS is densified compared to normal concrete with river sand. Hydration products form in the pore space of CRS and interlock with the matrix of cement paste, which increases the strength. The total porosity of concrete prepared with CRS is higher than that with natural sand. The main difference in pore size distribution is the fraction of fine pores in the range of 100 nm.

Properties and Mechanism on Flexural Fatigue of Polypropylene Fiber Reinforced Concrete Containing Slag

Properties and mechanism were investigated on flexural fatigue of concrete containing polypropylene fibers and ground granulated blast furnace slag（GGBFS）.Four polypropylene fibers’volume fractions and five slag proportions were considered.An experiment was conducted to obtain the fatigue lives at three stress levels in 20 Hz frequency and at a constant stress level of 0.59 in four frequency respectively.Mechanism and evaluation were investigated based on the experimental data.Fatigue life span models were established.The results show that the addition of polypropylene fibers improves the flexural fatigue cumulative strength and fatigue life span.It is proposed that the slag particles and hydrated products improve Interfacial Transition Zone（ITZ）structure and benefit flexural fatigue performance.A composite reinforce effect is found with the incorporation of slag and polypropylene fibers.The optimum mixture contents 55%slag with 0.6%polypropylene fiber for the cumulative fatigue stress.Fatigue properties are decreased as the stress level increasing,the higher frequency reduces the fatigue strength more than lower frequency at a constant stress level.

Effect of CF and RPP on the Mechanical and Electrical Properties of Smart Aggregate

By using redispersible polymer powder（RPP） and carbon fiber（CF） to adjust the flexibility and electrical properties of the smart aggregate, a new kind of smart aggregate with Z type structure was proposed. The study shows that Z type aggregate is more sensitive to the feedback of external force than the prism aggregate in the same loading environment, and it indicates that Z type aggregate is more suitable for the research and application of concrete health monitoring. Although the incorporation of RPP would cause the compressive strength of the aggregates and the elastic modulus of hardened cement mortar to reduce slightly within the dosage of RPP by 2.25% because of the polymer film formed in the internal system, this would improve the deformability of the aggregates. In the early loading stage（in the first 60 seconds）, the intelligent concrete specimens implanted with Z type smart aggregate do not show higher sensitivity as expected, although the resistance change rate changes a little bit more, the overall of it is still in balance. Adding RPP could improve the flexibility of smart aggregates exactly, and it plays an active role in prolonging the life of the smart aggregates. By implanting Z type aggregates the damage and failure of the concrete structure could be predicted accurately in this study. The results of this paper will help to promote further research and application of intelligent concrete.

Properties and Microstructures of Full Graded Concrete Containing Varied Impurity Aggregate

We investigated mechanical properties of concretes made with impurity aggregates of different combinations. Besides the mechanisms were explored by EDS, CT, and hardness testing. The results showed that fully rust-stained and surface rust-stained sandstone aggregate had significant adverse impact on the compressive strength of concrete while sandstone aggregate had a much more obvious impact on the ultimate tension of concrete. Concrete crack was more prone to expand along surfaces and the micro-hardness of interfacial transition zone of different aggregates was ranked in decreasing trend as sandstone, slate, SR sandstone, marble, and FR sandstone. The cluster growth of long needle-like ettringite crystal and strong preferential growth trend of Ca（OH）2 crystals would result in wider interfacial transition zone range of concretes made with fully rust-stained sandstone and marble aggregate, respectively. Therefore, the impurity aggregate content should be strictly controlled during aggregate selection.

Modified Concrete Using Polyethylene Terephthalate Plastic Waste as a Partial Replacement for Coarse Aggregate

The present work evaluated the properties of modified concrete using polyethylene terephthalate (PET) bottle waste as a partial replacement for coarse aggregate. Modified concrete samples were designed using a water/cement (W/C) ratio of 0.50 and varying percentages of PET replacement (3%, 7%, 10%, and 15% by volume). Dreux Gorisse’s formulation approach was used to make the final products, and the mechanical properties of the samples were determined using Controlab presses. This modified concrete with PET chips has shown that with a 10% replacement of PET chips, the fresh density decreases by 3.56%, and the hardened state density decreases by 2.01%. The water absorption and thermal conductivity of the formulated concretes decreased. However, the results showed that the slump of these fresh concretes increased as the percentage of plastic aggregate replacement increased. Based on the results, incorporating PET aggregates into concrete contributes to good workability, and lightweight concrete structures, and provides some thermal comfort in concrete structures.

Influence of desert sand on the mechanical properties of concrete subjected to impact loading

A74-mm-diameter Split Hopkinson pressure bar was used to carry out the dynamic compression experiment of concrete made of desert sand.The dynamic failure processes of concrete different in specimen size,impact velocity,desert sand replacement ratio,size and volume content of coarse aggregate were simulated.Research results showed that concrete made of desert sand had size-effect and was rate-dependent.The peak stress of concrete made of desert sand declined with the minimum size of coarse aggregate.However,the peak stress of concrete made of desert sand increased first,and then declined with the volume content and maximum size of coarse aggregate.